Ergo Tab EBCM7 User manual

Thank you for choosing this product! We strive to provide you with the
best quality products and services in the industry. Should you have any
issues, please don't hesitate to contact at [email protected] (US/CA)
V2.0
Dual Monitor Desk Mount
Instruction Manual
Model: EBCM7

IMPORTANT SAFETY INFORMATION
•Check package contents against Supplied Parts and Hardware Lists to assure
that all components were received undamaged. Do not use damaged or defective
parts.lf you require replacement parts, contact customer service at
[email protected]
•Not all parts and hardware included will be used.
•Carefully read all instructions before attempting installation.If you do not
understand the instructions or have any concerns or questions, please contact
customer service at [email protected]
•This product may contain moving parts. Use with caution.
•Do not use this product for any purpose or in any configuration not explicitly
specified in this instruction. We hereby disclaim any liability for injury or damage
arising from incorrect assembly, incorrect mounting, or incorrect use of this
product.

Supplied Parts and Hardware
STEP 1 Install the Base
1
F2
H
F
G
F1
Tools Needed (Not Included)
Phillips Screwdriver
A:
C Clamp Mount Option
M10
D(x1)
M10
E(x1)
M4X12MM
A(x8)
M4X16MM
B(x8)
M6X12MM
F(x1)
M8X10MM
G(x2)
M6X8MM
H(x2)
Large Allen Key
F1(x1)
Medium Allen Key
F2(x1)
a(x1) b(x1) (x1)
Small Allen Key
F3(x1)
F4(x2) c
L5mm
C(x8)

STEP 1A Install the Base(C Clamp Mount Option)
2
b
D
E
b
a
b
Desk Thickness
2 11/64 in(55mm) - 3 5/32 in.(80mm)
Desk Thickness
1 3/16 in.(30mm) - 2 11/64 in(55mm)
Desk Thickness
3/8 in.(10mm) - 1 3/16 in.(30mm)
B:
Grommet Mount Option
tighten
Table top

A
STEP 2 Assemble Arm
STEP 3 Attach VESA Plates to the Back of Monitors
3
c
F1
B
C
Flat back monitor Round back monitor

STEP 4 Hang the Monitor to the Mount
4
Individual VESA plate height adjustment
helps monitors to be perfectly aligned.
Cable management
Height Adjustment
Tilt Adjustment
2x Cable tie
F1
F3
F3
F3

All of us do appreciate your product purchase. We hope that you are as happy with
your product as we designing and manufacturing it for you. We strive to provide
you with the best quality products and services in the industry. If you have any
questions please don't hesitate to contact us at [email protected] (US/CA)
Thank you again for
choosing this product!