Entel E-PoC Gateway 2.0 User manual

Designed in the United Kingdom
E-PoC Gateway 2.0
Connecting E-PoC to existing radio systems
Quick Start User Guide
Contact
For more information about our products, please contact us:
Entel UK, 320 Centennial Avenue Centennial Park, Elstree, Borehamwood, Hertfordshire WD6 3TJ, United Kingdom
[phone] [e-mail] entel.co.uk
All Rights Reserved. Copyright Entel UK Ltd.

Quick Start User Guide v.1.1
2.1 Ensure a suitable PMR antenna is connected.
2.2 Plug the LAN cable into the Gateway.
2.3 Apply power to the Gateway. The Gateway’s Power LED will illuminate green.
2.4 Once the Gateway has connected to the E-PoC Server the Gateway Status LED will blink
amber every 5-seconds.
5.1 Browse to pocentel.co.uk and log in.
5.2 Select the server
the Gateway is
being used on
and click ‘Manage
radios’.
You should see
the Gateway
serial number at
the top of the list.
5.3 You can now
congure the
Gateway’s E-PoC
Group etc. as well
as the Gateway
radio’s RF
channel, group
etc.
Amber ash every 5 seconds – Idle
(Wired LAN connected)
Green ash every 5 seconds – Idle
(Wi-Fi connected)
Green steady – Transmitting to PMR
(E-PoC Receiving)
Red steady – Transmitting to E-PoC
(PMR Receiving)
Amber steady – PMR Channel busy
1.0 CONTROLS & INDICATORS
2.0 HOW TO INSTALL: CONNECTING VIA A WIRED LAN 5.0 PROGRAMMING THE GATEWAY
6.0 STATUS LED
3.0 HOW TO INSTALL: CONNECTING VIA A WIRELESS LAN (WI-FI)
IMPORTANT
By using this product you agree to the terms and conditions of Entel’s E-PoC Service License which
can be viewed here: www.entel.co.uk/EPoC_LICENSE
1. Power LED
2. Status LED
3. PMR antenna
4. Wireless LAN (Wi-Fi) antenna
5. LAN cable socket
6. Wi-Fi conguration button
7. Power socket
123
4
5
6
7
3.1 Ensure a suitable PMR antenna is connected.
3.2 Ensure the wireless LAN (Wi-Fi) antenna is connected.
3.3 Press and hold the Wi-Fi conguration button then apply power to the Gateway. The Gateway’s
Power LED will illuminate green.
3.4 When you see the Status LED ashing red / green slowly, release the Wi-Fi conguration button.
3.5 Connect to the Gateway via its Wi-Fi hotspot using
your Smartphone, Tablet or PC.
The Gateway appears in your network list as
‘GW-’ (with the Gateways serial number appended).
Click on ‘Wi-Fi SETUP’.
NOTE: If your device does not automatically open the
webpage, browse to: 192.168.43.1
3.6 Enter Wi-Fi credentials and then click ‘APPLY’.
Your web browser will now return to the screen shown
in 3.4.
Click ‘DONE’ which will restart the Gateway and it
will then connect to your Wi-Fi network. This will be
conrmed by the Status LED ashing green every 5
seconds.
Entel’s E-PoC software has
been optimised in conjunction
with TASSTA GmbH
Amber slow ash – No Internet connection
Amber / red slow ash – No connection to E-PoC Server
Red / green slow ash – Wi-Fi conguration mode
Red / green rapid ash – Programming mode
Amber / red rapid ash – Bootloader mode
Red rapid ash – Settings transfer fail
Red rapid double ash – Error: E-PoC
Red slow ash – Critical error
4.0 NETWORK PORT SETTINGS
If you have a Firewall on your Gateways internet connection the following ports need to be open
(outgoing only).
4.1 To Entel’s provisioning server (provisioning.entelpoc.net):
1234 TCP
1235 TCP
1236 TCP
This is to enable remote programming of the Gateway by your Dealer.
4.2 To Entel’s E-PoC EMEA E-PoC server (emea1.entelpoc.net *)
80 TCP
443 TCP
4000 TCP
And your unique server port (which will be advised by your Dealer) that is TCP & UDP
* If you are using a different server please substitute the address accordingly.
4.3 To Entel’s update server (server1.entelpoc.net)
80 TCP
443 TCP
This is to allow for software updates. These ports must be opened to this server address no
matter which PoC server address you are using.

Designed in the United Kingdom
E-PoC Gateway 2.0
Connecting E-PoC to existing radio systems
Quick Start User Guide
Contact
For more information about our products, please contact us:
Entel UK, 320 Centennial Avenue Centennial Park, Elstree, Borehamwood, Hertfordshire WD6 3TJ, United Kingdom
[phone] [email protected] entel.co.uk
All Rights Reserved. Copyright Entel UK Ltd.