manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Esoteric
  6. •
  7. Media Player
  8. •
  9. Esoteric N-03T Use and care manual

Esoteric N-03T Use and care manual

1
N-03T Firmware update manual
Models covered
N-03T
Equipment used
Windows computer (with built-in USB 2.0 port)
Micro USB cable
oCables designed only for charging cannot be used. Always use a
micro USB cable that supports data transmission.
Supported operating systems
Windows 7 (32/64-bit)
Windows 8 (32/64-bit)
Windows 8.1 (32/64-bit)
Windows 10 (32/64-bit)
As of June, 2018
NOTE
In this manual, we refer to the N-03T as “the unit”.
Checking the firmware version
1 Turn the unit on while pressing the + button.
The firmware version will be shown.
Display example
I / F V1.00
2 After checking the rmware version, press the
MENU button.
oIf the version shown is the latest version, there is no need to
update the unit.
Microsoft and Windows are either registered trademarks or trade-
marks of Microsoft Corporation in the United States and/or other
countries.
Other company names and product names in this document are
the trademarks or registered trademarks of their respective owners.
N-03T Firmware update manual
2
Update procedures
A micro USB cable is necessary to update the firmware.
Use a commercially-available micro USB cable.
IMPORTANT NOTICE
Different firmware update programs are made for every
model. Execution of a firmware update program for a different
model will make this unit unusable.
NOTE
The screens used in these instructions are from Windows 7.
Installing the driver for the update
After installing this on the computer once, installing it again will not
be necessary.
1 Download Win_DFU_driver.exe.
Save it anywhere on the computer.
2 Double-click Win_DFU_driver.exe.
3 When “Press any key to continue...” appears,
press the Enter key.
Display example
* DFU driver for“Windows7 32bit” will be installed.
Press any key to continue...
NOTE
If a “User Account Control” pop-up message appears during
installation, click “Yes”.
4 When the Device Driver Installation Wizard
appears, click “Next”.
5 Click “Finish”.
Updating the firmware
oDo this after installing the driver for the update.
1 Turn the unit off and disconnect all cables
other than the power cord.
2 Press the POWER button while pressing the +
button to turn the unit on.
The firmware version will be shown.
Display example
I / F V1.00
3
N-03T Firmware update manual
3 Press the − button twice.
Press twice
This puts the unit into firmware update mode.
I / F UPDATE
oAll button operations, including the POWER button, on the
unit will be disabled while in this mode.
4 Use a USB cable to connect the computer to
the USB Micro-B maintenance (SOFTWARE)
port on the back of the unit.
Computer
Micro USB cable
oRefer to the unit’s operation manual for the location of the
maintenance (SOFTWARE) port.
oThe USB driver will be installed on the computer automati-
cally. Wait until it is complete.
5 Double-click N-03T_vxxx_updater.exe.
oN-03T I/F firmware updater
* Please set N-03T to F/W update mode.
Press any key to continue...
6 Confirm that the model name shown on the
screen matches that of the unit, and press the
Enter key.
Do not turn the unit power off or disconnect the USB cable
while updating. Doing so could make the unit not operate
properly.
NOTE
The following screen will appear if the unit is not recognized
by the computer. Click the × at the top right of the window to
close it.
0 Device(s) found. Plug your DFU Device !
Target 00: Error Code: Unknown error 0×12340005.
Target: 00
Error Code: Unknown error 0×12340005.
TransferSize: 0
DFU State: (Unknown 0×74)
DFU Status: STATUS_OK
Request: (unknown 0×2A59AD94).
CurrentNBlock: 0×F9743F6A
CurrentLength: 0×76C4EF
Percent: 0
If the screen shown above appears, check the following items
and repeat step 5.
oInstall the driver for the update.
oPut the unit into firmware update mode (“I/F UPDATE”
should appear on the display and pressing the POWER but-
ton should not turn the unit off )
oUse a USB cable to connect the computer to the mainte-
nance (SOFTWARE) port on the back of the unit.
ATTENTION
oCables designed only for charging cannot be used for firm-
ware updates. Always use a USB cable that supports data
transmission.
oConnecting to a different USB port on the computer might
allow it to recognize the unit.
oTo cancel updating when the above screen appears, discon-
nect the power cord of the unit from the outlet once.
Continued on the next page e
N-03T Firmware update manual
4
7 When “* Writing is completed.” appears, press
the Enter key to close the window.
1 Device(s) found:
Device [1]: STM Device in DFU Mode, having [4] alternate targets
Target 00: Upgrading - Download Phase (100)...Duration: 00:00:14
Upgrade successful !
* Writing is completed.
* Please unplug the AC cord and plug it in again.
Press any key to continue...
8 Disconnect the power cord of the unit from the
outlet.
Since the POWER button is disabled when the unit is in firm-
ware update mode, the power cannot be turned off without
disconnecting the power cord.
9 Disconnect the USB cable from the mainte-
nance (SOFTWARE) port.
10
Connect the power cord of the unit to an out-
let, and check the rmware version.
Follow the procedures in “Checking the firmware version” on
page1 and check the firmware version.
After confirming that the unit has been updated to the latest
version, reconnect the disconnected cables as they were before.
0618 MA-2602A

Other manuals for N-03T

1

Other Esoteric Media Player manuals

Esoteric N-03T User manual

Esoteric

Esoteric N-03T User manual

Esoteric UX-1 Pi User manual

Esoteric

Esoteric UX-1 Pi User manual

Esoteric UX-3 User manual

Esoteric

Esoteric UX-3 User manual

Esoteric N-01 User manual

Esoteric

Esoteric N-01 User manual

Esoteric Esoteric UZ-1 User manual

Esoteric

Esoteric Esoteric UZ-1 User manual

Popular Media Player manuals by other brands

Viewlad HD Media Player user manual

Viewlad

Viewlad HD Media Player user manual

Pronomic CDJ-600 user manual

Pronomic

Pronomic CDJ-600 user manual

Roku SoundBridge M1000 user guide

Roku

Roku SoundBridge M1000 user guide

Teac NT-503 Network manual

Teac

Teac NT-503 Network manual

BARIX EXSTREAMER 100 installation instructions

BARIX

BARIX EXSTREAMER 100 installation instructions

MOOD PROFUSION iS quick start guide

MOOD

MOOD PROFUSION iS quick start guide

Diablotek YT263BK2G specification

Diablotek

Diablotek YT263BK2G specification

Denver MP-1820 manual

Denver

Denver MP-1820 manual

Custom Engineering ?Player user guide

Custom Engineering

Custom Engineering ?Player user guide

Roksan Audio Xerxes.20 user manual

Roksan Audio

Roksan Audio Xerxes.20 user manual

CAMBRIDGE EDGE NQ user manual

CAMBRIDGE

CAMBRIDGE EDGE NQ user manual

Giada G468 user manual

Giada

Giada G468 user manual

I.D. AL VideoPlayer VP200HD user manual

I.D. AL

I.D. AL VideoPlayer VP200HD user manual

Yamaha MCX-RC100 Getting started guide

Yamaha

Yamaha MCX-RC100 Getting started guide

DANE-ELEC SO ROAD MOVIE datasheet

DANE-ELEC

DANE-ELEC SO ROAD MOVIE datasheet

Bones Milestone 212 Ace user manual

Bones

Bones Milestone 212 Ace user manual

Teac NT-503 owner's manual

Teac

Teac NT-503 owner's manual

Theta Digital Casablanca IV owner's manual

Theta Digital

Theta Digital Casablanca IV owner's manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.