Enviro MQL B Series User manual
MQL • TABLE OF CONTENTS
2
Product Overview .....................................................................................................................................3
Features and Benefits...............................................................................................................................6
Application Considerations ......................................................................................................................5
Unit Configuration ...................................................................................................................................6
Electric Heat .............................................................................................................................................7
Coil and Filter Data ..................................................................................................................................9
Static Pressure Data ................................................................................................................................10
Weight and Electrical Data......................................................................................................................12
Fan Notes ................................................................................................................................................13
Fan Performance Data.............................................................................................................................14
Guide Specifications................................................................................................................................25
Metric Conversion Chart..........................................................................................................................28
Features and Options ..............................................................................................................................30
GENERAL NOTES
• Some drawings are not shown in this catalog. Please refer to www.enviro-tec.com for complete
submittal drawings for your project.
• All data herein is subject to change without notice. Refer to www.enviro-tec.com for current catalog
and submittal drawings.
• Drawings not for installation purposes; refer to IOM manual at www.enviro-tec.com.
• ETL Report Number 3017723-001.
• MEA Number MEA 107-02-E applies to all units with any combination of chilled water or R-22 direct
expansion coils and either hot water coils, steam coils, or electric heat.
ENVIRO-TEC
PRODUCT OVERVIEW • MQL
3
The Perfect Solution for Schools, Hospitals, and Commercial Buildings.
The flexibility of the Model MQL Blower Coil allows you to design the unit to meet the specific project
needs. The MQL design allows you to configure draw thru applications in horizontal, vertical, and foot-
print-saving arrangements. From basic air handling to the sophisticated isolation room systems required
to meet challenging indoor air quality (IAQ), controls, and acoustic (sound sensitive) projects – the Model
MQL Blower Coil is your solution!
Standard Features
• Modular construction allows for footprint saving arrangements including stacking modules in two-high
configuration.
• IAQ galvanized drain pans are double sloped to prevent standing water and minimize microbial growth.
Stainless steel drain pans are available.
• Removable access panels for improved accessibility, cleanability, and serviceability. Hinged access doors
with quick action latches are available.
• Single point power connection – even with draw thru or blow thru electric heat – simplifies installa-
tion. Fan motors are factory mounted and wired to the junction box.
• Available in nine sizes, from 600 to 10,000 CFM.
• Internal spring isolation standard on all unit sizes 02 - 17.
• Single wall and double wall-galvanized construction are available. Double wall construction enhances
indoor air quality, protects insulation, and provides the ability to clean the inside of the unit.
Optional Features
• Factory-packaged blower coils are available with starters or variable frequency drives, factory mounted
and wired. Simply connect power, piping, and ductwork, and the units are ready for operation. An
excellent way to minimize installation time, coordination and costs, while increasing reliability.
• Quiet, flexible, acoustical discharge plenums may be used for sound sensitive projects.
• Exhaust / Return Fan with Economizer Sections for use with IAQ applications (“free” heating and cool-
ing – cost savings for space conditioning).
• Customized Options including:
- Direct drive plug fans
- High efficiency filters
- Double wall perforated lining
- External face and bypass dampers
- Inspection windows
ENVIRO-TEC
MQL • FEATURES AND BENEFITS
4
Designed For Maximum
Flexibility
The ENVIRO-TEC®Model MQL
Blower Coil Unit is designed to
maximize flexibility of selection
and installation.
The unit is also designed to exceed
the stringent quality standards of
the institutional market, while
remaining cost competitive in the
light commercial segment of the
market.
ENVIRO-TEC®Model MQL sets the
new standard for quality, flexibil-
ity, and competitive pricing.
For the Building Designer:
OPTIONAL COMPONENTS
MEAN FLEXIBILITY
The extensive variety of standard
options available on the MQL is
where you find the versatility to
fit any HVAC system designer’s
needs.
Options include: Mixing boxes
with standard low leak dampers,
High efficiency filter sections for
2" prefilter and 4" final filter, blow
thru electric heat with single point
power connection. All electric
heat units are listed with ETL as
an assembly and carry the cETL
label.
High Efficiency motors, starters,
disconnects and fusing mean eas-
ier coordination between mechan-
ical and electrical trades.
Coil options allow for 4 or 6 row
cooling coils. Water coils have
optional circuiting that can be
used to reduce Water Pressure
Drop, which may also allow for
pipe size reductions and lower
material cost. Hot Water or
Standard Steam coils may be
placed in the Preheat or Reheat
position.
All Model MQL blower coils have
the option of foil faced insulation.
For the Contractor:
LOWER INSTALLED COST
Model MQL blower coils are
shipped completely assembled,
reducing field installation time
and labor. All units are thor-
oughly inspected and tested prior
to shipment, eliminating potential
problems at startup. Motor wiring
is brought to a junction box on the
outside of the unit casing, reduc-
ing electrical hook-up time.
A wide variety of fan discharge
configurations allow for increased
flexibility and easier installation on
the jobsite, resulting in cost reduc-
tions by eliminating expensive
elbows, etc.
For the Owner:
QUALITY PRODUCT
Model MQL blower coil units are
built from G60 minimum spangled
galvanized steel with a chromate
coating. This metal surpasses the
ASTM 125 hour salt spray test for
corrosion and rust. Standard insu-
lation is 1 inch fiberglass insulation
which is glued and pin spotted for
maximum positive adhesion.
Insulation complies with UL 181
and NFPA 90A.
All units, with or without Electric
Heat, are ETL listed and labeled.
All wiring is in compliance with
NEC, assuring safety and quality
for the owner.
ENVIRO-TEC
APPLICATION CONSIDERATIONS • MQL
5
Application Considerations
Model MQL blower coil units offer
a wide range of application flex-
ibility, while maintaining a simple,
easy to install unit design. These
units are intended to provide
comfort cooling and heating
within a small footprint. They
may be applied in many types of
building structures including
schools, office buildings, hospi-
tals, condominiums, assisted liv-
ing facilities, apartments or stores.
Applications can be constant or
variable volume.
There are many applications in
which the MQL product can be
utilized. Some examples include:
Constant volume applications
• Two-pipe hydronic system for
cooling and/or heating
• Two-pipe hydronic cooling
system with electric heat
• Four-pipe system with dedi-
cated heating and cooling
coils
• Direct Expansion (DX) split
systems with hydronic heat
• Direct Expansion (DX) split
systems with electric heat
Variable volume applications
• Two-pipe hydronic system for
cooling and/or heating.
• Two-pipe hydronic cooling
system with electric heat.
• Four-pipe system with dedi-
cated heating and cooling
coils.
Acoustics
Control of noise within both occu-
pied and unoccupied spaces has
become increasingly important
to designers and building own-
ers/occupants. Proper considera-
tion must be given to placement
of indoor air conditioning units,
particularly in the occupied space.
Inherent flexibility of the fan and
coil combination in the vertical
configuration allows application
in sound-sensitive areas. In such
instances, a fan running at low
speed with a high capacity coil
normally yields satisfactory
results. It also may be desirable to
select a larger nominal capacity
unit and operate it at a less than
nominal airflow for further
acoustic benefit.
Three phase motors are recom-
mended for sound-sensitive appli-
cations to avoid potential single
phase motor hum. Unit operation
in the stall region of the fan curve
is not recommended since it may
cause unsatisfactory noise levels
and excessive unit vibration.
Installation
These floor mounted or ceiling
hung units can be installed on a
base rail or hanger rods at the cor-
ner points. All units have internally
isolated fan decks; therefore, flex
connections are not required,
which will reduce installation
costs. One of the most important
and basic IAQ issues is condensate
management. The first step to
ensure trouble-free operation is
proper installation. It is very
important that the unit be
mounted high enough so that the
condensate drain from the unit
may be properly trapped. Please
refer to the MQL IOM Manual at
www.enviro-tec.com for specifics
on this issue. As with all HVAC sys-
tems, these units should be
installed according to all applica-
ble ASHRAE standards, SMACNA
and local code requirements.
Operating Limitations
Units must not be operated above
maximum fan speed or unit air-
flow as listed in the Fan
Performance section of this cata-
log. Unit operation at greater
than maximum fan speed could
drastically reduce bearing life and
may result in a catastrophic fail-
ure. Operating at greater than the
maximum allowable airflow in
the cooling mode may result in
unsatisfactory operation due to
moisture carry over from the coil.
In addition, it is often not eco-
nomical to operate a unit at its
maximum fan speed due to the
greater motor power require-
ments.
Units with electric heat should not
be operated with leaving air tem-
perature greater than 104°F, to
prevent excessive leaving air tem-
peratures and electric heat limit
trips. A hydronic (or steam) coil
and electric heat should not be
operated simultaneously to pre-
vent excessive leaving air tem-
peratures and limit trips. Electric
heat units are equipped with a
lockout switch that disables the
electric heater if the temperature
of the hydronic (or steam) coil is
greater than 104°F (40°C).
Water coils must not be operated
above a fluid velocity of 8 ft./sec.
to reduce the possibility of veloc-
ity induced erosion and flow
noise. Water coils must not be
operated below a fluid velocity of
1 ft./sec. to prevent degraded coil
performance caused by laminar
flow. These high or low fluid flow
rates may not be included in the
ARI coil certification.
ENVIRO-TEC
MQL • UNIT CONFIGURATION
6
Position: 1 2 3 45 6 7 8 9 10
MQL - Module Size Dim. 02 03 04 06 08 10 12 14 17
H - in (mm) 17-3/8 (441) 17-3/8 (441) 17-3/8 (441) 26-3/8 (670) 26-3/8 (670) 26-3/8 (670) 41-3/16 (1046) 41-3/16 (1046) 41-3/16 (1046)
W - in (mm) 28 (711) 34 (864) 42 (1069) 42 (1069) 46 (1168) 56 (1422) 64 (1626) 68 (1727) 80 (2032)
L - in (mm) 5-1/4 (133) 5-1/4 (133) 5-1/4 (133) 5-1/4 (133) 5-1/4 (133) 5-1/4 (133) 5-1/4 (133) 5-1/4 (133) 5-1/4 (133)
SAM Small Access H - in (mm) 22 (559) 22 (559) 22 (559) 30 (762) 34 (864) 34 (864) 44 (1118) 44 (1118) 44 (1118)
SCM Small Coil W - in (mm) 30 (762) 36 (914) 44 (1118) 44 (1118) 48 (1219) 58 (1473) 66 (1676) 70 (1778) 82 (2083)
SFM Small Flat Filters (2" and/or 4" Cartridge) L - in (mm) 15 (381) 15 (381) 15 (381) 15 (381) 15 (381) 15 (381) 15 (381) 15 (381) 15 (381)
MAM Medium Access H - in (mm) 22 (559) 22 (559) 22 (559) 30 (762) 34 (864) 34 (864) 44 (1118) 44 (1118) 44 (1118)
MCM Medium Coil W - in (mm) 30 (762) 36 (914) 44 (1118) 44 (1118) 48 (1219) 58 (1473) 66 (1676) 70 (1778) 82 (2083)
MFM
Med. INTELLITRAC®Mix. Box w/Flat Filters (2") L - in (mm) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762)
MIM
Med. INTELLITRAC®Inlet Plenum w/Flat Filters (2")
MMM Medium Mixing Box with Flat Filters (2")
MRM Medium Inlet Plenum with Flat Filters (2")
MVM Medium V-Bank Filters (2")
HFM Horizontal FC Fan H - in (mm) 22 (559) 22 (559) 22 (559) 30 (762) 34 (864) 34 (864) 44 (1118) 44 (1118) 44 (1118)
HPM Horizontal Plug Fan W - in (mm) 30 (762) 36 (914) 44 (1118) 44 (1118) 48 (1219) 58 (1473) 66 (1676) 70 (1778) 82 (2083)
RFM Return FC Fan L - in (mm) 32 (813) 32 (813) 32 (813) 36 (914) 36 (914) 36 (914) 40 (1016) 40 (1016) 40 (1016)
RPM Return Plug Fan
VCM Vertical Coil
VFM Vertical FC Fan
MBM Medium Face & Bypass H - in (mm) 30 (762) 30 (762) 30 (762) 40 (1016) 46 (1168) 46 (1168) 56 (1422) 58 (1473) 58 (1473)
MTM Medium Tall Coil W - in (mm) 30 (762) 36 (914) 44 (1118) 44 (1118) 48 (1219) 58 (1473) 66 (1676) 70 (1778) 82 (2083)
STM Small Tall Coil L - in (mm) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762)
H - in (mm) 22 (559) 22 (559) 22 (559) 30 (762) 34 (864) 34 (864) 44 (1118) 44 (1118) 44 (1118)
W - in (mm) 30 (762) 36 (914) 44 (1118) 44 (1118) 48 (1219) 58 (1473) 66 (1676) 70 (1778) 82 (2083)
L - in (mm) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762) 30 (762)
LAM Large Access H - in (mm) 22 (559) 22 (559) 22 (559) 30 (762) 34 (864) 34 (864) 44 (1118) 44 (1118) 44 (1118)
LFM
Lg. INTELLITRAC®Mix. Box w/V-Bank Filters (2") W - in (mm) 30 (762) 36 (914) 44 (1118) 44 (1118) 48 (1219) 58 (1473) 66 (1676) 70 (1778) 58 (1473)
LIM
Lg. INTELLITRAC®Inlet Plenum w/V-Bank Filters (2") L - in (mm) 42 (1067) 42 (1067) 42 (1067) 42 (1067) 42 (1067) 42 (1067) 42 (1067) 42 (1067) 42 (1067)
LMM Large Mixing Box with V-Bank Filters (2")
LRM Large Inlet Plenum with V-Bank Filters (2")
LPM Large Discharge Plenum
FCM FC Fan and Coil Combination (Horizontal Only) H - in (mm) 22 (559) 22 (559) 22 (559) 30 (762) 34 (864) 34 (864) 44 (1118) 44 (1118) 44 (1118)
HEM Horizontal Economizer W - in (mm) 30 (762) 36 (914) 44 (1118) 44 (1118) 48 (1219) 58 (1473) 66 (1676) 70 (1778) 82 (2083)
H - in (mm) 13-1/2 (343) 13-1/2 (343) 13-1/2 (343) 18 (457) 18 (457) 18 (457) 21 (533) 21 (533) 21 (533)
W - in (mm) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 17 (432) 17 (432) 17 (432) 24 (610) 24 (610) 24 (610)
L - in (mm) 22 (559) 22 (559) 22 (559) 22 (559) 22 (559) 22 (559) 22 (559) 22 (559) 22 (559)
Electric Heat Draw Thru
Electric Heat Blow Thru
External Flat Filters (2")
UNIT CONFIGURATION (IN DIRECTION OF AIRFLOW)
EHD
EHB
EFM
Upper Deck - B
Lowe r Deck - A
Notes:
1. All dimensions are +
1/4" (6mm). Metric
values are soft
conversions.
2. Section images are for
identification of unit
configuration only.
See individual section
submittal drawings at
www.enviro-tec.com
for details.
3. Certain configuration
rules apply; see cata-
log and selection
program for details.
4. All data subject to
change without
notice.
Fig. 1
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 3
Fig. 4
Fig. 4
Fig. 5
ENVIRO-TEC
ELECTRIC HEAT • MQL
7
STANDARD FEATURES
• G60 galvanized steel casing
• Flanged construction for direct unit
mounting, in blow thru configuration
• Listed for zero clearance installation
• Meets National Electrical Code requirements
• Ni-Chrome wire in ceramic insulators
• Stainless steel element terminals
and hardware
• Element support brackets on maximum
3 1/2" centers
• Solid cover with continuous full height hinge
• Overtemperature protection
• All internal wiring rated for 105°C minimum
• Airflow switch
• Incoming line power distribution block
• ETL Listed in compliance with UL/ANSI Standard 1995
• Single point power connection
• Heater factory mounted to unit with ETL listing as an
assembly
OPTIONAL FEATURES
• Main incoming power disconnect (non-fused) (fused)
• Fusing (main) (per stage)
• Magnetic contactors wired
for disconnecting operation
• Solid state relay with 4-20 mA,
thermistor 0-135 Ohm,
0-16 VDC, or 6-9 VDC control
• Fan control package with heater interlock
contacts (required for single point power connection)
• De-rated elements (for longer life)
Blow Thru
(installed on unit discharge)
Side View Front View
Airflow Draw Thru
(installed upstream of fan)
Side View
Airflow
VOLTAGE
115/1
208/1
230/1
277/1
208/3
230/3
460/3
575/3
4.81
4.35
3.61
HEATER AMP CALCULATION
AMPs per kW
8.70
1.00
2.78
2.51
1.26
1.Refer to MCA/MOP Calculator at www.enviro-tec.com for MCA and/or MOP calculations.
2. Non-Fused Door Interlock Disconnect Switch shall be sized according to MCA.
3. Fused Door Interlock Disconnect Switch and Main Fusing shall be sized according to MOP.
4. Heaters above 480v must utilize one time secondary limits only.
Plan View
ENVIRO-TEC
MQL • ELECTRIC HEAT
8
Notes:
1. Blow thru heaters can have a maximum of two stages.
2. VFD controllers cannot be supplied with blow thru heaters.
3. Specific kW ratings are available within the ranges shown. Refer to selection program.
4. Heaters above 480v must utilize one time secondary limits only.
Notes:
1. Draw thru heaters can have a maximum of four stages.
2. All heaters that have an AMP draw greater than 48 AMPs will have a minimum of two stages.
3. Specific kW ratings are available within the ranges shown. Refer to selection program.
4. Heaters above 480v must utilize one time secondary limits only.
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
kW353545
AMPs 26.1 43.5 26.1 43.5 34.8 43.5
kW3103104106.016716920
AMPs 14.4 48.1 14.4 48.1 19.2 48.1 28.8 76.9 33.7 76.9 43.3 96.2
kW3113114116.018718922
AMPs 13.0 47.8 13.0 47.8 17.4 47.8 26.1 78.3 30.4 78.3 39.1 95.7
kW3133134136.022722926
AMPs 10.8 46.9 10.8 46.9 14.4 46.9 21.7 79.4 25.3 79.4 32.5 93.9
kW3133204264.026728934124614461646
AMPs 8.3 36.1 8.3 55.5 11.1 72.2 11.1 72.2 19.4 77.7 25.0 94.4 33.3 127.7 38.9 127.7 44.4 127.7
kW3133204264.026732934124914491649
AMPs 7.5 32.6 7.5 50.2 10.0 65.3 10.0 65.3 17.6 80.3 22.6 85.3 30.1 123.0 35.1 123.0 40.2 123.0
kW3133204264.026752964127614881696
AMPs 3.8 16.3 3.8 25.1 5.0 32.6 5.0 32.6 8.8 65.3 11.3 80.3 15.1 95.4 17.6 110.4 20.1 120.5
kW3133204264.026752964127614881696
AMPs 3.0 13.1 3.0 20.1 4.0 26.1 4.0 26.1 7.0 52.2 9.0 64.3 12.0 76.3 14.1 88.4 16.1 96.4
UNIT
VOLTAGE
AND PHASE
DRAW-T HRU EL ECTRIC HEAT
Unit Size
02
03
04
06
08
10
12
14
17
Single Phase
115
230
208
277
Three Phase
208
230
460
575
Min Ma x Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
kW353545
AMPs 26.1 43.5 26.1 43.5 34.8 43.5
kW3939496979
AMPs 14.4 43.3 14.4 43.3 19.2 43.3 28.8 43.3 33.7 43.3
kW3113114116.011711911
AMPs 13.0 47.8 13.0 47.8 17.4 47.8 26.1 47.8 30.4 47.8 39.1 47.8
kW3133134136.013713913
AMPs 10.8 46.9 10.8 46.9 14.4 46.9 21.7 46.9 25.3 46.9 32.5 46.9
kW3133164164.01671691612161416
AMPs 8.3 36.1 8.3 44.4 11.1 44.4 11.1 44.4 19.4 44.4 25.0 44.4 33.3 44.4 38.9 44.4
kW3133184184.018718918121814181618
AMPs 7.5 32.6 7.5 45.2 10.0 45.2 10.0 45.2 17.6 45.2 22.6 45.2 30.1 45.2 35.1 45.2 40.2 45.2
kW3133204264.026738938123814381638
AMPs 3.8 16.3 3.8 25.1 5.0 32.6 5.0 32.6 8.8 47.7 11.3 47.7 15.1 47.7 17.6 47.7 20.1 47.7
kW3133204264.026746946124614461646
AMPs 3.0 13.1 3.0 20.1 4.0 26.1 4.0 26.1 7.0 46.2 9.0 46.2 12.0 46.2 14.1 46.2 16.1 46.2
06
08
UNIT
VOLTAGE
AND PHASE
Three Phase
208
230
460
575
BLOW- THRU ELECTRIC HEAT
Unit Size
14
17
10
12
04
Single Phase
02
03
208
230
277
115
ENVIRO-TEC
COIL AND FILTER DATA • MQL
9
ENVIRO-TEC®offers hot water, chilled water, direct expansion (DX), and standard steam coils for specific
application with all Model MQL blower coils. Coils tested in accordance with ARI 410, and strict on-site
inspection before, during, and after installation guarantees the highest quality and performance available.
Standard Features
• ENVIRO-TEC® coils are designed, manufactured and
tested by Johnson Controls
• 1/2" O.D. seamless copper tubes
• Aluminum fin construction with die-formed spacer
collars for uniform spacing
• Mechanically expanded copper tubes leak tested to a
minimum 450 PSIG air pressure under water
• Manual air vent plug on all water coils
• Copper ODM sweat connections
• 300 PSIG working pressure at 200°F
• Evaporator coils are factory sealed and charged with a
minimum of 5 PSIG nitrogen or refrigerated dry air
• Refrigerant coils are provided with a fixed orifice dis-
tributor. Thermal expansion valves are not included.
• Steam coils rated at maximum for 15 PSIG
• 0.016" tube wall thickness (0.025" on steam)
Optional Features
• Stainless steel coil casings
• Automatic air vents on water coils
• Elevated working pressure ratings
• Heat pump compatible cooling coils
• Double circuit DX coils (50-50 split)
• 0.025" tube wall thickness
Coil
Face Area Qty. Dimensions Face Area Qty. Dimensions Face Area
02 2.1 [0.20] 1 16x20x2 [406x508x51] 2.2 [0.20] 2 16x20x2 [406x508x51] 4.4 [0.41]
03 2.9 [0.27] 1 16x25x2 [406x635x51] 2.8 [0.26] 2 16x25x2 [406x635x51] 5.6 [0.52]
04 3.8 [0.35] 2 16x20x2 [406x508x51] 4.4 [0.41] 2 20x25x2 [508x635x51] 6.9 [0.64]
06 5.6 [0.52] 2 20x25x2 [508x635x51] 6.9 [0.64] 4 20x20x2 [508x508x51] 11.1 [1.03]
08 7.4 [0.69] 2 20x25x2 [508x635x51] 6.9 [0.64]
2
2
16x20x2 [406x508x51]
20x25x2 [508x635x51]
11.4 [1.06]
10 9.7 [0.90]
1
2
16x25x2 [406x635x51]
20x25x2 [508x635x51]
9.7 [0.90]
2
4
16x20x2 [406x508x51]
20x20x2 [508x508x51]
15.6 [1.45]
12 12.6 [1.17] 4 20x25x2 [508x635x51] 13.9 [1.29] 6 20x25x2 [508x635x51] 20.8 [1.93]
14 14.3 [1.33] 8 16x20x2 [406x508x51] 17.8 [1.65]
3
6
20x25x2 [508x635x51]
20x20x2 [508x508x51]
27.1 [2.52]
17 17.0 [1.58] 6 20x25x2 [508x635x51] 20.8 [1.93] 12 20x20x2 [508x508x51] 33.3 [3.09]
COIL AND FILTER DATA
Unit Sizes
V-Bank Filters
Flat Filters
NOTES:
1. Standard filters are 2" throwaway; optional filters are 2" pleated.
2. Filter sizes are nominal and standard size, measured in inches [millimeters].
3. Coil and filter face areas are measured in square feet [square meters].
4. Cooling and heating coils have same face area.
5. For coil connection sizes, refer to the ENVIRO-TEC®Coil Selection Program.
ENVIRO-TEC
MQL • STATIC PRESSURE DATA
10
Mixing
Box
Econo-
mizer
Filter
Modules
Access
Modules
Plenum
Module
Econo-
mizer
Blow
Thru
Draw
Thru
600 0.01 0.02 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.04 0.02 0.04 0.02 0.01
850 0.02 0.04 0.02 0.02 0.03 0.03 0.04 0.03 0.04 0.06 0.04 0.07 0.04 0.01
975 0.02 0.04 0.02 0.02 0.04 0.04 0.04 0.04 0.04 0.07 0.05 0.09 0.06 0.01
1100 0.03 0.05 0.03 0.03 0.05 0.05 0.05 0.05 0.05 0.08 0.06 0.11 0.08 0.01
900 0.01 0.02 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.06 0.02 0.06 0.05 0.01
1250 0.02 0.04 0.02 0.02 0.03 0.03 0.04 0.03 0.04 0.09 0.03 0.10 0.10 0.01
1425 0.03 0.05 0.02 0.02 0.04 0.04 0.05 0.04 0.05 0.11 0.04 0.13 0.13 0.01
1600 0.03 0.06 0.03 0.03 0.05 0.05 0.06 0.05 0.06 0.13 0.05 0.16 0.17 0.01
1200 0.01 0.02 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.04 0.02 0.07 0.09 0.01
1600 0.02 0.03 0.02 0.02 0.03 0.03 0.03 0.03 0.03 0.06 0.03 0.12 0.17 0.01
1800 0.02 0.04 0.02 0.02 0.04 0.04 0.04 0.04 0.04 0.07 0.04 0.15 0.21 0.01
2000 0.03 0.05 0.02 0.02 0.04 0.04 0.05 0.04 0.05 0.09 0.05 0.19 0.27 0.01
1800 0.01 0.02 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.04 0.02 0.07 0.04 0.01
2500 0.02 0.04 0.02 0.02 0.03 0.03 0.04 0.03 0.04 0.06 0.03 0.13 0.09 0.01
2850 0.03 0.05 0.02 0.02 0.04 0.04 0.05 0.04 0.05 0.08 0.04 0.17 0.12 0.01
3200 0.03 0.06 0.03 0.03 0.05 0.05 0.06 0.05 0.06 0.09 0.05 0.21 0.15 0.01
2300 0.01 0.02 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.03 0.02 0.06 0.07 0.01
3250 0.02 0.04 0.02 0.02 0.03 0.03 0.04 0.03 0.04 0.05 0.03 0.12 0.15 0.01
3725 0.03 0.05 0.02 0.02 0.04 0.04 0.05 0.04 0.05 0.06 0.04 0.16 0.20 0.01
4200 0.03 0.06 0.03 0.03 0.05 0.05 0.06 0.05 0.06 0.07 0.05 0.20 0.26 0.01
2900 0.01 0.02 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.09 0.12 0.01
4100 0.02 0.04 0.02 0.02 0.03 0.03 0.04 0.03 0.04 0.04 0.03 0.17 0.25 0.01
4700 0.03 0.05 0.02 0.02 0.04 0.04 0.05 0.04 0.05 0.06 0.04 0.22 0.33 0.01
5300 0.03 0.06 0.03 0.03 0.05 0.05 0.06 0.05 0.06 0.07 0.05 0.27 0.42 0.01
3800 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.04 0.02 0.08 0.07 0.01
5325 0.02 0.03 0.01 0.01 0.02 0.02 0.03 0.02 0.03 0.07 0.04 0.16 0.14 0.01
6090 0.02 0.03 0.02 0.02 0.03 0.03 0.03 0.03 0.03 0.09 0.05 0.21 0.18 0.01
6850 0.02 0.04 0.02 0.02 0.03 0.03 0.04 0.03 0.04 0.11 0.06 0.26 0.23 0.01
4400 0.01 0.02 0.01 0.01 0.01 0.01 0.02 0.01 0.02 0.02 0.02 0.08 0.09 0.01
6200 0.02 0.03 0.02 0.02 0.03 0.03 0.03 0.03 0.03 0.04 0.03 0.15 0.19 0.01
7100 0.02 0.04 0.02 0.02 0.03 0.03 0.04 0.03 0.04 0.05 0.04 0.20 0.25 0.01
8000 0.03 0.05 0.02 0.02 0.04 0.04 0.05 0.04 0.05 0.07 0.05 0.25 0.32 0.01
5100 0.01 0.02 0.01 0.01 0.01 0.01 0.02 0.01 0.02 0.02 0.02 0.10 0.13 0.01
7225 0.02 0.03 0.02 0.02 0.03 0.03 0.03 0.03 0.03 0.04 0.04 0.20 0.26 0.01
8290 0.02 0.04 0.02 0.02 0.03 0.03 0.04 0.03 0.04 0.05 0.05 0.26 0.35 0.01
9350 0.02 0.04 0.02 0.02 0.04 0.04 0.04 0.04 0.04 0.06 0.06 0.33 0.45 0.01
17
06
08
10
12
14
02
03
04
MFM
LFM
LPM
SFM
MVM
EHD
SCM
MCM
VCM
HEM
FCM
RFM
VFM
SAM
MAM
LAM
EHB
MMM
LMM
HEM
COMPONENT AIR PRESSURE DROP (IN. W.G.)
Unit
Size
CFM
Cabinet Losses
Da m pe r Losse s
Electric Heater
Losse s
Fan Modules
Coil Modules
Mixing Box
MFM
LFM
MMM
LMM
Notes:
1. Figures do not include pressure drop of internal filter media. Refer to Air Pressure Drop Through Filter Section
table for filter air pressure drop adders.
2. Figures do not include pressure drop of internal heating and/or cooling coils. Refer to Air Pressure Drop Through
Dry Coil Section table for coil air pressure drop adders.
3. Mixing box with single damper in fully opened position operating at 100% air volume.
4. Economizer with outside air and exhaust dampers in fully opened position operating at 100% air volume.
Section Pressure Drops
ENVIRO-TEC
STATIC PRESSURE DATA • MQL
11
Filter Size &
Type Efficiency 200 250 300 350 400 450 500 550 600 650 700 750 800
2" @ 30% 0.12 0.15 0.18 0.21 0.24 0.27 0.30 0.33 0.36 0.39 0.42 0.45 0.48
4" @ 65% 0.18 0.23 0.27 0.32 0.36 0.41 0.45 0.50 0.54 0.59 0.63 0.68 0.72
4" @ 85% 0.26 0.33 0.39 0.46 0.52 0.59 0.65 0.72 0.78 0.85 0.91 0.98 1.04
4" @ 95% 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.83 0.90 0.98 1.05 1.13 1.20
AIR PRESSURE DROP THROUGH FILTER SECTION (IN. W.G.)
Air Velocity (FPM)
High
Efficiency
Pleated
Notes:
1. Figures listed represent air pressure drop of clean filters.
2. Usable pressure drop across pleated media not recommended to exceed 1.0 inch w.g.
3. Air velocities associated with pressure drops in the shaded region not recommended.
Note: Dehumidifying cooling coils with face velocities exceeding 525 fpm not recommended.
200 250 300 350 400 450 500 550 600 650 700 750 800
8 0.01 0.02 0.03 0.04 0.05 0.05 0.06 0.08 0.09 0.10 0.11 0.13 0.14
10 0.02 0.03 0.03 0.04 0.05 0.06 0.07 0.09 0.10 0.11 0.13 0.15 0.16
12 0.02 0.03 0.04 0.05 0.06 0.07 0.09 0.10 0.11 0.13 0.15 0.16 0.18
14 0.02 0.03 0.04 0.05 0.07 0.08 0.10 0.11 0.13 0.14 0.16 0.18 0.20
8 0.03 0.04 0.06 0.07 0.09 0.11 0.13 0.15 0.17 0.20 0.23 0.25 0.28
10 0.04 0.05 0.07 0.09 0.11 0.13 0.15 0.17 0.20 0.23 0.26 0.29 0.32
12 0.04 0.06 0.08 0.10 0.12 0.14 0.17 0.20 0.23 0.26 0.29 0.33 0.36
14 0.05 0.07 0.09 0.11 0.13 0.16 0.19 0.22 0.25 0.29 0.33 0.36 0.40
8 0.04 0.06 0.09 0.11 0.14 0.16 0.19 0.23 0.26 0.30 0.34 0.38 0.42
10 0.05 0.08 0.10 0.13 0.16 0.19 0.22 0.26 0.30 0.34 0.39 0.44 0.48
12 0.06 0.09 0.12 0.15 0.18 0.22 0.26 0.30 0.34 0.39 0.44 0.49 0.55
14 0.07 0.10 0.13 0.16 0.20 0.24 0.29 0.33 0.38 0.43 0.49 0.55 0.61
8 0.06 0.09 0.11 0.15 0.18 0.22 0.26 0.30 0.35 0.40 0.45 0.51 0.57
10 0.07 0.10 0.13 0.17 0.21 0.25 0.30 0.35 0.40 0.46 0.52 0.58 0.65
12 0.08 0.12 0.15 0.19 0.24 0.29 0.34 0.40 0.46 0.52 0.58 0.65 0.73
14 0.09 0.13 0.17 0.22 0.27 0.32 0.38 0.44 0.51 0.58 0.65 0.73 0.81
8 0.09 0.13 0.17 0.22 0.27 0.33 0.39 0.45 0.52 0.60 0.68 0.76 0.85
10 0.11 0.15 0.20 0.26 0.32 0.38 0.45 0.52 0.60 0.69 0.78 0.87 0.97
12 0.12 0.17 0.23 0.29 0.36 0.43 0.51 0.59 0.68 0.78 0.88 0.98 1.09
14 0.14 0.20 0.26 0.33 0.40 0.48 0.57 0.66 0.76 0.87 0.98 1.09 1.21
8 0.12 0.17 0.23 0.29 0.36 0.44 0.52 0.61 0.70 0.80 0.90 1.01 1.13
10 0.14 0.20 0.27 0.34 0.42 0.51 0.60 0.70 0.80 0.92 1.04 1.16 1.29
12 0.16 0.23 0.31 0.39 0.48 0.58 0.68 0.79 0.91 1.04 1.17 1.31 1.45
14 0.19 0.26 0.35 0.44 0.54 0.65 0.76 0.89 1.02 1.15 1.30 1.46 1.62
8
6
AIR PRESSURE DROP THROUGH DRY COIL SECTION (IN. W.G.)
1
2
3
4
Fins per Inch
Air Velocity (FPM)
Rows
Filter Pressure Drops
Coil Pressure Drops
ENVIRO-TEC
Coil Weight Data
8 FPI 10 FPI 12 FPI 14 FPI 8 FPI 10 FPI 12 FPI 14 FPI 8 FPI 10 FPI 12 FPI 14 FPI
1 10 [5] 11 [5] 11 [5] 11 [5] 12 [5] 12 [5] 13 [6] 13 [6] 12 [5] 12 [5] 13 [6] 13 [6]
2 16 [7] 16 [7] 17 [8] 18 [8] 19 [9] 20 [9] 21 [10] 21 [10] 20 [9] 20 [9] 21 [10] 22 [10]
3 21 [10] 22 [10] 23 [11] 24 [11] 27 [12] 28 [13] 29 [13] 30 [14] 27 [12] 28 [13] 29 [13] 30 [14]
4 28 [13] 29 [13] 30 [14] 32 [14] 35 [16] 36 [16] 37 [17] 39 [18] 35 [16] 36 [16] 38 [17] 39 [18]
6 40 [18] 42 [19] 44 [20] 46 [21] 51 [23] 53 [24] 55 [25] 57 [26] 51 [23] 53 [24] 55 [25] 58 [26]
8 57 [26] 61 [28] 65 [30] 69 [31] 71 [32] 75 [34] 79 [36] 83 [38] 72 [33] 76 [34] 80 [36] 84 [38]
1 13 [6] 13 [6] 13 [6] 14 [6] 15 [7] 16 [7] 16 [7] 17 [8] 15 [7] 16 [7] 16 [7] 17 [8]
2 19 [9] 20 [9] 21 [10] 22 [10] 24 [11] 25 [12] 26 [12] 27 [12] 25 [11] 26 [12] 27 [12] 28 [13]
3 26 [12] 28 [13] 29 [13] 31 [14] 34 [15] 35 [16] 37 [17] 38 [17] 34 [15] 36 [16] 37 [17] 39 [17]
4 34 [15] 36 [16] 38 [17] 40 [18] 44 [20] 46 [21] 48 [22] 50 [23] 44 [20] 46 [21] 48 [22] 50 [23]
6 50 [23] 53 [24] 56 [25] 59 [27] 64 [29] 67 [31] 70 [32] 73 [33] 65 [20] 68 [31] 71 [32] 74 [34]
8 71 [32] 76 [34] 81 [37] 86 [39] 89 [41] 95 [43] 100 [45] 105 [47] 91 [41] 96 [43] 101 [46] 106 [48]
1 15 [7] 15 [7] 16 [7] 17 [8] 18 [8] 18 [8] 19 [9] 20 [9] 18 [8] 19 [9] 19 [9] 20 [9]
2 23 [11] 24 [11] 26 [12] 27 [12] 29 [13] 30 [14] 32 [15] 33 [15] 30 [13] 31 [14] 32 [15] 33 [15]
3 32 [14] 33 [15] 35 [16] 37 [17] 40 [18] 42 [19] 44 [20] 46 [21] 41 [19] 43 [19] 45 [20] 47 [21]
4 41 [19] 44 [20] 46 [21] 49 [22] 53 [24] 55 [25] 58 [26] 60 [27] 54 [24] 56 [25] 59 [27] 61 [28]
6 60 [27] 64 [29] 68 [31] 72 [33] 78 [35] 82 [37] 86 [39] 89 [41] 79 [36] 83 [38] 87 [39] 90 [41]
8 80 [36] 85 [38] 90 [41] 95 [43] 103 [47] 108 [49] 113 [51] 118 [54] 105 [47] 110 [50] 115 [52] 120 [54]
1 19 [9] 20 [9] 21 [10] 22 [10] 24 [11] 25 [11] 26 [12] 27 [12] 24 [11] 25 [11] 26 [12] 27 [12]
2 32 [14] 34 [15] 36 [16] 38 [17] 41 [19] 43 [20] 45 [20] 47 [21] 42 [19] 43 [20] 45 [20] 47 [21]
3 45 [20] 48 [22] 50 [23] 53 [24] 58 [26] 61 [28] 64 [29] 67 [30] 59 [27] 62 [28] 65 [29] 67 [30]
4 59 [27] 62 [28] 66 [30] 70 [32] 76 [35] 80 [36] 84 [38] 88 [40] 77 [35] 81 [37] 85 [39] 89 [40]
6 87 [39] 92 [42] 98 [44] 104 [47] 113 [51] 119 [54] 124 [56] 130 [59] 115 [52] 120 [55] 126 [57] 132 [60]
8 117 [53] 125 [57] 133 [61] 142 [64] 152 [69] 160 [73] 169 [77] 177 [80] 155 [70] 163 [74] 171 [78] 179 [81]
1 23 [11] 25 [11] 26 [12] 27 [12] 30 [14] 31 [14] 32 [15] 33 [15] 30 [14] 31 [14] 32 [15] 34 [15]
2 40 [18] 43 [19] 45 [20] 48 [22] 52 [24] 54 [25] 57 [26] 59 [27] 53 [24] 55 [25] 58 [26] 60 [27]
3 57 [26] 61 [27] 64 [29] 68 [31] 75 [34] 78 [36] 82 [37] 86 [39] 76 [34] 79 [36] 83 [38] 87 [39]
4 75 [34] 80 [36] 85 [38] 90 [41] 98 [45] 103 [47] 108 [49] 113 [51] 100 [45] 105 [47] 110 [50] 115 [52]
6 111 [50] 118 [54] 126 [57] 133 [60] 146 [66] 153 [69] 161 [73] 168 [76] 148 [67] 155 [70] 163 [74] 170 [77]
8 157 [71] 169 [77] 182 [83] 195 [88] 204 [92] 216 [98] 229 [104] 241 [110] 207 [94] 219 [99] 232 [105] 245 [111]
1 28 [13] 30 [13] 31 [14] 33 [15] 36 [16] 37 [17] 39 [18] 40 [18] 36 [16] 38 [17] 39 [18] 41 [18]
2 48 [22] 51 [23] 54 [25] 57 [26] 63 [28] 66 [30] 69 [31] 72 [33] 64 [29] 67 [30] 70 [32] 73 [33]
3 68 [31] 73 [33] 77 [35] 82 [37] 90 [41] 95 [43] 99 [45] 104 [47] 91 [41] 96 [44] 101 [46] 106 [48]
4 89 [41] 96 [43] 102 [46] 108 [49] 119 [54] 125 [57] 131 [60] 138 [62] 120 [55] 127 [58] 133 [60] 139 [63]
6 133 [60] 142 [64] 152 [69] 161 [73] 176 [80] 186 [84] 195 [88] 204 [93] 179 [81] 188 [85] 198 [90] 207 [94]
8 183 [83] 197 [90] 212 [96] 226 [103] 241 [109] 255 [116] 270 [122] 284 [129] 244 [111] 259 [117] 273 [124] 288 [131]
1 35 [16] 37 [17] 39 [18] 42 [19] 45 [21] 48 [22] 50 [23] 52 [24] 46 [21] 48 [22] 50 [23] 52 [24]
2 62 [28] 66 [30] 70 [32] 74 [34] 81 [37] 86 [39] 90 [41] 94 [43] 83 [38] 87 [39] 91 [41] 95 [43]
3 88 [40] 94 [43] 101 [46] 107 [49] 118 [53] 124 [56] 130 [59] 137 [62] 119 [54] 126 [57] 132 [60] 139 [63]
4 116 [53] 125 [57] 133 [60] 142 [64] 155 [70] 164 [74] 172 [78] 181 [82] 158 [72] 166 [75] 175 [79] 184 [83]
6 173 [78] 186 [84] 199 [90] 211 [96] 231 [105] 244 [111] 257 [117] 270 [122] 235 [107] 248 [112] 261 [118] 274 [124]
8 233 [106] 251 [114] 269 [122] 287 [130] 311 [141] 329 [149] 347 [157] 365 [165] 316 [143] 334 [151] 352 [160] 370 [168]
1 39 [18] 41 [19] 44 [20] 46 [21] 50 [23] 53 [24] 55 [25] 58 [26] 51 [23] 54 [24] 56 [25] 58 [26]
2 69 [31] 74 [33] 78 [36] 83 [38] 91 [41] 96 [43] 101 [46] 106 [48] 92 [42] 97 [44] 102 [46] 107 [49]
3 98 [45] 106 [48] 113 [51] 120 [55] 132 [60] 139 [63] 146 [66] 154 [70] 134 [61] 141 [64] 149 [67] 156 [71]
4 130 [59] 140 [63] 149 [68] 159 [72] 174 [79] 184 [83] 194 [88] 203 [92] 177 [80] 187 [85] 197 [89] 206 [94]
6 194 [88] 208 [94] 223 [101] 237 [108] 260 [118] 274 [124] 289 [131] 303 [138] 264 [120] 279 [126] 293 [133] 308 [140]
8 272 [123] 295 [134] 318 [144] 341 [155] 359 [163] 382 [173] 405 [184] 428 [194] 365 [166] 388 [176] 411 [186] 434 [197]
1 45 [20] 48 [22] 51 [23] 53 [24] 58 [26] 61 [28] 64 [29] 67 [30] 59 [27] 62 [28] 65 [29] 68 [31]
2 79 [36] 85 [39] 91 [41] 97 [44] 106 [48] 112 [51] 117 [53] 123 [56] 108 [49] 113 [51] 119 [54] 125 [57]
3 114 [52] 122 [56] 131 [59] 140 [63] 153 [69] 162 [73] 170 [77] 179 [81] 155 [71] 164 [74] 173 [78] 181 [82]
4 150 [68] 162 [73] 173 [79] 185 [84] 203 [92] 214 [97] 226 [102] 237 [108] 206 [93] 217 [99] 229 [104] 240 [109]
6 224 [102] 241 [109] 259 [117] 276 [125] 302 [137] 319 [145] 336 [153] 354 [160] 307 [139] 324 [147] 341 [155] 359 [163]
8 206 [93] 206 [93] 206 [93] 206 [93] 309 [140] 309 [140] 309 [140] 309 [140] 315 [143] 315 [143] 315 [143] 315 [143]
06
COIL WEIGHTS
40% GLYCOL
100% WATER
DRY COIL
17
UNIT
SIZE
COIL
ROWS
08
10
12
14
02
03
04
NOTE: Unit weight data is shipping weight in pounds [kilograms].
MQL • WEIGHT DATA
12
ENVIRO-TEC
WEIGHT AND ELECTRICAL DATA • MQL
13
Motor Electrical Data
NOTES:
1. Actual motor nameplate AMPs may vary, but will not exceed values shown.
2. Consult factory for applications requiring special motors.
115/1 208/1 230/1 277/1 208/3 230/3 460/3 575/3
1/3 6.3 3.5 3.2 2.6 1.7 1.5 0.8 -
1/2 7.8 4.3 3.9 3.6 2.2 2.1 1.1 0.9
3/4 10.6 5.4 5.3 5.0 3.2 3.0 1.5 1.2
1 15.0 8.3 7.5 5.5 4.0 3.6 1.8 1.4
11/2 ----5.35.02.51.9
2 ----7.06.43.22.5
3 ----9.19.04.53.2
5 ----14.212.86.45.2
71/2 ----22.221.610.88.2
10 ----28.628.414.211.4
15 ----44.940.620.316.2
MAXIMUM MOTOR AMPERAGE
HORSEPOWER
VOLTAGE
Motor/Drive Weight Data
1/3 1/2 3/4 1 1 1/2 2 3 5 7 1/2 10 15
ODP 25 [11] 28 [13] 30 [762]
35 [16] 45 [20] 35 [16] 75 [34] 100 [45] 125 [57] 125 [57] 220 [100]
TEFC 28 [13] 35 [16] 33 [338]
45 [20] 65 [29] 70 [32] 85 [39] 105 [48] 145 [66] 160 [73] 295 [134]
E+ N/A N/A N/A
40 [18] 55 [25] 55 [25] 90 [41] 100 [45] 145 [66] 130 [59] 300 [136]
2 SPEED 45 [20] 35 [16] 33 [338]
45 [20] 40 [18] 70 [32] 75 [34] N/A N/A N/A N/A
MOTOR WEIGHTS
MOTOR HORSEPOWER
MOTOR TYPE
NOTES:
1. Includes motor, pulleys, belts, and motor base.
2. Motor/drive weight data is shipping weight in pounds [kilograms].
General Fan Notes
Forward Curved Fans (Belt Drive)
1. Consult factory for applications at operating conditions not in the following table and curves.
2. Fan motor voltage, fan rotation, and fan RPM may require field setting/adjustment.
3. Drive losses not included in fan performance table and curves.
4. In direction of airflow, after fan discharge – only LPM (Large Plenum) and EHB (Electric Heat Blow Thru) are available.
5. Section will have internal isolation.
Plug Fans (Direct Drive)
1. Consult factory for applications at operating conditions not in the following table and curves.
2. VFD's are recommended for operation and field balancing of units whether factory supplied and factory mounted, field
supplied and factory mounted, or field supplied and field mounted.
3. In direction of airflow, there must be space prior to the plug fan inlet. For sizes 02 through 06, the minimum requirement
is either an SAM (Small Access) or an MCM (Medium Coil). For sizes 08 through 17, the minimum requirement is an MAM
(Medium Access).
4. Section will have internal isolation.
ENVIRO-TEC
MQL • FAN PERFORMANCE DATA
14
Forward Curved Fan Performance Data
TSP UNIT SIZE
(in-wg) Actual CFM 650 750 850 950 1050 950 1100 1250 1400 1550 1200 1400 1600 1800 2000
RPM ––––––––––––––1793
BHP ––––––––––––––1.99
RPM –––––––––1913 ––––1663
BHP –––––––––1.41––––1.75
RPM ––––1782 – – – 1747 1753 – – – 1517 1526
BHP ––––0.76–––1.061.21–––1.301.51
RPM – – – 1594 1605 – – 1562 1567 1580 – – 1357 1366 1383
BHP – – – 0.55 0.63 – – 0.75 0.87 1.01 – – 0.92 1.09 1.29
RPM – – 1382 1395 1415 – 1353 1360 1375 1395 – 1175 1186 1204 1231
BHP – – 0.37 0.43 0.50 – 0.50 0.59 0.70 0.82 – 0.61 0.74 0.89 1.08
RPM 1126 1136 1154 1181 1215 1107 1117 1136 1161 1195 962 976 1000 1035 *
BHP 0.18 0.22 0.27 0.32 0.39 0.29 0.36 0.43 0.52 0.63 0.35 0.44 0.56 0.71 *
RPM 829863904**814846***718****
BHP 0.100.140.18**0.170.22***0.22****
TSP UNIT SIZE
(in-wg) Actual CFM 1900 2200 2500 2800 3100 2400 2800 3200 3600 4000 3100 3600 4100 4600 5100
RPM ––––1482 ––––1490 – – 1234 1239 1245
BHP ––––2.80––––3.70––3.504.074.70
RPM – – – 1371 1376 – – – 1379 1384 – 1141 1145 1151 1160
BHP – – – 2.14 2.48 – – – 2.83 3.27 – 2.60 3.07 3.59 4.18
RPM – – 1251 1256 1264 – – – 1263 1273 – 1044 1049 1057 1070
BHP – – 1.58 1.85 2.16 – – – 2.44 2.85 – 2.22 2.64 3.12 3.68
RPM – – 1123 1132 1143 – – 1129 1139 1155 933 938 945 958 975
BHP – – 1.32 1.57 1.85 – – 1.73 2.06 2.44 1.51 1.84 2.22 2.67 3.19
RPM – 973 983 995 1010 – 978 990 1007 1028 812 820 833 852 875
BHP – 0.88 1.07 1.29 1.53 – 1.14 1.39 1.69 2.04 1.18 1.47 1.82 2.23 2.71
RPM 798 809 823 842 * 801 816 835 858 * 673 689 711 * *
BHP 0.52 0.65 0.81 1.00 * 0.66 0.85 1.07 1.33 * 0.87 1.12 1.43 * *
RPM 590****598*********
BHP 0.32****0.42*********
TSP UNIT SIZE
(in-wg) Actual CFM 3900 4600 5300 6000 6700 4600 5400 6200 7000 7800 5200 6200 7200 8200 9200
RPM – – – 1065 1068 – – – 1077 1081 – – 1078 1084 1094
BHP – – – 5.13 5.94 – – – 6.59 7.55 – – 6.82 8.06 9.49
RPM – – – 987 994 – – – 1000 1005 – – 1001 1009 1021
BHP – – – 4.50 5.28 – – – 5.75 6.64 – – 5.96 7.12 8.46
RPM – – 901 906 915 – – 911 917 925 – 911 919 930 944
BHP – – 3.28 3.90 4.63 – – 4.21 4.93 5.75 – 4.21 5.13 6.20 7.44
RPM – 805 809 819 832 – 814 819 827 838 814 819 830 844 862
BHP – 2.25 2.74 3.32 3.99 – 2.92 3.48 4.13 4.88 2.79 3.48 4.31 5.29 6.44
RPM 697 701 711 724 741 705 710 718 729 743 708 718 733 751 773
BHP 1.42 1.78 2.22 2.7500 3.35 1.86 2.28 2.78 3.36 4.03 2.17 2.78 3.52 4.40 5.45
RPM 574 585 600 619 * 581 591 604 620 638 588 604 624 * *
BHP 1.02 1.34 1.72 2.18 * 1.31 1.67 2.09 2.60 3.19 1.57 2.09 2.74 * *
RPM 428****431448***444****
BHP 0.65****0.801.08***1.00****
17
3.5
1.0
0.5
3.0
2.5
2.0
1.5
1.0
0.5
12
14
2.5
06
2.0
1.5
03
04
3.5
3.0
08
10
2.0
1.5
1.0
0.5
3.5
3.0
2.5
02
* Contact factory.
ENVIRO-TEC
FAN PERFORMANCE DATA • MQL
15
Plug Fan Performance Data
TSP UNIT SIZE
(in-wg) Actual CFM 450 650 850 1050 1250 650 900 1150 1400 1650 800 1150 1500 1850 2200
RPM 2870 2881 2950 3068 3246 2869 2877 2931 3017 3170 2868 2890 2974 3122 3318
BHP 0.92 1.08 1.24 1.42 1.65 1.32 1.52 1.71 1.92 2.20 1.58 1.85 2.13 2.48 2.91
RPM 2704 2725 2805 2946 3135 2703 2721 2786 2891 3048 2701 2734 2829 3000 3218
BHP 0.79 0.93 1.07 1.25 1.47 1.13 1.31 1.48 1.68 1.94 1.36 1.59 1.85 2.19 2.63
RPM 2527 2559 2651 2816 3028 2526 2555 2632 2761 2927 2524 2572 2683 2870 3111
BHP 0.67 0.79 0.91 1.08 1.31 0.96 1.10 1.26 1.46 1.70 1.15 1.35 1.59 1.89 2.34
RPM 2336 2387 2499 2677 2913 2336 2380 2466 2622 2812 2340 2406 2543 2748 2996
BHP 0.55 0.65 0.77 0.92 1.15 0.79 0.91 1.05 1.24 1.49 0.94 1.12 1.34 1.65 2.04
RPM 2139 2207 2347 2552 2788 2141 2199 2313 2479 2687 2146 2226 2391 2622 2871
BHP 0.44 0.52 0.63 0.79 0.98 0.62 0.73 0.86 1.03 1.27 0.75 0.90 1.10 1.40 1.74
RPM 1924 2007 2179 2413 2660 1926 2000 2145 2340 2549 1931 2037 2236 2484 2759
BHP 0.33 0.40 0.50 0.65 0.83 0.47 0.56 0.68 0.85 1.04 0.56 0.69 0.89 1.15 1.54
RPM 1683 1810 2020 2257 2542 1687 1797 1975 2183 2420 1698 1846 2079 2343 2641
BHP 0.23 0.29 0.39 0.50 0.71 0.32 0.40 0.52 0.66 0.88 0.39 0.51 0.69 0.94 1.31
RPM 1415 1597 1833 2117 2401 1419 1580 1788 2029 2280 1433 1644 1904 2202 2500
BHP 0.14 0.19 0.27 0.41 0.55 0.20 0.27 0.36 0.52 0.69 0.24 0.35 0.51 0.75 0.99
RPM 1118 1366 1650 1940 2239 1128 1345 1595 1848 2112 1153 1422 1721 2030 2344
BHP 0.07 0.11 0.18 0.28 0.40 0.10 0.15 0.24 0.34 0.50 0.12 0.21 0.33 0.52 0.75
TSP UNIT SIZE
(in-wg) Actual CFM 1200 1700 2200 2700 3200 1600 2300 3000 3700 4400 1900 2800 3700 4600 5500
RPM – – 2074 2056 2081 1605 – 1728 1755 1812 – – 1727 1754 1812
BHP – – 3.25 3.55 3.89 2.65 – 3.99 4.47 5.10 – – 4.95 5.57 6.38
RPM – – 1946 1944 1979 1520 1646 1633 1670 1733 – 1650 1632 1669 1733
BHP – – 2.79 3.06 3.40 2.29 3.06 3.44 3.91 4.49 – 3.79 4.27 4.87 5.61
RPM – – 1810 1823 1871 1429 1532 1532 1581 1649 – 1535 1531 1579 1649
BHP – – 2.35 2.59 2.93 1.95 2.57 2.90 3.37 3.89 – 3.18 3.61 4.19 4.86
RPM – 1700 1679 1707 1763 1332 1410 1432 1490 1572 – 1413 1429 1488 1572
BHP – 1.73 1.93 2.17 2.47 1.61 2.11 2.42 2.85 3.37 – 2.61 3.00 3.54 4.21
RPM – 1541 1539 1581 1645 1226 1289 1326 1391 1488 – 1288 1323 1389 1488
BHP – 1.37 1.54 1.76 2.03 1.29 1.67 1.97 2.34 2.83 – 2.07 2.44 2.91 3.54
RPM – 1368 1394 1451 1531 1166 1159 1214 1299 1407 – 1158 1211 1296 1407
BHP – 1.03 1.18 1.38 1.63 1.07 1.26 1.54 1.89 2.39 – 1.56 1.90 2.35 2.99
RPM 1202 1192 1238 1313 1411 998 1025 1096 1200 1320 1002 1021 1091 1197 1320
BHP 0.61 0.71 0.85 1.03 1.27 0.74 0.91 1.14 1.48 1.93 0.91 1.11 1.41 1.84 2.42
RPM 967 999 1071 1172 1288 817 876 976 1098 1229 817 870 970 1094 1229
BHP 0.36 0.44 0.56 0.73 0.94 0.44 0.58 0.80 1.11 1.49 0.54 0.71 0.98 1.37 1.87
RPM 706 784 895 1021 1159 617 720 848 992 1140 609 710 841 987 1140
BHP 0.16 0.22 0.32 0.45 0.67 0.20 0.32 0.50 0.80 1.14 0.24 0.38 0.61 0.98 1.43
TSP UNIT SIZE
(in-wg) Actual CFM 2600 3800 5000 6200 7400 2900 4300 5700 7100 8500 3400 4800 6200 7600 9000
RPM 1576 1604 1592 1584 1645 1584 1613 1563 1625 1722 1413 1436 1426 1413 1460
BHP 3.98 5.04 5.93 6.72 7.79 4.25 5.47 6.32 7.47 8.95 5.11 6.34 7.38 8.28 9.47
RPM 1490 1516 1484 1508 1581 1498 1524 1488 1560 1661 1336 1357 1330 1345 1402
BHP 3.46 4.39 5.09 5.88 6.92 3.69 4.77 5.53 6.64 8.02 4.44 5.53 6.34 7.25 8.42
RPM 1398 1422 1378 1429 1512 1406 1411 1407 1491 1604 1254 1273 1231 1273 1341
BHP 2.94 3.76 4.32 5.07 6.06 3.15 4.02 4.75 5.81 7.16 3.78 4.73 5.36 6.24 7.37
RPM 1300 1316 1291 1355 1442 1307 1287 1320 1417 1541 1166 1176 1154 1205 1275
BHP 2.45 3.13 3.62 4.35 5.24 2.63 3.30 4.00 4.98 6.26 3.15 3.93 4.50 5.33 6.32
RPM 1192 1182 1197 1274 1375 1197 1167 1239 1348 1477 1068 1056 1069 1133 1215
BHP 1.98 2.47 2.95 3.63 4.49 2.12 2.64 3.33 4.26 5.42 2.54 3.11 3.67 4.44 5.42
RPM 1071 1042 1102 1192 1300 1076 1063 1150 1273 1424 960 934 984 1057 1148
BHP 1.52 1.87 2.34 2.95 3.70 1.63 2.05 2.67 3.51 4.88 1.96 2.36 2.90 3.60 4.46
RPM 933 924 1001 1107 1238 918 952 1062 1203 1364 831 828 893 981 1088
BHP 1.09 1.35 1.75 2.3000 3.20 1.14 1.51 2.07 2.95 4.12 1.39 1.70 2.18 2.81 3.79
RPM 736 797 898 1029 1167 746 835 971 1132 1175 661 716 801 909 1024
BHP 0.65 0.89 1.23 1.83 2.50 0.70 1.02 1.55 2.33 2.82 0.83 1.12 1.53 2.21 2.99
RPM 558 660 798 857 1023 579 718 788 982 1175 507 595 711 753 891
BHP 0.30 0.48 0.82 1.00 1.00 0.34 0.62 1.00 1.00 1.00 0.40 0.62 1.01 1.25 1.25
2.0
1.5
1.0
0.5
4.0
3.5
3.0
2.5
17
2.0
1.5
1.0
0.5
3.0
2.5
12
14
10
2.0
1.5
1.0
0.5
04
4.5
4.0
3.5
4.5
4.5
02
03
3.0
2.5
06
08
4.0
3.5
ENVIRO-TEC
MQL • FAN PERFORMANCE CURVES
16
MQL02 (Fan 09-04 Class I)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
CFM
STATIC PRESSURE - INCHES WATER GAUGE
1/3 HP
1/2 HP
1 HP
600
800
1000
1200
1400
1600
1800
2000
2200 RPM
3/4 HP
1.5 HP
2 HP
MQL03 (Fan 09-06 Class I)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
CFM
STATIC PRESSURE - INCHES WATER GAUGE
600
800
1000
1200
1400
1600
1800
2000 RPM
1/3 HP
1/2 HP
3/4 HP
1 HP
1.5 HP
2 HP
SE = CFM x SP
6362 x BHP
SE = CFM x SP
6362 x BHP
ENVIRO-TEC
FAN PERFORMANCE CURVES • MQL
17
MQL06 (Fan 12-09 Class I)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800
CFM
STATIC PRESSURE - INCHES WATER GAUGE
600
800
1000
1200
1400 RPM
1/2 HP
3/4 HP
1 HP
1.5 HP
3 HP
400
2 HP
MQL04 (Fan 10-07 Class I)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
CFM
STATIC PRESSURE - INCHES WATER GAUGE
600
800
1000
1200
1400
1600
1800 RPM
1/3 HP
1/2 HP
3/4 HP
1 HP
1.5 HP
2 HP
SE = CFM x SP
6362 x BHP
SE = CFM x SP
6362 x BHP
ENVIRO-TEC
MQL • FAN PERFORMANCE CURVES
18
MQL08 (Fan 12-12 Class I)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4600 4800 5000 5200
CFM
STATIC PRESSURE - INCHES WATER GAUGE
600
800
1000
1200
1400 RPM
3 HP
1/2 HP
3/4 HP
1 HP
1.5 HP
5 HP
2 HP
MQL10 (Fan 15-11 Class I and II)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4600 4800 5000 5200 5400 5600 5800
CFM
STATIC PRESSURE - INCHES WATER GAUGE
600
800
1000
1200 RPM
1.5 HP
1 HP
3/4 HP
5 HP
3 HP
2 HP
400
CLASS I
CLASS II
SE = CFM x SP
6362 x BHP
SE = CFM x SP
6362 x BHP
ENVIRO-TEC
FAN PERFORMANCE CURVES • MQL
19
MQL12 (Fan 18-13 Class I and II)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500
CFM
STATIC PRESSURE - INCHES WATER GAUGE
600
1000 RPM
1 HP
1.5 HP
2 HP
3 HP
5 HP
7.5 HP
400
800
CLASS I
CLASS II
SE = CFM x SP
6362 x BHP
MQL14 (Fan 18-18 Class I and II)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000
CFM
STATIC PRESSURE - INCHES WATER GAUGE
800
7.5 HP
1 HP
1.5 HP
2 HP
1000 RPM
5 HP
3 HP
600
400
CLASS I
CLASS II
SE = CFM x SP
6362 x BHP
ENVIRO-TEC
MQL • FAN PERFORMANCE CURVES
20
MQL17 (Fan 18-18 Class I and II)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 10500 11000 11500 12000 12500 13000
CFM
STATIC PRESSURE - INCHES WATER GAUGE
600
800
1000 RPM
10 HP
1.5 HP
15 HP
7.5 HP
5 HP
3 HP
2 HP
400
CLASS I
CLASS II
SE = CFM x SP
6362 x BHP
MQL02 Plug Fan
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
0 200 400 600 800 1000 1200 1400
CFM
STATIC PRESSURE - INCHES WATER GAUGE
1/3 HP
1/2 HP
1 HP
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3/4 HP
3000 RPM
1.5 HP
SE = CFM x SP
6362 x BHP
ENVIRO-TEC
Other manuals for MQL B Series
1
Table of contents
Other Enviro Blower manuals
