ERHARD FUNTEC 56848 User manual

User Manual
1
Please read and file this user manual carefully. Number: 33318E
Reproduction and distribution to unauthorized parties Date: Nov.2006
forbidden. Technical details are subject to change!
Assembly Schedule
Beachvolleyball – Game Posts
PRO BEACH
Item No. 56848, 56850, 56860
Remark: Article without net, post pad, adhesive achor
and additional mountings.
Design .oNmetIgnikraM
Game post PRO BEACH
with Special
-Groundsockets for
bolding
56850
1A
Adhesive achor (with anchor rod M10) 56852
Game post PRO BEACH
with Switch - Special - Groundsocket
linked to the floor panel for bolding
56848
BEACH – floor panelfor bolding 50788
2A
Adhesive achor (with anchor rod M10) 56852
Game post PRO BEACH
with CITY – BEACH – Groundsocket
linked to the wooden square timber
56860
1B
Square-Timber-Set (4-parts) 50774
Game post PRO BEACH
with Switch - Special - Groundsocket
linked to the floor panel with T-base and
wooden square-timber
56848
BEACH – floor panel with T-base for
Switch - System 50789
2B
Square timber-Set (4-parts) 50774
Remark:
Test symbol
only for
Art.Nr.:
56860.

User Manual
2
Content
1. Product Description.................................................… Page 2
2. Intended Use........................………………………….. Page 2
3. Warranty...............................................................….. Page 3
4. Safety Instructions................................................….. Page 3
5. Components Lists andImage.................................…. Page 3-4
6. Assembly and Maintenance
6.1. Groundsocket (Adhesive achor)...................…. Page 4-6
6.2. Game post...................................................….. Page 6
6.3. Bachvolleyball – competition net....................... Page 7
7. Storage...................................................................…. Page 8
8. Cleaning...................................................................... Page 8
9. Maintenance................................................................Page 8
10. Spare parts………………….........................................Page 8
11. Accessories................................................................. Page 9
12.Technical Data.......................................................…. Page 9
13. Contact Details......................................................….. Page 9
Explanation:
Remark: Additional information on the product.
Note : Imminent danger for the product.
Warning:Imminent danger for a person.
1. Product Description
Beachvolleyball – game post PRO BEACH, powder-coted in yellow and
alumina-specialprofile 91x91 mm.
One game post with integrated pully block nettensioning device,
the other with counter slide.
Net heights and posts at fullytensioned net (100 kg).
Beachvolleyball – game post PRO BEACH with CITY – BEACH - groundsocket
(Art.Nr.: 56860) has a GS- and DVV1-test symbol.
2. Intended Use
Beachvolleyball – game post PRO BEACH can only be constructed and
used on level ground.
It can only be used in ball games.
In case of improper use or utilization by unauthorized persons, the liability expires
(ie. our warranty is no longer valid).

User Manual
3
3. Warranty
Provided that maintenance is carried out in regular intervals and the product is used
properly, the warranty period is 2 years.
4. Safety Instructions
 Game post PRO BEACH can only be constructed and used on level ground.
 No load can be placed on the net, because it could damage net or post.
 Children should never be without subervision.
5. Components Lists and Image
Components List
Pos. Qty. Description
(1) 1x Game post with pully block tensioning device
(2) 2x Game post with counter tensioning slide
(3) 1x Groundsocket – depending on design -
(4) 8x Adhesive achor (not included in shipment)
(5) 2x Square-Timper-Set (not included in shipment)
(6) 2x BEACH – floor panel - depending on design -
(not included in shipment)
(7) 1x Net (not included in shipment)

User Manual
4
Image
6. Assembly
Remark: Selection of distance between posts depends on the size of the field:
 Size of the field 9x18 m distance between posts 11 m
 Size of the field 8x16 m distance between posts 10 m
6.1. Groundsocket
Version 1A
1. Preparation of foundation 80x80x80 cm with concrete quality B25
including a Steel-mat (Q131) at a depth of 5cm.
2. Positioning and bolding of the groundsocket (3) on foundation.
 4 per adhesive achor (4)
3. Filling the game field with sand,
Height of the sand: min. 25 cm, max. 50 cm
(UK red marker on 40 cm height)
10/11 m
counter slider
tensioning slide
(1)
(2)
(7)
(3)
(3)
10 / 11 m 10 / 11 m
foundation
80x80x80 cm
(4)
(3)

User Manual
5
Version 1B
1. Insert Square-timber-Set (5) in T-base of the
groundsocket (3).
2. Positioning of the groundsocket.
3. Filling the game field with sand,
Height of the sand: min. 25 cm, max. 50 cm
(UK red marker on 40 cm height)
Version 2A
1. Preparation of foundation 80x80x80 cm
only with concrete quality B25 including a
Steel-mat(Q131) at a depth of 5cm
2. Positioning and bolding of the BEACH
– floor panel (6) on foundation.
 4 per adhesive achor (4)
3. Insert groundsocket (3) in BEACH – floor panel (6)
and use bolt for security.
 Insert bolt into drilling.
 Plug spring cotter through drilling in bolt.
4. Filling the game field with sand,
Height of the sand: min. 25 cm, max. 50 cm (UK red marker on 40 cm height)
Note: Distance from centre until centre foundation is 10 / 11 m, however dinstance of the BEACH –
floor panel (6) to each other must be 10,1 / 11,1 m.
Remark: Border strip and cover of the floor panel can be found under point 11. Accessories (page 9).
Version 2B
1. Insert Square timber-set(5) into T-base of
groundsocket (3).
2. Positioning of the groundsocket (3), then insert
Into Beach – floor panel (6), and secure with bolt.
 Insert bolt into drilling.
 Plug spring cotter through drilling in bolt.
3. Filling the game field with sand,
Height of the sand: min. 25 cm, max. 50 cm
(UK red marker on 40 cm height)
Remark: Border strip and cover of the floor can be found under point 11. Accessories (page 9).
Remark: Dispose of the packaging materials according to the regulations prevailing in your country.
(3)
T-base (5)
10 / 11 m
(3)
(3)
(6)
bolt
spring cotter 10,1 / 11,1 m
10 / 11 m 10,1 / 11,1 m
foundation
80x80x80 cm (6)
(6)
(4)
(3)
(3)
drilling
(6)
bolt
T-base spring cotter
10 / 11 m
(3)
drilling
10 / 11 m
(3)

User Manual
6
Adhesive achor (Art.Nr.: 56852)
1. Drill and clean a hole for the bold.
Note: Installation is only permissable in concrete quality B25.
2. Inser the cartridge into the borehole.
3. Fit the UPAT – setting or socket wranch SW12 into the drill
hammer or percussion drill. Attach the anchor rod an charge by
vibration up to the mark, then immediately switch off the machine
and remove the setting tool from the machine.
4. Postitioning of the groundsocket.
5. Tighten the adhesive anchor with hex-nut and disc to 80 Nm.
6.2. Game post
1. Insert game post (1/2) into the opening of
the groundsocket (3).
Note:
 The two rolls on the end of the game post have to be on
top (upper side).
 Consider the position of the posts to the groundsocket.
 Game post is held by rubber cables,
suspended through a 10 cm long range.
2. Infinite height adjustment of game post (1/2)
 Loosening of the fixing screw.
 Positioning of the game post in desired height.
 Thightening of the fixing screw.
flush floor
(1/2) (1/2)
(3)
(1/2)
(3)
fixing screw

User Manual
7
6.3. Net
1. Guide one end of the tensioning cable (A) over the deflection roller and
suspend it in the carbine clip.
2. The other cable end (B) has to be pulled over the opposite deflection
roller and attached to the snap hook fo the button-hole strap.
3. Pull the button-hole strap down (for pre-tensioning the net) and insert it
into the hook.
4. Pull the cordof the adjustment slide.
The lamella brake will clamp down the cord under tension, therby allowing
to create the necessary net tension in several steps. .
5. Use the tensioning cord to fix the button cable (C + D) on the hook.
6. Use the tensioning cord to centre the net.
 Thread the tensioning cord through the eye and pull it completly
Througth the button hole.
 Suspend the other end of the tensionion cord into the
deflection roller/ hook or noose it around the post and knot it.
7. The additional slide can be moved up or down
by the socket wranch.
counter
slide
eye
tensioning cord
(A)
deflection slide
tension
slide
counter
slide
(A) (B)
deflection slide
carabiner
hook
pre-
tansioning
cord
carabiner
hook
tansioning cord
lamella
break
hook
tansioning cord
string
hook (C) (D)
additional slide additional slide
hook
pre-tansioning
cord
(C)
tansioning cord socket wranch
tension
slide

User Manual
8
7. Storage
Storage has to be in a closed room by min. 15°C tem perature and
a humidity of max. 65%.
8. Cleaning
Please cleanthe Beachvolleyball - game post PRO BEACH only with a moist cloth.
Do not use any caustic chemicals, cleaning solutions or aggressive cleaning agents.
9. Maintenance
 Check net and carabiner clip for deformation and damage.
 Make sure that cord and tensioning cable are undamaged.
 Check groundsocket and game post for damage.
10. Spare parts
Pos. Description Item No.
(10) Polyamid-cord Ø5 – length: 3,5m
in tensioning slide of the tensioning device K0320001
(11) Round cord Ø8 in post K0320161
(1/2)
tension slide
(10)
(3)
(11)

User Manual
9
11. Accessories
 Covering for Version 2A and 2B
for Switch - System for bolding, Art.Nr. 50794
 Border strip for floor panel for Version 2A
for Switch - System for bolding, Art.Nr. 50852
 Border stip for floor panel for Version 2B
 for Switch – System, free standing, Art.Nr. 50795
 Beachvolleyball – competition net
according FIVB, Kevlar tensioning cord and
2Isi-Link-tensioning cords,
length: 8,50 m, Art.Nr. 50739
12. Technical Data
Game post (Art.Nr.: 56848, -50, -60) Profile: 91 x 91 mm
Height: ca. 216 cm
Groundsocket:
Groundsocket Switch (Art.Nr. 56848) with
BEACH – floor panelfor bolding (Art.Nr. 50788) total height: 120 cm
Groundsocket Switch (Art.Nr. 56848) with
BEACH – floor panel with T-base (Art.Nr. 50789) total height: 130 cm
Groundsocket for bolding (Art.Nr. 56850) total height: 120 cm
Groundsocket CITY-BEACH (Art.Nr. 56860) total height: 128 cm
Square timper – Set, set of 4(Art.Nr.: 50774) Profile: 9x9 cm
2timper of 295 cm lenght
2timper of 145 cm lenght
13. Contact Details
Phone: ++49 / 9861 / 406- 44 MO thru THU: 7.30-16.30 hrs
Fax: ++49 / 9861 / 406- 616 FRI: 7.30-12.30 hrs
E-mail: [e-mail]
Internet: www.erhard-sport.de
Postal Address: Delivery Address:
ERHARD Sport International GmbH & Co. KG ERHARD Sport International GmbH & Co. KG
PO Box 1163 Oberer Kaiserweg 8
91533 Rothenburg o.d.T. 91541 Rothenburg o.d.T.