Entertainment Solutions RF05L User manual

RF05L Quick Start Guide
Packaging list
Total Remote V2 x 1
USB Reciver x 1
USB Cable x 1
Quick Start Guide x 1
Product overview

Buttons
Indicator
Button-press Be flickering
Matching process Be flickering
Success to match Be flickering for 2 seconds
Fail to match Be flickering for 30 seconds
Low battery Be flickering
Standby mode Go out
Match with the USB adapter
Step1. Connect the USB adapter .
Step2. Near to USB adapter within 20Cm, press and hold VoL+ button and VoL - button until
the orange indicator begin flickering.The orange indicator will go out in 2s after the match
process finished.
Working mode of the Air mouse
Mouse: Mouse, buttons, keyboard are available in mouse mode.

Game: Press Game button turn on or off game mode, mouse is not available in game mode.
Keyboard
QWERTY keyboard is available in the back of the Airmouse.
Press and hold Fn button to use the corresponding characters in blue color on the keyboard.
IR Learnig
1.Press and hold Info button for until the orange indicator keep flickering.
2.Put the TV remote control straight head to the Airmouse，2 to 3cm away.
3.Press the button which to learn on the airmouse, orange indicator will stop flickering.Then
press the button on your TV remote control. The orange indicator will be flickering while button
learning finished.
4.Repeat step3 to learn other buttons.
5.Press info button once to exit learning mode.
Power、VoL-、VoL+、Mute、Game buttons on this airmouse are allowed to learn.
Empty the button learning
Press Speaker and Phone button at the same time for 5seconds to empty the learned buttons.
Sleep and Wake up
Air-mouse will enter into standby mode automatically while there is no any operation within
1minitue. Press any button to wake up.
FCC STATEMENT：
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.