Enttec DINTEC 71015 User manual

Quick Start Manual
MANUAL-Wireless-DMX
For latest version visit:
www.enttec.com
1 ID: 192905
General Information
•The DINTEC Wireless DMX is a 2.4GHz wireless
device featuring wireless DMX transmitter and
receiver based on CRMX technology
•The Wireless transmitter takes one universe DMX
as input signal and transmits it to one or multiple
DINTEC Wireless DMX receivers.
•The DINTEC Wireless receivers will only link to
DINTEC Wireless transmitter and vice-versa.
•Only one DMX Transmitter is allowed, however
multiple DMX Receivers can be used in one setup.
•This device will require an external DC power
supply (9V-24VDC output, not included), for
normal operation.
Features
•2.4GHz wireless transmitter / receiver
•Fully compliant with USITT DMX512-A
•1-830Hz DMX frame rate
•Frame synchronisation is less than 0.01ms
•End-to-end DMX latency less than 5ms
•Automated cognitive coexistence
•One touch Link to pair devices
•Dynamic adaptive frequency hopping
•Recovery time upon loss of radio link is less than 1s
•Full DMX fidelity and frame integrity
•Error correction and packet recovery
•DIN RAIL mountable
Safety
Do not expose the DINTEC Wireless to rain or
moisture, doing this will void the warranty
Do not remove the cover, there are no serviceable
parts inside
This unit is intended for indoor use only
Applications
Employ the DINTEC Wireless system, if you need wireless
transmission between DMX devices. Example usages:
Architectural Lighting
Fixed installations
Stage lighting
Home improvements
Office lighting

Quick Start Manual
MANUAL-Wireless-DMX
For latest version visit:
www.enttec.com
2 ID: 192905
Tips for best performance
•Keep transmitter to receivers' line of sight
•Elevate the both transmitter and receiver above
any objects.
•Elevate above ground increase range achievable.
•Keep away from large metal objects
How to pair receiver(s):
1. Attach the antenna to DINTEC Wireless devices by
gently turning the bolt clockwise.
2. Connect power (9-24VDC) to POWER INPUT screw
terminals, as per the V+ and V- polarity. Warning:
Connecting power in a wrong polarity will
permanently damage the device.
3. Turn on the power for both transmitter and receivers.
The Power Indicator should turn on.
4. Ensure the RF LINK indicator on all receivers are off. If
RF LINK is on, please follow the unpair procedure
before you proceed next step.
5. On the transmitter, press and release the Link button.
The transmitter will search for a period of 10 seconds
for any unpaired receivers. The status indicator will
flash.
6. At the end of the search period, all RF LINK indicator
will be on for all the receivers. Which indicates that
they have been successfully paired with this
transmitter.
Item
Value
Power indicator
Always On (power)
Signal Strength
indicator
>80%
>60%
>40%
>20%
Transmitter:
Always Off
Receiver:
On: when signal strength is
greater
than 80%
On: when signal strength is
greater
than 60%
On: when signal strength is
greater
than 40%
On: when signal strength is
greater
than 20%
How to unpair receiver(s):
1. Unpair a single receiver: On the receiver, press and
hold the Link button for more than 3 seconds to
unpair if from a transmitter. The RF Link indicator will
turn off.
2. Unpair all: On the transmitter, press and hold it is
Link button for more than 3 seconds to unpair all the
paired receivers.

Quick Start Manual
MANUAL-Wireless-DMX
For latest version visit:
www.enttec.com
3 ID: 192905
Technical Specifications
Item
Value
Electrical
Input: 9-24V DC
Power: 5W Max
Supported
Protocols
USITT DMX 512
DMX
Number of Channels: 512
RF
Characteristics
Automated cognitive co-existence :
Yes
Dynamic adaptive frequency
hopping : Yes
Recoverable Radio Packet Error Rate :
30%
Operational frequency :
2402-2480 MHz
RF output : 100 mW (20 dBm)
RF modulation: GFSK
Sensitivity at 0.1% Packet Error Rate :
96 dBm
Operating range: 500m in outdoor
urban area
Wireless
Module
Approval
FCC: 15.247&68 Class B
Canada ICES 003 CE
EN 301489-1
EN 301 489-3
EN 300 328
SS-EN 61547:2009
EN60950
SRRC - China
ARIB STD-T66 - Japan
Connectors
Power: Screw Terminals
DMX: Screw Terminals
Antenna: SMA connector
Environment
Ambient: 20 C to +70 C
Humidity: 0-50% non-condensing
Due to continuous improvements and innovations of all
ENTTEC products, specifications and features are subject to
change without notice.
Physical Dimensions
Item
Value
Weight
0.24 lbs / 110g
Shipped Weight
0.24 lbs / 110g
Length
2.75” / 70mm
Width
1.93” / 57mm
Height
3.39” / 86mm
Ordering Information
The DINTEC Wireless DMX System and compatible products
can be ordered from our website or through your ENTTEC
dealer.
PN
Description
71015
DINTEC WIRELESS DMX
TRANSMITTER
71016
DINTEC WIRELESS DMX
RECEIVER
ENTTEC PTY LTD ENTTEC AMERICAS
17/5 Samantha Court 604A Cornerstone Ct.
Knoxfield Victoria 3180 Hillsborough NC 27278
Australia USA
Tel: [phone] Tel-Fax: [phone]
Fax: [phone]
Email: [email protected]om
Website: www.enttec.com