ERGOMART POS18-3005 User manual

1 2 3
45
Insert inner pipe into base. (A)
Use Knob (C) to allow height adjust-
ment of Unit.
H.
Attach (D or E) using the phillips flat
head screws (F).
Carefully place monitor face down on
flat surface. Attach to VESA plate
using Phillips pan head screws (G).
Increase or decrease resistance to tilt
by adjusting set screw at the point of
articulation using wrench.
A.
*
*
*
E. E.
E. E.
D.
F.
F.
F.
F.
C.
A.
POS18-3005
Installation Instructions
www.ergomart.com | 888 420 3200
Ergonomic solutions for office and light industrial work environments
©2015 Ergomart. All rights reserved.
The installer must determine the
appropriate fastener for your appli-
cation. If uncertain about mounting
procedures contact Ergomart for
technical assistance.
*Hardware NOT included.
Please call Ergomart at
888 420 3200
with your questions
www.ergomart.com

A. LS18-3005 Base 1
B. LS18-3005 Inner Pipe 1
C. Knob 1
D. 75mm VESA Adapter Plate 1
7VESA75
E. 10-32 x 3/8" (9.525mm) Phillips Flat Head Screw 4
702281
F. M4-12 Phillips Pan Head Screw 4
702096
G. 7/32" (2.388mm) Allen Wrench 1
H. 3/32" (2.388mm) Allen Wrench 1
700146
POS18-3005
Parts List
www.ergomart.com | 888 420 3200
Ergonomic solutions for office and light industrial work environments
©2015 Ergomart. All rights reserved.
ITEM DESCRIPTION / PART NO. QUANTITY