Installing your washing machine
Prior to installing your washing machine:
• Choose a solid and level surface that is away
from direct sunlight.
• Remove the cardboard carton and styrofoam
packaging.
• Lift the washing machine and remove the base
packaging, ensuring the small triangle foam at
the base is removed.
• Remove the tape securing the power supply
cord and drain hose.
• Remove the inlet hose from the drum.
• Remove the transportation bolts.
Please refer to the user manual page 7–9
for more detailed Installation instructions.
Washing Programs
• Cotton: Suitable to wash durable, heat-resistant
textiles made of cotton or linen.
• Jeans: Suitable for washing all types of denim.
• Delicate: This program has a gentle water ow.
Suitable for delicate, washable textiles such as
silk, satin, synthetic bres or blended fabrics.
• Cotton ECO: A economical cotton cycle that
uses lower temperatures and less water over
an extended period of time.
• Spin Only: This program can be used after a
wash to remove excess water. However, the
clothing will not be fully dry.
• Rinse & Spin: Simply rinses the load and then
spins it.
• Hot 90°C: This program should be reserved
for brightening whites, removing stubborn
stains on cotton or linen, killing bacteria on
heavily soiled items or performing a routine
drum clean maintenance wash on your machine.
• Mix: Suitable for mixed fabric loads that require
a more intense cleaning cycle.
• Rapid 45: Suitable for washing lightly dirty
clothes quickly.
• Quick 15: Suitable for light loads with light
soiling of which you would like to be cleaned
in a hurry.
Please refer to the user manual page 14–15
for more detailed Washing Program details.
Preparing the machine for rst use
Before using the washing machine to clean
your laundry. You must perform one complete
cycle without any clothes inside using the
following steps:
1. Connect the power source and water.
2. Insert a small amount of detergent into the
detergent drawer and close it.
3. Turn the Program dial to select a program.
4. Press the “Start/Pause” button to begin the
wash cycle.
5. After the machine has completed its full cycle,
the machine is now ready for use.
Please refer to the user manual page 10–17
for more detailed Operating instructions.
How was your Esatto experience?
Please tell us your story at: esatto.house/review
If you have questions, we are here to help!
Phone: 1300 11 4357
Email: support@residentiagroup.com.au
Product Details
Model: EFLW500
Dry Clothes Capacity: 5kg
Dimensions (W, D, H mm): 595 × 400 ×
Warranty: 2 Years
QSG V1.0
5kg Front Load Washing Machine
Model: EFLW500
Let’s get it started!
