EOS Eos Core System User manual

Quick Start Guide
Setting Up Your Eos System
1. Connect the power adapter
cord to the Base Station
(jack marked “DC15V”)
2. Connect the power supply
to the wall outlet.
3. Select the correct universal
iPod docking adapter for your
iPod (See section on“Selecting
the correct universal iPod
docking adapter”.)
4. Place iPod in dock.
5. Plug your Wireless Speaker
into any wall outlet.
6. Turn the volume knob clock-
wise to apply power to the
Wireless Speaker.
wireless
TM
7. Press the play button on
your iPod or the IR remote
TM

Removing the Integrated Power Supply From the Wireless Speaker
To use your Wireless Speaker on a desktop/bookshelf, remove the power supply from the wireless speaker by
following these steps:
1. Press down on the top of the power supply. The swivel plate beneath the power supply will make a “click”
sound and rotate outward.
2. Rotate adapter forward and remove the power supply from the enclosure.
Reattaching the Power Supply to the Wireless Speaker
1. Coil the cord around your hand.
2. Place the coil of cord in the bottom of the cavity.
3. Press lower edge of swivel plate to rotate forward
4. Insert the power supply into the cavity leaning forward.
5. Press down on the top of the power supply.
6. Rotate the power supply back to a vertical position (making sure to lock the tab at the top of the speaker
cabinet with the groove at the top of the power supply.)
CLICK!
CLICK!