Esatto ETLW55B User manual

User Manual
Exctly wht
you need
Model Code/s:
ETLW55B
ETLW70B
ETLW80B
ETLW100B
Online:
esatto.house
Product:
5.5kg Top Load Washing Machine
7kg Top Load Washing Machine
8kg Top Load Washing Machine
10kg Top Load Washing Machine

Page:
3
User Manual:
Congratulations on purchasing your washing machine. The Esatto brand is proudly
distributed within Australia by Residentia Group Pty Ltd.
Please refer to the warranty card at the rear of this manual for information regarding your
product’s parts and labour warranty, or visit us online at: www.residentia.group
At Residentia Group, we are customer obsessed and our Support Team are there to
ensure you get the most out of your appliance. Should you want to learn more about your
washing machine such as the various washing modes or importantly taking care of the
appliance, our Support Team are here to help.
You can use our online Support Centre at anytime by visiting:
http://support.residentiagroup.com.au
Or you can contact us via phone by dialing: 1300 11 HELP (4357).
It is important that you read through the following use and care manual thoroughly to
familiarise yourself with the installation and operation requirements of your appliance
to ensure optimum performance.
Again, thank you for choosing an Esatto appliance and we look forward to being of
service to you.
Kind Regards,
The Residentia Team
Residentia Group
—
Head Office
165 Barkly Avenue
Burnley, Victoria
Australia 3121
—
ACN
600 546 656
—
Online
residentia.group
—
Postage
PO Box 5177
Burnley, Victoria
Australia 3121
—
Telephone
1300 11 4357
Welcome
Contents: Page:
Safety Instructions 4
Your Washing Machine 6
Installation 7
Operating Instructions 8
Cleaning & Maintenance 16
Troubleshooting 18
Technical Specications 20
Purchase Details 21
Your receipt 21
Warranty Information 22

Page:
5
Page:
4
User Manual: User Manual:
Safety Instructions
For your safety, the information in this manual must be
followed to minimize the risk of re or explosion, electric
shock, or to prevent property damage, personal injury or
loss of life.
• This appliance is not intended for use by
persons(including children) with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
• The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
• The openings must not be obstructed by a carpet.
• This appliance is intended to be used in household and
similar applications such as:
− sta kitchen areas in shops, oces and other
working environments;
− farm houses;
− by clients in hotels, motels and other residential
type environments;
− bed and breakfast type environments;
− areas for communal use in blocks of ats or
in launderettes.
Model Washing
Capacity
Standard Water
Pressure
ETLW55W 5.5kg 0.03MPa~0.8MPa
ETLW70W 7.0kg 0.03MPa~0.8MPa
ETLW80W 8.0kg 0.03MPa~0.8MPa
ETLW100W 10.0kg 0.03MPa~0.8MPa
Explanation of the following signal words:
WARNING!
This signal word indicates a potentially dangerous situation
which may result in death or serious injuries unless it’s
avoided.
CAUTION!
This signal word indicates a potentially dangerous situation
which may result in slight or minor injuries or damage to
property and the environment.
NOTE!
This signal word indicates a potentially dangerous situation
which may result in slight or minor injuries.
WARNING!
POTENTIAL ELECTRIC SHOCK
• This appliance is for indoor use only.
• Do not position washing machine in a humid place.
• Do not insert your hands into running spin-dry tub.
• If the spin-dry tub does not stop within 15 seconds after
opening the cover, please stop using the machine and
have it repaired.
• Before performing any maintenance on the device,
unplug the appliance from the mains.
• Always unplug the machine and turn o the water
supply after use. The max. inlet water pressure, in
pascals. The min. inlet water pressure, in pascals.
• To ensure your safety, power plug must be inserted into
an earthed three-pole socket. Check carefully and make
sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices must
be connected by a qualied technician in accordance
with the manufacturer's instructions and local safety
regulations.
RISK TO CHILDEN
• The appliance can be used by children aged from 8
years an d above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Animals and children may climb into the machine.
Check the machine before every operation.
• Young children should be supervised that they do not
play with the appliance.
• Machine may be very hot during the operation. Keep
kids and pets far away from the machine during the
operation very wet rooms as well as in the rooms with
explosive or caustic gas.
• Remove all packaging before using the appliance.
Otherwise, serious damage may result.
• The washing machine with single inlet valve only can be
connected to the cold water supply. The product with
double inlet valves should be correctly connected to the
hot water and cold water supply.
• Plug must be accessible after installation.
RISK OF EXPLOSION
• Do not wash or dry articles that have been cleaned in,
washed in, soaked in, or dabbed with combustible or
explosive substances( such as wax, oil, paint, gasoline,
degreasers, dry-cleaning solvents, kerosene, etc.) This
may result in re or explosion.
• Before hand thoroughly rinse items of washing by hand.
CAUTION!
INSTALLING THE PRODUCT
• This washing machine is for indoor use only.
• It isn't intended to be built-in using.
• The openings must not be obstructed by a carpet.
• Washing machine shall not be installed in bath room or
very wet rooms as well as in the rooms with explosive or
caustic gases.
• Remove all packaging and transport bolts before using
the appliance. Otherwise, serious damage may result.
• The washing machine with single inlet valve only can be
connected to the cold water supply. The product with
double inlet valves should be correctly connected to the
hot water and cold water supply.
• Plug must be accessible after installation.
RISK OF DAMAGING THE APPLIANCE
• Your product is only for home use and is only designed
for the textiles suitable for machine washing.
• Do not climb up and sit on top cover of the machine.
• Do not lean against machine door.
• Cautions during Handling Machine:
1. Transport bolts shall be reinstalled to the machine
by a specialised
2. The accumulated water shall be drained out of
the machine.
3. Handle the machine carefully. Never hold each
protruded part on the machine while lifting.
Machine door can not be used as the handle during
the conveyance.
4. This appliance is heavy. Transport with care.
• Please do not close the door with excessive force.
• Do not wash carpets.
OPERATING THE APPLIANCE
• Before washing the clothes at rst time, the product
should be operated in one round of the whole
procedures without the clothes inside.
• Do not wash ammable and explosive or toxic solvents.
• Do not use gasoline and alcohol etc. as detergents.
• Please only select the detergents suitable for machine
washing, especially for drum.
• Make sure that all pockets are emptied. Sharp and rigid
items such as coin, brooch, nail, screw or stone etc. may
cause serious damages to this machine.
• Please check whether the water inside the drum has
been drained before opening its door.
Please do not open the door if there is any water visible.
• Be careful of burning when the product drains hot
washing water.
• Never rell the water by hand during washing.
• After the program is completed, Please wait for two
minutes to open the door.

Page:
7
Page:
6
User Manual: User Manual:
Your Washing Machine Installation
PRODUCT DESCRIPTION
NOTE!
The product line chart is for reference only, please refer to real product as standard.
ACCESSORIES
NOTE!
If the drain hose is already installed on the machine, then there is no spring clamper and drain hose in the accessories.
Top lid Water inlet valve
Handle
or
Drain hoseAdjustable feet
or
Power cord and plug
Frame
Inlet hose
assembly
Cabinet
baseboard
User
manual
Screw Spring
clamper
Drain hose
Control panel
Cabinet
INSTALLATION INSTRUCTIONS
It’s recommended to use the washing machine on its own dedicated power outlet
for both convenience and safety. The power outlet must be grounded.
IMPORTANT!
If the power cord is damaged, it must be replaced by Residentia Group or one of
it’s authorised service representatives. Please contact 1300 11 HELP (4357) and
ensure the appliance is completely disconnected from the power supply.
WARNING!
• Stability is important to prevent the product from moving!
• Make sure that the product should not stand on the power cord.
Before installing the machine, the location must be:
1. Rigid, dry, and a level surface
2. Avoiding direct sunlight
3. Sucient ventilation
4. Room temperature is above 0 °C
5. Kept far away from the heat resources such as coal or gas.
UNPACKING THE WASHING MACHINE
WARNING!
• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suocation! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
INSTALLATION OF THE DRAIN HOSE
Drain hose inserted
into the drain
Clamping spring

Page:
9
Page:
8
User Manual: User Manual:
WARNING!
To prevent leakage or water damage, follow the instructions in this chapter carefully:
• Do not kink, crush, modify, sever or protract the inlet hose or drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.
• If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.
There are two ways to place the end of drain hose:
1. For lower drain system
2. For upper drain system
LEVELLING THE WASHING MACHINE
WARNING!
The lock nuts on all four feet must be screwed tightly against the housing.
1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original
positions tighten the nuts.
2. Check alignment of the product with a spirit level and if required, correct.
3. Loosen the lock nut and turn the feet until it closely contacts with to the oor.
4. After being locked properly, press four corners again to make sure that they has been
adjusted properly.
SELECTION OF TAP
Please select appropriate tap.
CONNECTION OF INLET HOSE, TAP AND WASHING MACHINE
1. Connection between ordinary tap and inlet hose.
2. Connection between screw tap and inlet hose.
Ordinary faucet
a) Loosen clamp nut
to show 5mm thread
tap with threads and inlet hose
e) Press slide bushing,
insert inlet hose into
connecting base
b) Loosen four bolts
special tap for washing machine
f) Connection nished
c) Set connecting base
on tap and tighten
bolts evenly
g) After connection and installation,
check if there is water leakage
d) Tighten clamp nut
Screw tap Special washing
machine tap
Operating Instructions

Page:
11
Page:
10
User Manual: User Manual:
PREPARATION BEFORE WASHING
CAUTION!
• Before washing, please make sure it’s installed properly.
• Before washing it at rst time, the washing machine shall be operated in one round of the whole
procedures without clothes in as follows.
WASHING
NOTE!
• If default is selected, step 2, 3 can be skipped.
AFTER WASHING
Buzzer will beep after washing nished and the power supply will be cut o automatically.
Then unload the laundry.
Operating Instructions (Continued)
Plug in
Power On
Open tap
Select Program
Load and Close door
Select Water Level
Add detergent
Start up
WASHING MATTERS NEEDING ATTENTION
• The working condition of the washer should be(0-40)°C. If used under 0°C, the inlet valve and draining system
may be damaged. If the machine is placed under condition of 0°C or less, then it should be transferred to
normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use.
• Please check the labels and the explanation of using detergent before wash. Use non-foaming or less-foaming
detergent suitable for machine washing properly.
WARNING!
• When washing a single clothes, it may easily cause great eccentricity and give alarm due to great unbalance.
Therefore it is suggested to add one or two more clothes to be washed together so that draining can be
done smoothly.
• Don’t washing the clothes touching with kerosene, gasoline, alcohol and other ammable materials.
THE USAGE OF DETERGENT AND WASHING POWDER
• As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it
is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and
overowing while lling water.
• Please choose suitable type of detergent for the various washing temperature to get the best washing
performance with less water and energy consumption.
Check the label
Put small clothes into the
pillow slip
Take out the items out of
the pockets
Turn easy-pilling and
long-pile fabric inside out
Knot the long strips,zip or
button
Separate clothes with
dierent textures

Page:
13
Page:
12
User Manual: User Manual:
Select water level according to clothing categories, degree
of soiling and washing habits of customers.
Press this button to set your Water Level,
where 1 is low and 8 is high.
A solid indicator light indicates the water levels
to the left (1, 3, 5, 7) and a ashing indicator light
indicates the water levels to the right (2, 4, 6, 8).
Press this button to select your
wash function. I.e. Soak, Wash,
Rinse or Spin, or a combination
of these.
After selecting a Program, press the Delay button to choose a
delayed start time. Press Start/Pause to commense the delay
operation.
To switch the delayed start o, simply press the
button until the delay light is o. If the program has already
started, press the Power button to reset the program.
WATER LEVEL:
DELAY:
WASH FUNCTION:
The display shows the settings, estimated time
remaining, options, and status messages for
your washer. The display will remain on through
the cycle.
When LED ashing, it means the time that delay
to start the machine. When LED lighting, it
means the program time that remaining.
CAUTION!
• If there is any break in the power supply while
the machine is operating, a special memory
stores the selected program and when the
power is restarted.
DISPLAY:
Operating Instructions (Continued)
Simultaneously press the Rinse and
Mode buttons to activate the child
lock. Repeat this process to
deactivate the child lock.
NOTE!
• The Child Lock function will
lock all buttons except Power.
CHILD LOCK:
Quick Clean can save between
20-40% of your cycle time by
strengthening the washing beats.
Simultaneously press the Mode
and Temperature buttons to
activate Quick Clean.
Repeat this process to deactivate
Quick Clean.
QUICK CLEAN:
Press this button to
turn your washing
machine On or O.
Press this button to
select your desired
amount of times
to rinse.
Press this button to select your
water temperature. When both the
Hot and Cold indicators are lit, your
washing machine will be set to use
Warm water.
Press this button to select your
wash mode. A solid indicator
indicates the modes to the left,
whereas a ashing indicator
indicates the modes to the right.
After selecting your desired wash
settings, press this button to start
your wash cycle.
You can also use this button to
pause the washing machine during
operation.
POWER:
RINSE:
MODE:
START/PAUSE:
WATER TEMPERATURE:

Page:
15
Page:
14
User Manual: User Manual:
PERSONALISED WASH MODE SETTING
Users can select washing program according to actual demand, set rinsing times, water volume and delay amount.
OPERATIONS OF WASHING PROCESS
Users can set single process or combinations of washing, rinsing and spinning freely according to demand.
Detailed operations as follows for dierent models:
ONE TOUCH SMART WASH
SPIN
WASH + RINSE + SPIN
NOTE!
• There are other process combinations just like the above.
Operating Instructions (Continued)
Power On
Power On
Power On
Power On
→
→
→
→→ →
→
→
→
→ →→
→
Mode Water Level Wash Type
Keep pressing the Wash Type button
until the Spin light is the only one on
Keep pressing the Wash Type
button until the Wash, Rinse
and Spin lights are all on
Rinse
Press Rinse separately,
set desired setting
Temperature Delay Start
Start
Start
Start
WASHING MODES
• MIX
Suitable to wash cotton, linen, ax. jute clothes
• NORMAL (STANDARD)
Standard fabric washing program, suitable to wash ramie cotton fabric. Wash for once, rinsing for
twice, the spin time is a little long.
• JEANS
Suitable to wash heavy stained/wearable clothes.
• SOFT
The tempo is soft, slow washing and spinning speed,
to make the lightest wear and deformation.
• STRONG
The wash time is longer, the stream is stronger, so the washing eect is better.
• HEAVY
Suitable to wash heavy stained/wearable clothes.
• QUICK 15'
Suitable to wash light stained clothes and summer clothes.
• QUICK CLEAN
Start up Quick Clean: Power on, select "Normal", "Soft", "Mix", "Strong", "Jeans" program, then
press the Quick Clean button combinations.
Cancellation of Quick Clean function:
The function can be cancelled by pressing Quick Clean combination buttons
(Mode and Temperature) or Power o.
• FUZZY WEIGHTING
The washing machine will select the water level automatically according to the load weight.
1. When there's water in the tub, this function is not available;
2. Before press [Start/Pause] button, if consumer selected the water level, there will be no fuzzy
weighting function;
3. After press [Start/Pause] button, the washing machine will run the fuzzy weighting function.
Consumer can also select the water level to set the water level as needed.
TEMP.
DELAY

Page:
17
Page:
16
User Manual: User Manual:
Cleaning & Maintenance
CLEANING AND CARE
WARNING!
• Before you begin maintenance, please unplug the machine and close the tap.
CLEANING THE CABINET
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned
with diluted non-abrasive neutral detergents when necessary. If there is any water overow, use the
wet cloth to wipe it o immediately. No sharp items are allowed.
NOTE!
• Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents or
chemical products, etc.
CLEANING THE INLET FILTER
NOTE!
• Inlet lter must be cleaned if there is less water.
Washing the lter in washing machine:
1. Screw o the inlet pipe from the rear of the machine.
2. Pull out the lter with long pliers and reinstall it back after being washed.
3. Use a brush to clean the lter.
4. Reconnect the inlet pipe.
Lint lter clean:
1. There is a built-in lint lter in your washer. It can help to collect lint during
washing cycle.
2. It is suggested to clean the lint lter every 10 cycles.
3. Take it out and clean the lter with water. Then place it back into the washer.
Magic lter
Normal lter
CLEANING THE DRAIN PUMP FILTER
WARNING!
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump lter can lter the yarns and small foreign matters from the washing.
• Clean the lter periodically to ensure the normal operation of washing machine.
CAUTION!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be
inserted aligning to hole plates otherwise water may leak;
• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the program selected there can be hot water in
the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has
nished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
Drain the water out
of the pump, using a
container to collect
Clean the lter
Open the lter by turning
to the counter clockwise
Restore it and adjust the
convex place to align at the
pump hole
Remove foreign objects
Tighten the pump
cover clockwise

Page:
19
Page:
18
User Manual: User Manual:
Troubleshooting
OPERATION IN CASE OF EMERGENCY
In the event of an emergency you should:
• Switch o all controls.
• Switch the washing machine o at the power point or at the fuse box.
• Call the Residentia Support Team on 1300 11 HELP (4357).
Some minor faults can be xed by referring to the instructions given in the Troubleshooting section
below. There is also a self-help section online at https://support.residentiagroup.com.au/
DESCRIPTION INSPECTION ITEMS
No washing
• If the power is o or the fuse is burned out.
• If the power supply voltage is too low.
• If the water amount reaches to the required water level.
(The washer will not work if the water amount does not reach the required
water level)
• If it is set to "Delay" washing mode. (It will only start to work until the
reservation time reached)
No water flows in
• If the power is o or the fuse is burned out.
• If the water supply is cut o or the water pressure too low.
• If the inlet hose is properly connected and the water tap is opened.
• If the filtering screen of inlet valve is blocked by dirt.
• If the coil of inlet valve is damaged. (The slight electromagnetic sound is normal
phenomenon when the inlet valve is switched on)
• If the "Start/Pause" button is pressed after the power switch is pressed.
Abnormal draining
• If the water drain hose is placed very high.
• If the end of water drain hose is sealed in pond.
• If the internal rubber ring of drain valve is blocked by dirt.
Abnormal spin
• If the door lid is closed.
• If all clothing piled largely at one side of barrel or the clothing is
excessively placed.
• If the washer is not placed in stable condition or it is placed in inclination state.
(The ground is not flat).
• If the motor belt is loosened.
When the washing machine experiences a fault, please contact the Residentia Group support team on:
Telephone: 1300 11 HELP (4357).
WARNING! Never dismantle the washing machine.
ERROR MESSAGES AND SOLUTIONS
INDICATION REASON SOLUTION
"E1" displays Alarm for
abnormal water intake.
Check the water tap is opened
or not
"E2" displays Alarm for water drain
has not finished.
Check the water level
sensor and drain pump
"E3" displays Alarm for lid not closed
before wash and spin.
Close the lid, Press "Start" button
"E4" displays
Alarm for washing stay
at one side.
Manually balance clothes
in the barrel by hand.
Other If problems still occur, please contact
the support team with the number at
the top of this page.

Page:
21
Page:
20
User Manual: User Manual:
Technical Specications
Below outlines the technical specications for your Esatto Washing Machine.
ETLW55W ETLW70W ETLW80W ETLW100W
Size 515w  525d  910h
(mm)
550w  565d  935h
(mm)
580w  596d  968h
(mm)
601w  630d  1000h
(mm)
Net Weight 31kg 38kg 39kg 45kg
Rated Input Power 400W 450W 480W 600W
Rated Capacity of
Wash and Spin
5.5kg
(dry clothes)
7.0kg
(dry clothes)
8.0kg
(dry clothes)
10.0kg
(dry clothes)
Rated Voltage 240V~ 240V~ 240V~ 240V~
Rated Frequency 50Hz 50Hz 50Hz 50Hz
Maximum water
pressure permitted in
the water inlet
0.03MPa 0.03MPa 0.03MPa 0.03MPa
Minimum water
pressure permitted in
the water inlet
0.8MPa 0.8MPa 0.8MPa 0.8MPa
NOTE:
This product is subject to continuous improvement, specication are subject to change without prior notice.
This product was tested in accordance with AS/NZS 2040.2 and AS/NZS6400 using program: Standard, which is the
program recommended for a normally soiled cotton load at rated capacity.
Attach your receipt
to this page
Purchase Details
For future reference, please record the following information which can be found on the rating plate
and the date of purchase which can be found on your sales invoice.
STORE DETAILS
STORE NAME
|
ADDRESS
|
TELEPHONE
|
PURCHASE DATE
|
PRODUCT DETAILS
MODEL NO.
|
SERIAL NO.*
|

Page:
23
Page:
22
User Manual: User Manual:
AUSTRALIA WARRANTY TERMS & CONDITIONS
LAUNDRY APPLIANCES
This document sets out the terms and conditions of the
product warranties for Residentia Group Appliances. It is
an important document. Please keep it with your proof of
purchase documents in a safe place for future reference
should you require service for your Appliance.
1. IN THIS WARRANTY
(a) ‘acceptable quality’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian
Consumer Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Residentia Group product
purchased by you accompanied by this document;
(d) ‘ASR’ means Residentia Group authorised service
representative;
(e) ‘Residentia Group’ means Residentia Group Pty Ltd
of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656
in respect of Appliances purchased in Australia;
(f ) ‘major failure’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL
and includes a situation when an Appliance cannot
be repaired or it is uneconomic for Residentia Group,
at its discretion, to repair an Appliance during the
Warranty Period;
(g) ‘Warranty Period’ means:
(i) where the Appliance is used for personal,
domestic or household use (i.e. normal
single family use) as set out in the instruction
manual, the Appliance is warranted against
manufacturing defects for 24 months, following
the date of original purchase of the Appliance;
(h) ‘you’ means the purchaser of the Appliance not having
purchased the Appliance for re-sale, and ‘your’ has a
corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia and is in addition to (and does
not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia.
3. During the Warranty Period Residentia Group or its
ASR will, at no extra charge if your Appliance is readily
accessible for service, without special equipment and
subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Residentia
Group or its ASR may use remanufactured parts to
repair your Appliance. You agree that any replaced
Appliances or parts become the property of Residentia
Group. This warranty does not apply to light globes,
batteries, lters or similar perishable parts.
4. Parts and Appliances not supplied by Residentia Group
are not covered by this warranty.
5. You will bear the cost of transportation, travel and
delivery of the Appliance to and from Residentia Group
or its ASR. If you reside outside of the service area,
you will bear the cost of:
(a) travel of an authorised representative;
(b) transportation and delivery of the Appliance to and
from Residentia Group or its ASR, in all instances,
unless the Appliance is transported by Residentia
Group or its ASR, the Appliance is transported at
the owner’s cost and risk while in transit to and from
Residentia Group or its ASR.
6. Proof of purchase is required before you can make
a claim under this warranty.
7. You may not make a claim under this warranty unless
the defect claimed is due to faulty or defective parts
or workmanship. Residentia Group is not liable in the
following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly
maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or
incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions
supplied with the Appliance;
(b) the Appliance is modied without authority from
Residentia Group in writing;
(c) the Appliance’s serial number or warranty seal has
been removed or defaced;
(d) the Appliance was serviced or repaired by anyone
other than Residentia Group, an authorised repairer
or ASR.
8. This warranty, the contract to which it relates and the
relationship between you and Residentia Group are
governed by the law applicable where the Appliance
was purchased.
9. To the extent permitted by law, Residentia Group
excludes all warranties and liabilities (other than as
contained in this document) including liability for any
loss or damage whether direct or indirect arising from
your purchase, use or non use of the Appliance.
10. For Appliances and services provided by Residentia
Group in Australia, the Appliances come with a
guarantee by Residentia Group that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled
to have the Appliance repaired or replaced if the
Appliance fails to be of acceptable quality and the
failure does not amount to a major failure. The benets
to you given by this warranty are in addition to your
other rights and remedies under a law in relation to the
Appliances or services to which the warranty relates.
11. At all times during the Warranty Period, Residentia
Group shall, at its discretion, determine whether repair,
replacement or refund will apply if an Appliance has a
valid warranty claim applicable to it.
12. To enquire about claiming under this warranty, please
follow these steps:
(a) carefully check the operating instructions, user manual
and the terms of this warranty;
(b) have the model and serial number of the Appliance
available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
13. You accept that if you make a warranty claim,
Residentia Group and its ASR may exchange
information in relation to you to enable Residentia
Group to meet its obligations under this warranty.
IMPORTANT
Before calling for service, please ensure that the steps
in point 12 have been followed.
→ Service: Please call 1300 11 HELP (4357)
The Australian Consumer Law requires the inclusion of the following statement with this warranty: Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Warranty Information

This page
is intentionally
left blank
Appliances
Exctly wht
you need
A RESIDENTIA
GROUP INITIATIVE