August MR260 Administrator Guide

How-To Guide
August MR260 Bluetooth Audio Transmitter / Receiver

Check You Have
All the
Components
•MR260 Transmitter / Receiver
•3.5mm Audio Jack Cable
•USB to Micro-USB Charging
Cable
•2 x RCA Audio Splitter Cable
•Instruction Manual
•Quick Start Guide

Ensure You Have The Adapter and
Two Audio Devices With You
•The Transmitter Mode will allow Non-Bluetooth MP3
Players, CD Players, TV's and more to play Bluetooth Audio
to wireless Speakers, Headphones or Earphones...
•The Receiver Mode will allow Non-
Bluetooth Speakers, Headphones and Earphones to play
Bluetooth Audio from phones, computer, tablet, laptops
and more...

Find the Audio-Out Port (To Transmit) or the
Audio-In Port (To Receive) on Your Device
The Transmitter will connect to an Audio output (Headphone) port with the included cable
The Receiver will connect to an Audio input port with the included cable
Your Audio Output Will Look Something Like
This on Your MP3 Player, CD Player or other
Audio Source
Your Audio Input Will Look Something Like
This on Your Speakers, Earphones or
Headphones

Connect The
MR260
Connect the other end of the
3.5mm cable into the
MR260 Adapter AUX Port

Enter Pairing Mode
Have the MR260 Enter Pairing Mode
- Ensure the Switch on the Side is set to RX (Receiver) or TX (Transmitter)
- Hold the Circular Button until the LED Flashes Red and Blue
Hold
Switch

Enter Pairing Mode (Transmitter)
Make Sure Your Audio Device is Also in Pairing Mode according to its own instructions
(If you are paring with an August product such as EP650 Headphones or EPG500 Earbuds, pairing
mode is symbolized by a Red and Blue Flashing LED)
Once the devices pair, the LED will be solid Blue
Keep the device close while waiting for the LED to turn Blue

Enter Pairing Mode (Receiver)
Make Sure Your Audio Source is Also In Pairing Mode
Mobile Computer
(Windows
11)

The LED Will Be Solid Blue –
Connected!
Any Audio From Your Source Device will now Play through the Adapter!