Galanz GLSM07WER08 User manual

Thank you for purchasing a Galanz product. Please read this manual carefully for correct usage and safety,
and keep for future reference. For service, support and warranty information, call 1-800-562-0738.
@2022 Galanz Americas Limited Company
@2022 Galanz Americas Limited Company
MODEL: GLSM07WER08
RETRO STANDMIXER USER MANUAL

CONTENTS
CONTENTS
Important Safeguards
What’s In The Box
Before First Use
Using Your Retro Stand Mixer
Mixing Tips
Care & Maintenance
Troubleshooting
Product Warranty
Warranty Registration
1
3
4
5
6
7
8
9
10

1 2
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING
YOUR GALANZ PROFESSIONAL RETRO STAND MIXER


HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
Power Consumption
Watts
Capacity
120V, 60Hz
800 W
7 Qt.
NOTICE
This appliance has a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to modify this
safety feature.
The appliance is designed exclusively for private use . This appliance
is not fit for commercial use. Do not use it outdoors (except if it is
designed to be used outdoors). Keep it away from sources of heat,
direct sunlight, humidity (never dip it into any liquid) and sharp
edges. Do not use the appliance with wet hands. If the appliance is
humid or wet, unplug it immediately.
Do not operate the machine without supervision. If you should leave
it unattended, always switch the machine off or remove the plug
from the socket (pull the plug itself, not the lead).
Check the appliance and the cable for damages on a regular basis.
Do not use the appliance if it is damaged. Do not try to repair the
appliance on your own. Always contact an authorized technician. If
the supply cord is damaged, it must be replaced by the manufactur-
er, its service agent or similarly qualified persons in order to avoid a
hazard.
Use only original spare parts. Turn off and unplug the appliance before changing accessories or
approaching parts that move in use. Do not use appliance for other
than intended purpose.
CAUTION: In order to avoid a hazard due to inadvertent resetting of
the thermal cut-out, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility.
Only operate this machine under supervision.
Do not interfere with any safety switches.
Do not insert anything into the rotating hooks while the machine is
working.
Place the machine on a smooth, flat and stable working surface.
Do not insert the plug of the machine into the power socket without
having installed all the necessary accessories.
CAUTION: Ensure that the blender is switched off before removing it
from the stand.
Pay careful attention to the following “Special Safety Instructions”.
In order to ensure your children‘s safety, please keep all packaging
(plastic bags, boxes, polystyrene etc.) out of their reach.
When using the blender and chopper, the appliance shall not be use
by children. Keep the appliance and its cord out of reach of children.
When using the beater and whisk, the appliance can be used by
children aged from 8 years and above if they have been given super-
vision or instruction concerning use of the appliance in a safe way
and if they understand the hazards involved. Cleaning and user
maintenance shall not be made by children. Keep the appliance and
its cord out of reach of children aged less than 8 years
This device is not a toy. Children shall not play with the appliance.
Appliances can be used by persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards involved.
Always unplug the appliance, before assembling, disassembling or
cleaning.
Caution! Do not allow small children to play with the packaging as
there is a danger of suffocation!
When cleaning or putting it away, make sure that the appliance is
turned off, and unplugged (pull on the plug, not the cable) and
remove the attached accessories.
Special Safety Instructions for this Machine

3 4
WHAT’S IN THE BOX BEFORE FIRST USE
WHAT’S IN THE BOX
BEFORE FIRST USE
1. IMPORTANT: Review all warnings in IMPORTANT SAFEGUARDS
before first use.
2. Carefully unpack your Retro Stand Mixer and remove all packaging
materials. Check the contents to ensure all attachments have been
received in good condition.
3.
4. The carton should contain –
1 x Motor Body
1 x Beater
1 x Dough Hook
1 x Whisk
1 x Bowl
1 x User Manual
1 x Quick Start Guide
1.
1
2.
2
3.
4
4.
65.
6.
7.
8.
9.
10.
11.
Attachment Hub
Attachment Knob
Beater Shaft
Motor Head
Tilt Head Handle
Speed Control Knob
7 Qt. Stainless Steel Bowl
Splash Guard
Stainless Steel Whisk
Beater
Dough Hook
1
Wipe the motor body and wash the accessories in the warm soapy
water, or dishwasher.
5
3
7
8 9 10 11

5 6
USING YOUR STAND MIXER USING YOUR STAND MIXER
USING YOUR STAND MIXER USING YOUR STAND MIXER


Attaching/Removing the Accessories Adjusting the Levels and Using the Accessories
In order to lift the arm, Tilt Head Handle (2). The arm will now move
upwards.（PG1）Mount the required utensil (dough hook, beater, or whisk）by insert-
ing the top into the output shaft, and turn anti-clockwise until it locks
into place. (PG4&PG5)
Switch the machine using the speed control knob to a speed
between 1 and 6 (corresponding to the mixture).
For pulse operation (kneading at short intervals), turn the switch to
the “PULSE” position. The switch has to be held in this position
according to the desired interval length. When the switch is released
it returns automatically to the “0” position.
After kneading/stirring, turn the speed control knob (3) back to the
“0” position as soon as the mixture has formed a ball. Then remove
the mains plug.
Lift up the Tilt Head Handle and the arm will be raised.
The mixture can now be released with the help of a spatula and
removed from the mixing bowl.
The mixing bowl can now be removed.
Clean the parts as described under “Cleaning” .
Now fill in your ingredients.
Do not overfill the machine - the maximum quantity of ingredients is
2.8 Liters.
Lower the arm using the Tilt Head Handle (2). (PG6)
Insert the plug into a properly installed power socket.
Place the splash guard into its body. (PG2)
Place the mixing bowl onto the stand (Step①) and turn the bowl
clockwise until it locks into place (Step②). (PG3)
UU s s e e PP i i cc t t uu r r ee LL ee vv ee l l ss TT i i mm ee ( ( MM i i nn ) ) MM aa xx i i mm uu mm oo pp ee r r aa t t i i nn gg ss t t ee pp ss
Dough hook 1 - 3 33 - - 55 1000g flour and
538g water
Beater 2 - 4 33 - - 11 00 660g flour and
840g water
Whisk 6 33 - - 11 00 3 egg whites
(Minimum)
1 speed run for 30s,
the 2 speed run for
30s, and then the 3
speed run for 2 min to
4 min to form a cluster.
After continuous
operation of 10 min,
please stop using.
2 speed run for 20s, 4
speed run for no more
that 2 min 40s.
Allow 5 or 6 speed to
run for more than 3
min.
MIXING TIPS

7 8
CARE & MAINTENANCE
TROUBLESHOOTING
The machine doesn't work
Check if the plug is in good contact with the socket.
Check if the rise button spring back in place.
Check if the machine works continuously more than 6 minutes,
and wait until the motor cools down.
Noise in the mixing bowl when working (the
accessory scraped the bowl)
Check if the mixing bowl is properly installed.
Check if the accessory is installed properly on the machine.
The pot cover doesn’t fit the mixing bowl
properly
Check if the splash guard placed on the machine properly.
Check if the mixing bowl is installed properly on the machine and
locked correctly.
The machine doesn’t work on certain
speeds
Check if the mark on the speed knob corresponds to the speed
setting on the housing.
Rotate the speed knob to 0, and re-check if the machine works.
Movements when the machine working ·Check if the anti-slip feet fell off.
·Check if the machine is placed on a smooth and flat tabletop.
The rise button won't spring back in place
after installing the mixing bowl and pot cover
·Check if the splash guard is placed on the machine properly.
·Check if the mixing bowl is properly installed.
CARE & MAINTENANCE TROUBLESHOOTING
Dispose of the device over a registered waste disposal firm or
through your communal waste disposal facility.
Observe the currently valid regulations. In case of doubt, consult
your waste disposal facility.
Do not dispose of the device in normal domestic waste.
Disposal



Before cleaning remove the plug from the socket.
Never immerse the motor in water.
Do not use any sharp or abrasive detergents.
Only a damp rinsing cloth should be used to clean the outside of the
housing.
Components that have come into contact with food can be cleaned
in soapy water.
Allow the parts to dry thoroughly before reassembling the device.
Motor Housing
Mixing Bowl, Mixing Equipment
The components are not suitable for cleaning in a dishwasher. If
exposed to heat or caustic cleaners they might become misshapen
or discolored.
CAUTION:
Cleaning
1
NO. Troubles Solution
2
3
4
5
6

9 10
PRODUCT WARRANTY WARRANTY REGISTRATION
WARRANTY REGISTRATION
PRODUCT WARRANTY
Please mail this warranty card to address below within 30 days of purchase. Or you can
register your product on line by going to www.galanz.com\us.
Galanz 'SKXOIGY)NGRRKTMKX8UGJ9[OZK8OJMK࠭KRJ6GXQ40
PLEASE PRINT CLEARLY.
Name__________________________________________________________
Address________________________________________________________
City_______________________State___________Postal Code___________
Phone___________________Email___________________________________
Model Number_____________________Serial Number__________________
Purchase Location________________________________________________
You must attach a copy of your purchase receipt to validate your registration.
above exclusions will be denied. All liability is limited to the
purchase price and does not include any:
Retail offered extended warranties
Tax
Other charges(including postage to send required materials)
Incidental and/or consequential damages associated with the
product in question.
Every implied warranty, including any statutory warranty of
merchantability or fitness for a particular purpose is disclaimed
except to the extent prohibited by law, in which case such warranty
is limited to the duration of this written warranty. This warranty
gives you specific legal rights. You may have other legal rights that
vary depending on where you live. Some states do not allow
limitations on implied warranties or special, incidental, or conse-
quential damaged, so the above limitations may not apply to you.
If you have a claim under this warranty, please call our Customer
Service number: 1-800-562-0738.
For faster service, please have the model number, serial number,
and receipt ready for the operator to assist you.

This warranty applies to products sold by Galanz Americas in the
U.S. This warranty is in lieu of any other warranty and expressly
applies to the individual product only.
Galanz product is warrantied for one year following purchase for
defects in material and workmanship. Please save your receipt
GYVXUULULV[XINGYKOYXKW[OXKJZUSGQKG]GXXGTZ_
claim. During this warranty period, we will provide the replacement
cost of this product, a replacement or the equivalent,or repair per
our discretion.
The warranty cannot be transferred through resale, including the
resale through a 3rd party unauthorized retailer and is only
bestowed upon the original consumer purchaser upon purchase
from an authorized retailer.
This warranty does not cover and excludes damage or
defects caused by:
Consumer misuse
Abuse
Neglect including the failure to clean and/or provide adequate
regular maintenance as outlined in the user manual
Commercial use
Subjecting the product to any voltage outside the specified
range
Loss of parts
The affixing of any attachments not provided with the product
Accident, or
Use in a manner not intended and outlined in the user manual.
Any subsequent damages caused by the above listed exclusions
will not be covered and any claims determined to meet the