Eon GCHD Mk-II User manual

L3 C H D
GAMECUBE HD AD AFTER
OPERATIONS MANUAL

GCHD Mk-II INSTALLATION
GCHD Mk-II only operates on
GameCubes with the model
number DOL-001 (first gen).
Make sure your GameCube has the
digital AV out port as shown in the
diagram on the right.
General Set Up Instructions
Step 1: Firmly plug GCHD MkII into both digital and analog AV ports.
Step 2: Attach desired cables (HDMI or Wii Component/SCART) from
GCHD MkII to your TV.
Step 3: Attach power supply to GameCube.
Enabling Progressive Scan Mode (480p mode)
Step 4: Hold "B" while booting games to enable Progressive Scan Mode
when available.
Step 5: Enjoy lagless HD play in the highest native resolution possible on
_ the original hardware.

IR SENSOR INSTRUCTIONS
N
\/\
Further customize your experience g
with the GCHD Mk-II's IR menu. Use P
any universal IR remote to access this BBeDD G:-6414
eature.
Cll mma - £3
IR Remote Set Up Instructions
Try your universal IR remote in DVD or Blu-ray mode for better tivit
Step 1: Power on console with your new GCHD MkII firmly plugged in.
Step 2: Press and hold the IR activation button on your GCHD MkII.
Step 3: Using the on screen prompts, pair your universal IR remote to
control the on screen menu.
Step 4: Adjust on screen settings to your liking, including adding scan
lines and line doubling!
Wii U Remote Set Up Instructions
Did you know you can sync your Wii U Gamepad to your GCHD Mk-1! ?
Step 1: In your Wii U, go to settings >> TV Only > US Logic {signal type 1)
Step 2: Point the IR sensor on the Gamepad and use the face buttons,
D-pad, or even the touch screen to control the IR menu.

EXCLUSIVE Mk-Il FEATURES
A) Analog & Optical Digital Audio
Your new MkII includes a 3.5 mm jack with analog and optical digital audio
output. Simply connect any 3.5 mm auxiliary cable or a Mini TOSLINK
optical fiber connector for direct audio output from your GameCube.
With EON's custom firmware, the GCHD Mk-!I is the most comprehensive
solution for your GameCube audio and video needs. Ever.
B) Wii Component & SCART port
The MkII also supports a high quality analog video output in the form of
YPbPr or RGB. To use, simply plug in a Wii Component or Scart cable.
Supported Video Formats: Ypbpr, RGBS, RGsB
A CAUTION: Upgradeable Firmware
The GCHD MkII firmware is upgradeable via SPI. However, we do not advise
this and if you choose to attempt a firmware change, this will void your
warranty. For more firmware details, please contact [email protected].

Copyright Information
Copyright (C) 2014-2018, Ingo Korb <[email protected]>
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE. '

CITRUS