Erbauer ERB389JSW User manual
710W JIGSAW
ERB389JSW
Original Instructions
(Version 2.0)
710W JIGSAW
GUARANTEE
This product carries a 2 year guarantee. If your product develops a fault within this
- Fair wear and tear
- Misuse or abuse
- Loss of use of the goods
This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.
For further technical advice, spare parts or repair service (outside of guarantee) please con-
Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This
product should give you reliable service but for your peace of mind this
power tool does carry a 2 year guarantee, the terms of which are detailed below.
If this product develops a fault within the guarantee period contact your retailer.
Please retain this handbook in case you need to refer to safety, care or guarantee
information in the future.
GENERAL POWER TOOL SAFETY WARNINGS
Warning! Read all safety warnings and all instructions.
Save all warnings and instructions for future reference.
(corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b. Do not operate power tools in explosive atmospheres,
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a.Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools.
will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use of
710W JIGSAW
an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power tool
or medication.
b. Use personal protective equipment. Always wear eye
protection.
safety shoes, hard hat, or hearing protection used for appropriate
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying power
have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the
power tool on.
A wrench or a key left attached to a rotating part of the power tool
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool in
f. Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving parts.
parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for
safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the switch
c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are
f. Keep cutting tools sharp and clean.
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
result in a hazardous situation.
5. Service
person using only identical replacement parts. This will
b) If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in order to
avoid a safety hazard.
710W JIGSAW
ADDITIONAL SAFETY POINTS FOR YOUR JIGSAW
1. Always wear a dust mask.
2. Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
Use clamps or another practical way to secure and support
the workpiece to a stable platform. Holding the work by hand
control.
Always wear safety glasses or eye shields when using the
jig saw. Everyday eyeglasses have only impact-resistant
lenses; they are NOT safety glasses. Following this rule will
Always wear hearing protection during extended periods
of operation. Following this rule will reduce the risk of serious
Keep your hands away from cutting area. Do not reach under
Do not use dull or damaged blades. Bent blades can break
easily, or cause kickback.
overheating.
electrical condition.
the rating plate.
12. Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
cables and pipes.
could be hot.
breakage.
19. Never stop the cutting blade by applying side pressure to the
blade.
Warning:
Some dust particles created by power sanding, sawing, grinding, drilling and
other construction jobs contain chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• Work in a well-ventilated area.
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to help reduce
daily basis and the choice of tool.
Further Advice can be found at www.hse.gov.uk
Cutting wood h
h
used with the current guidance on vibration.
710W JIGSAW
Warning:
.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles.
And the tool is being used as intended by its design and these instructions.
While working with this power tool, hand/arm vibrations occur. Adopt the correct
working practices in order to reduce the exposure to vibration.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
Warning:
working period on this tool.
ALWAYS use sharp chisels, drills and blades
.
Maintain this tool in accordance with these instructions and keep well lubricated
(where appropriate)
.
.
Health Surveillance
any vibration related diseases at an early stage, prevent disease progression and help
Double insulation
earthed.
Important note
with a two-core cable and plug.
.
SYMBOLS
Warning
Double insulation
Wear ear protection Wear eye protection
Waste electrical products should not be disposed of with household waste.
or retailer for recycling advice.
710W JIGSAW
2
7
11
4
9
3
5
6
10
12
14
13
1
8
1. ON/OFF SWITCH
2. SWITCH LOCK-ON BUTTON
3. HAND GRIP AREAS
4. VARIABLE SPEED CONTROL
5. HEX KEY
6. DUST TUBE
7. BASE PLATE
8. ANGLE PLATE
9. PENDULUM ACTION CONTROL
10. ROLLER GUIDE
11. SAW BLADE
12. FINGER PROTECTION
13. TOOL-FREE BLADE HOLDER
14. WORK LIGHT
15. PARALLEL GUIDE (See Fig. 6-1, 6-2)
710W JIGSAW
TECHNICAL DATA
Voltage
Power input
No load speed
Stroke length
Bevel capacity
Wood
Steel
Protection class
Machine weight
NOISE DATA
pAPA
wAWA
ACCESSORIES
Parallel guide 1pc
Hex key 1pc
Dust tube 1pc
Wood cutting blade 2pcs
Aluminum cutting blade 2pcs
Metal cutting blade 2pcs
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE:
the workpiece. It is suitable for straight and curved
1.ON/OFF SWITCH
Depress to start and release to stop your tool.
2. SWITCH LOCK-ON BUTTON
(See Fig.1)
button second. Your switch is now locked on for
3. VARIABLE SPEED CONTROL
the speed (See Fig.2)
used (also possible during no load operation). See
Chart 1 for general guidance on speed selection.
Chart 1
Material Speed setting
Wood
Metal
PVC
4. HAND GRIP AREAS
5. BLADE FITTING(See Fig.3, 4, 5)
Fig 1
Fig 2
Fig 4
1 2
4
Fig 3
13
710W JIGSAW
anti-clockwise (Jigsaw upside down) and hold in
into the blade holder slot with blade teeth facing
forward and release the ring, which will self rotate
blade into the blade holder again to ensure it is
locked in position. Ensure the edge of the blade
is located in the groove of the blade guide (See
rotate the blade holder ring anti-clockwise then lift
Warning: Blade teeth are very sharp. For
best cutting results ensure you use a blade
6. MOUNTING PARALLEL GUIDE
(See Fig.6-1, 6-2.)
Tighten the locking knob (b) to achieve the
required cutting distance. The parallel guide can
7. ROLLER GUIDE
function will not work correctly and the blade will
not be supported during cutting.
8. PENDULUM ACTION CONTROL (See Fig.7)
stroke only.
Chart 2
0
Tight curves.
Fig 5
10
Fig 6-1
Fig 6-2
Fig 7
a
b
15
9
I
chipboard)
II
III Fast cuts (e.g. softwood).
Cutting in the
9. BASE PLATE
10. BASE PLATE ANGLE ADJUSTMENT
base plate (See Fig.8). For preset angles rotate so
the lines of the angle on the base plate and angle
(See Fig.9)
to your desired angle (use a protractor scale).
Following one of the above procedures, hold the
for accurate work to set the angle with a protractor
11. DUST TUBE (See Fig.10)
corresponding opening on the housing as shown in
12. PROTECTION FINGER WIRE
holder. Whilst working, it will help prevent
13. DUST BLOWER AIR HOLE
Fig 8
Fig 9
Fig 10
8
8
7
6
710W JIGSAW
15. WORK LIGHT
work light.
Caution: Do not look into the strong light or
see the source of light directly.
WORKING HINTS FOR YOUR JIG SAW
Avoid prolonged usage at very low speeds.
GENERAL
start cutting, then increase to correct speed.
quality of the cut. The blade cuts on the upward
CUTTING LAMINATES
sides and cut through the waste wood during
cutting.
CIRCLE CUTTING
circles or angles
PLUNGE SAWING
boards, etc.!
Use only short saw blades.
Place the front edge of the base plate on the
against the workpiece and plunge the saw blade
slowly into the workpiece.
rests on the work piece, continue to saw along the
cutting line. (See Fig.11, 12)
METAL CUTTING
both sides of the sheet to reduce vibration or
line.
MAINTENANCE
Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
Your power tool requires no additional lubrication
parts in your power tool. Never use water or
clean with a dry cloth. Always store your power
slots clean. Keep all working controls free of
Fig 12
Fig 11
710W JIGSAW
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
Local Authority or retailer for recycling advice.For
PLUG REPLACEMENT
(UK & IRELAND ONLY)
the instructions below.
IMPORTANT
BLUE =NEUTRAL
Brown = Live
proceed as follows. The wire which is colored blue
Warning:
Never connect live or neutral wires to the
13AMP BS1363/A plug and the correct rated
fuse.
Note:
engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
Brown L(live)
Cable grip
DECLARATION OF CONFORMITY
Erbauer (UK) Ltd BA22 8RT
Declare that the product
710W JIGSAW
ERB389JSW
EC Machinery Directive 2006/42/EC
EC Low Voltage Directive 2006/95/EC
2004/108/EC
2011/65/EU
2012/19/EU
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60745-1
EN 60745-2-11
Other manuals for ERB389JSW
1
Table of contents
Other Erbauer Power Tools manuals
Erbauer
Erbauer EID18-Li User manual
Erbauer
Erbauer EWC1500 User manual
Erbauer
Erbauer ERB150D User manual
Erbauer
Erbauer ERB900 User manual
Erbauer
Erbauer ERB383WCH User manual
Erbauer
Erbauer ERB125Y User manual
Erbauer
Erbauer EJS750 User manual
Erbauer
Erbauer ERB474HT User manual
Erbauer
Erbauer ERI065JSW User manual
Erbauer
Erbauer ERI068TOR Operator's manual
Erbauer
Erbauer EMT18-Li-QC User manual
Erbauer
Erbauer EHTIW18-Li User manual
Erbauer
Erbauer ERB389JSW User manual
Erbauer
Erbauer ECD12-Li-2 User manual
Erbauer
Erbauer ERB383WCH User manual
Erbauer
Erbauer EBR1750 User manual
Erbauer
Erbauer ERB096HTG User manual
Erbauer
Erbauer ER2100 User manual
Erbauer
Erbauer ERB567DRH User manual
Erbauer
Erbauer ERN647ATL-I User manual
