Erbauer ERB20GM User manual

800W MIXER
ERB20GM
WARRAN
TY
YEARS

800W MIXER
GUARANTEE
This product carries a Screwfix Direct Ltd guarantee of 24 months. If your
product develops a fault within this period, you should, in the first instance contact
Screwfix Direct Ltd on Freephone 0500 41 41 41. If the fault occurs within the first 24
months, you may return the goods for a full refund or we will repair or replace the goods
if you prefer. When repair is not practical or identical goods are not available, alternative
goods of similar specification and quality will usually be provided but, failing this, you
will be offered a partial or full refund depending on the time period since purchase.
This guarantee specifically excludes losses caused due to:
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items (such as batteries)
- Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods
- Repairs attempted by anyone, unless authorised by Screwfix Direct Ltd.
This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.
For further technical advice and spare parts.please contact the customer helpline
number on 0845 607 6380.
Congratulations on your purchase of a quality power tool from Screwfix
Direct Ltd. This product should give you reliable service but for your peace
of mind this power tool does carry a 24-month guarantee, the terms
of which are detailed below.
If this product develops a fault within the guarantee period contact Screwfix
Direct Ltd on Freephone 0500 41 41 41.
Please retain this handbook in case you need to refer to safety, care or
guarantee information in the future.

SAFETY INSTRUCTIONS
WARNING! Read all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE THESE INSTRUCTIONS
1. Work area
a. Keep work area clean and well lit.Cluttered and dark areas invite
accidents.
b. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.Water entering a
power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric
shock.
e. When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b. Use safety equipment. Always wear eye protection. Safety equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure the switch is in the off-position
before plugging in. Carrying power tools with your finger on the switch or
plugging in power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This

800W MIXER
enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use
of these devices can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the rate
for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and must
be repaired.
c. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tools operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc., in accordance with
these instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from intended
could result in a hazardous situation.
5. Service
a. Have your power tool serviced by a qualified repair person using only
Safety Instructions identical replacement parts.This will ensure that the
safety of the power tool is maintained.
HEALTH ADVICE
WARNING! When drilling, sanding, sawing or grinding, dust particles will be
produced. In some instances, depending on the materials you are working with,
this dust can be particularly harmful to you (e.g. lead from old gloss paint).
You are advised to consider the risks associated with the materials you are working
with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.

ADDITIONAL SAFETY RULES FOR YOUR MIXER
1.Always wear ear protectors with drill. Exposure to noise can cause hearing loss.
2.Always use the auxiliary handles supplied with the tool. Loss of control can cause
personal injury.
3.Do not start the drill or mixing with the chuck key in chuck.
4.Make sure the power switch is not “on” before you plug in. Always switch off before
you put your mixer down.
5.Hold your mixer firmly in both hands.
6.Do not use the machine in an atmosphere where there is a risk of explosion. Do
not mix any solvents or substances that contain solvents with a flash point of below
21°C.
7.Do not place any cables around any parts of your body.
8.Only start and stop the machine in the mixing vessel. Ensure that the mixing vessel
is placed on a firm secure base.
9.Do not reach into the mixing vessel with your hands or any other objects during the
mixing process.
10.We recommend that you wear gloves and safety goggles when working with the
mixing machine.
11.You must wear close-fitting clothing.
12. Always expect reaction torque.
13.When drill use clamps or a vice to hold workpiece, if possible.
Double insulation:
The tool is double insulated. This means that all the external metal parts are electrically
insulated from the mains power supply. This is done by placing insulation barriers
between the electrical and mechanical components making it unnecessary for the tool
to be earthed.
Important note
Be sure the supply is the same as the voltage given on the rating plate. The tool is
fitted with a two-core cable and plug.
Remove the mains plug from socket before carrying out any adjustment or servicing.
SYMBOLS
Read the manual Warning Wear gloves
Wear dust mask,eye & ear protection
Conforms to relevant safety standards

800W MIXER
1. CHUCK
2. ADAPTER OF CHUCK
3. OPENING OF SKEW WEDGE
4. AUXILIARY HANDLE
5. SWITCH LOCK ON BUTTON
6. ON/OFF SWITCH
7. FORWARD/REVERSE SELECTOR SWITCH
8. SKEW WEDGE
9. CHUCK KEY

TECHNICAL DATA
Voltage: 230V~50Hz
Power input: 800W
No load speed: 0-300min-1
Chuck capacity: Ø3-16mm
Drilling capacity:
Steel Ø23mm
Wood Ø50mm
Double insulation:
Weight: 4.20kg
ACCESSORIES
Auxiliary handle 1pc
Chuck key 1pc
NOISE AND VIBRATION DATA
Sound pressure level: 83dB (A)
Sound power level: 97dB (A)
Vibration level: 1.0m/s2

800W MIXER
OPERATION INSTRUCTIONS
Warning: Before using your mixer be sure
to read the instruction manual carefully.
1. Installing the auxiliary handle (See fig2)
For your personal safety we recommend using
the auxiliary handle at all times.
To fit the handle, rotate the handle clockwise until
it is secured fully.
Note: This handle should be used at all times to
maintain complete control of the tool.
2. Installing the chuck (See fig3)
Warning: Before installing tool, remove
mains plug from mains supply.
Important: Make sure the tapered hole inside the
output spindle (1) and the adapter of chuck (3)
are clean and have some grease to prevent from
rust.
Push the adapter of chuck into the cone of the
chuck(4) forcefully. Then insert the adapter of
chuck (3) into the output spindle (1), rotate the
adapter of chuck until the drive key (2) engages
the mating slot inside the output spindle. Push
the adapter of chuck forcefully.
3. Inserting a tool into chuck (See fig4)
Warning: Before installing tool, remove
mains plug from mains supply.
Place the key into the chuck, turn the key anti-
clockwise to undo/loosen the chuck, inset mixing
tool/drill bit and firmly tighten the chuck by turning
the key clockwise then remove the key.
4. Operating the On/Off switch (see fig5)
Press the on/off switch in for operation, release
switch to stop.
If you wish to use the mixer continuously the
switch lock button can be pushed in after the
on/off switch has been depressed. To release the
lock button simply depress on/off switch fully,
the button will automatically release. The speed
of the mixer varies with the amount of pressure
applied to the on/off switch, i.e. more pressure for
higher speed.
5. Changing rotational direction (see fig6)
To change the rotational direction, push the
forward/reverse selector switch to the “R” position Fig 5
Fig 2
Fig 3
Fig 4

indicated on your mixer. The rotation will now
be forward rotation. Push the forward/reverse
selector switch to “L” position indicated on your
mixer. The rotation will be reverse rotation.
Note:
Never change the forward/reverse selector
switch whilst the mixer in operation or the
on/off switch is locked as this will damage
the mixer.
6. Removing the chuck (see fig7)
The adapter of chuck and chuck can be removed
with a skew wedge.
1.Turn the chuck until you can see the drive key
through the side opening.
2. Insert the skew wedge into the side opening.
3. Tap the skew wedge with a hammer until the
adapter of chuck and chuck is released.
4 To remove the chuck from adapter of chuck, you
can insert a bar into the hole of chuck. Then tap
the bar with a hammer until the adapter of chuck
is released.
Working hints for your mixer
1. Mixing
When you insert the mixer into the product
is mixed or take it out of the product is mixed,
reduce its speed. Once the mixer is fully immersed
in the product, increase the speed to maximum
to ensure that the motor is cooled adequately.
During the mixing process guide the machine
through the mixing vessel. Continue to mix the
product until it is fully homogenized. When you
have finished the mixing work, clean the mixer.
2. Pilot holes
When drilling a large hole in tough material (i.e.
steel), we recommend drilling a small pilot hole
first before using a large drill.
3. Cool the motor
If your power tool becomes too hot, set the speed
to maximum and run no load for 2-3 minutes to
cool the motor.
Fig 6
Fig 7
Reverse
rotation
(L)
Forward
rotation
(R)
Skew wedge

800W MIXER
MAINTENANCE
1 Your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool.
2 Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth.
3 Always store your power tool in a dry place.
4 Keep the motor ventilation slots clean.
5 If you see some sparks flashing in the ventilation
slots, this is normal and will not damage your
power tool.
6 If the supply cord is damaged, it must be
replaced by a special cord or assembly available
from the manufacturer or its service agent.
TROUBLESHOOTING
1 If your mixer will not operate, check the power
at the mains plug.
2 If the drill is not cutting properly, check the drill
bit for sharpness, replace drill bit if worn. Check
that the drill is set to forward rotation for normal
use.
3 If a fault can not be rectified return the mixer to
an authorized dealer for repair.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be dis-
posed of with household waste. Please re-
cycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.

PLUG REPLACEMENT
The fuse in the main plug of your power tool
should always be replaced with one of identical
rating.
Check the voltage given on your power tool
matches the supply voltage.
The power tool is supplied with a fitted plug,
however if you should need to fit a new plug
follows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in
accordance with the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured blue must be connected
to the terminal that is marked with the letter N.
The wire that is coloured brown must be
connected to the terminal that is marked with the
letter L.
A 13AMP (BS1363 or BS1363/A) plug must be
used and a 13 AMP fuse must be fitted.
13 AMP
FUSE
BROWN
L (LIVE)
BLUE
N (NEUTRAL)
OUTER
SLEEVE CABLE GRIP

800W MIXER
Declaration of Conformity
We, Importer
Screwfix Direct Ltd
Mead Avenue
Houndstone Business Park
Yeovil
BA 22 8RT
Declare that the product
800W MIXER
ERB20GM
Complies with the essential health and safety requirements of the following directives:
89/336/EEC, 93/68/EEC – EMC Directive.
73/23/EEC, 93/68/EEC – Low Voltage Directive
98/37/EC – Machinery Directive.
Standards and technical specifications referred to:
EN55014-1:2000+A1+A2
EN55014-2:1997+A1
EN61000-3-2:2000
EN61000-3-3:1995+A1
EN60745-2-1:2003
EN60745-1:2003+A1
2005
Authorised Signatory
Date: 15/12/05
Signature:
Name: Peter Harries
Screwfix Direct Ltd
Quality Manager

800W MIXER