envivo 1318 User manual

Manual
Wireless Speaker Bug

2
Content
Welcome................................................ 3
Contents.................................................5
After sales support ................................ 5
Specifications ........................................6
Overview ................................................ 8
Getting Started....................................10
Speaker Charging...............................20
Compatibility .......................................22
Safety precautions..............................22
Trouble shooting..................................24
Disclaimer.............................................30
Disposal.................................................31
Warranty...............................................33
Warranty Card.....................................35

3
Welcome
You have made an excellent choice
with the purchase of this quality
EnVivo brand product.
By doing so you now have the
assurance and peace of mind which
comes from purchasing a product
that has been manufactured to the
highest standards of performance
and safety, supported by the high
quality standards of EnVivo.
We want you to be completely
satisfied with your purchase, so this

4
EnVivo product is backed by a
comprehensive manufacturer’s 3
year warranty and an out-standing
after sales service through our
dedicated Helpline.
We hope you will enjoy using your
purchase for many years to come.
Before installing and using the
product, please read the instructions
thoroughly, and retain them for future
reference.
Hope you have a pleasant
experience.

5
Contents
Wireless Speaker Bug
USB cable
Audio cable
User manual with warranty card
After sales support
Email:
[e-mail]
Tel.No. for the UK:
0844 800 5893
Tel. No. for Ireland:
1890 917 060

6
Specifications
Wireless Speaker Bug with built-in
lithium battery
Bluetooth V3.0
Transmission distance up to 10 m
USB charging voltage: DC 5V
Output power: 3W
Battery capacity: 3.7V/450mA
Playing time up to 5 hours
3.5 mm audio input
Handsfree function for call
Model no: ENV-1318
Bluetooth version: BLUETOOTH V3.0

7
Transmission distance: ≤10M (this
may vary according to
environment and connected
Bluetooth device)
USB charge voltage: DC 5V
Lithium battery: 3.7V Lithium
chargeable battery, 450mAh
Output power: 3W
Frequency: 20Hz-20KHz
Sensitivity: 70db
Signal to noise ratio: ≥85dB
Unit size: 75×75×67 mm
Unit weight: 220 g

8
Overview
1) ON / OFF switch
2) Line in hole
3) Mini USB

9
4) LED indicator 5) Vol. - / previous track
6) Play/Pause/Pick up/End call
7) Vol. + / next track
8) MIC

10
Getting Started
Key functions
1. ON/OFF: Slide power switch to
‘ON’or ‘OFF’to turn the speaker
on and off.
2. ‘Line in’: Aux input slot, use the
provided Aux-in cable to connect
your Mobile, Tablet, iPad, MP3
Player etc. to play music
3. Mini USB: Use the provided USB
cable for charging the unit
through your computer.
4. LED indicator: Blue light indicates

11
working, red light indicates
charging.
5. ‘-‘: Decrease volume/prev. track
6. ‘ ’: Play/Pause/Pick up/End
call
7. ‘+’: Increase volume/next track
8. MIC: Microphone
Operating the speaker
A. Power On Status
Slide the Power switch to the “ON”
position at the bottom of the unit and
you will hear a voice saying

12
“Bluetooth already opened” and you
will see a blue light from the LED
indicator.
B. Power Off
Slide the Power Switch to the “OFF”
position and the speaker shuts down.
C. Bluetooth Pairing
If the speaker has never been paired
with a bluetooth device before, you
need to follow the instructions below
to pair your speaker with your
bluetooth device.
1) After hearing the voice prompt”

13
Waiting for bluetooth
connection”, the speaker is ready
to pair with your bluetooth device
and the Blue LED light will be
blinking fast.
2) Activate bluetooth on your
compatible device and set it to
search for compatible devices.
3) Select the speaker “ENV-1318”
from the list of found devices.
Note: If the speaker is already
connected to another bluetooth
device then the speaker will not

14
appear in search list and you need to
disconnect the current paired
bluetooth device from the speaker
and search again.
4) If your device asks for a passkey,
enter digits “0000” and press “OK”
(varies depending on the
bluetooth device manufacturer,
model and software version).
5) If the pairing is successful, the
speaker will have Voice Prompt
“Bluetooth Connected success-
fully` and the Blue LED light

15
indicator will flash with an interval
of two seconds, and your speaker
is ready to play music and receive
calls from mobiles.
Note: If the speaker has been paired
to the bluetooth device before, you
need to follow the pairing instructions
below to connect the speaker to the
bluetooth device:
Activate bluetooth on your
compatible device, turn on the
speaker and the speaker will connect
automatically to the compatible

16
device and you will hear a Voice
Prompt “Bluetooth connected
successfully”.
D. Playing Music in Bluetooth Mode
After the bluetooth device is
connected successfully to the
speaker, you will be able to play
music from your Bluetooth device.
Short press` ` to pause music and
short press ` ` again to resume
music.
Short press `+` for next song and
short press `-` for previous song.

17
Long press `+` to increase volume
and long press ` -` to decrease
volume.
E. Using the Speaker as Hands-free
Wireless Speaker Phone
When your device is paired with the
speaker and you get an incoming
call or making an outgoing call, the
speaker will shift from music mode to
call mode automatically. If you get
an incoming call, press to pick
up the call. After completing the call

18
press “ ” to hang up. The music
will automatically resume after the
call is disconnected.
F. Using the Speaker in AUX-In Mode
Plug one end of the 3.5 mm Audio
Cable into the headphone or line out
of your MP3 Player, Mobile or
computer and plug the other end of
the cable into the Aux-In jack of the
Speaker. You will hear Voice Prompt
“Now is Aux in mode”, and you can
play music from your device.

19
Short press ` ` to Mute Music and
short press ` ` again to Unmute
Music.
Long or short press `+` to Increase
volume, and Long or short press `-` to
Decrease Volume.
Note: In Aux-in mode, you cannot
press `+` or `-`.
Choose next volume or last volume.

20
Speaker Charging
The speaker comes with a built-in
rechargeable battery. Connect the
USB cable provided to a computer or
into a DC 5V power adaptor (not
included). When the speaker is set to
`OFF` you will hear a voice saying
`Charging` and the LED light will turn
Red. If the speaker is on, you will not
hear a voice saying `Charging` when
you start charging it. The charging
time is approximately 4 hours. Unplug