+31 (0) 104 702 611
info@ergoline-ergonomics.com
ErgoLine Solo X Compact Keyboard
The following is included with the ErgoLine Solo X Compact Keyboard:
-ErgoLine Solo X Compact Keyboard
-USB receiver
-Magnetic strip
-USB cable
-Storage bag
Connecting the keyboard
The ErgoLine Solo X keyboard is very easy to set up. You plug the USB receiver (which is included in
the magnetic stripe) via a free USB port in the laptop / PC and you can get started right away. Do not
forget to slide the on / off button on the right side to the “on” side.
The keyboard is supplied charged, if the keyboard becomes empty, you can charge it by means of the
USB cable. You can easily plug this on the right side of the keyboard (micro USB) and a free USB port
of the laptop / computer. The keyboard only charges via the laptop when it is also connected to the
power supply.
The supplied magnetic strip gives the option to raise the back of the keyboard to an angle of 5
degrees if necessary. You can place this strip with the flat side on the back of the keyboard and the
magnets will stick automatically.
Furthermore, the keyboard has LED indicators, which indicate the status of the energy level.
The top LED indicator shows if the caps lock is on or not,
once this mark, the caps lock is on.
The middle LED indicator indicates that the keyboard
is looking for a connection, as long as it keeps flashing,
there isn't one yet link.
The bottom LED indicator indicates the keyboard is charging, as long as it is red, the keyboard is not
fully charged. Once it has turned to blue, the keyboard is fully charged.