ESP HDVIPCPTZC Installation instructions

www.espuk.com
The latest product manual and software is available online:
https://www.espuk.com/technical_support/
HDVIPCPTZC Keyboard controller
USER INSTRUCTION
USE/INSTALLATION
Rev. F21

- 0 1 -
1.Product Description
1.1 Descrip�on
The network IP keyboard adopts the new design of PC + ABS outer case. It is light and
easy to operate. The bottom is designed with a non-slip silicone pad that can be operated
with one hand. The IP keyboard uses an industrial-grade 5-inch LCD screen.
With Solution 1920 * 1080P H.264/265 stream, super wide viewing angle IP opera�on
keyboard. Using import 4D joys�ck, stepless knob buttons, and silicone buttons with
great opera�ng feel. The buttons are fully func�onal, which effec�vely solves the
inconvenience of the current web-page operation of the PTZ. The appearance is simple
and beau�ful; the display effect is excellent, and the image characters are delicate and
clear. IP keyboard supports ONVIF protocol, compatible with 99% PTZ cameras on the
market. Easy operation, only a few steps to achieve perfect control of PTZ Cameras.
1.2 Product Features
(1) Support ONVIF protocol, with independent IP address in IP mode.
(2) Equipped with stepless knob keys to adjust the control speed and zoom speed.

- 0 2 -
1.3 Product Appearance
Power switch
Power interface
IP Interface
RS232
RS422
No. Name Function
1
2
3
4
5
Power switch
Power interface
IP Interface
RS232
RS422
Standard5.5/2.1powerinterface;DC12V2A±10%
Connecting to the Internet
No function Currently
No function Currently
1.4 Interface Description
(3) With Import variable-speed 4D joystick
Twist the joystick to control the PTZ camera directly.
(4) Support standard POE power supply.
(5) The bottom is designed with non-slip silicone pad.

- 0 3 -
Product Connection Diagram with onvif protocol
Camera and keyboard need to be connected to the same LAN.
Cable
1.5 System Topology diagram
Cable
2. Keyboard function
2.1 Button Description
(1) SET PRESET: Example: Set Preset 1
[SET PRESET ] > [1] > operate the camera> [ENTER]
video
conference
camera
Dome
camera
PTZ
Camera

- 0 4 -
A. Press [SET PRESET] button, and the text “Set preset ” appears in the lower right
corner of the screen.
B. Press the number [1], the number 1 appears on the screen in the back of the
"Set preset "
C. Operate the joys�ck to move the camera to the posi�on you want to set the preset.
Press [ENTER] to confirm.
(Note: set up to 99 preset Max)
CALL PRESET: Example: Call preset 1
[CALL PRESET] > [1] > [ENTER]
A. Press the [CALL PRESET] button, and the text “call preset” appears in the lower
right corner of the screen.
B. Press the number [1] button, the number 1 appears on the screen in the back
“call preset ”
C. Press [ENTER] button, the camera will move to preset 1 posi�on.

- 0 5 -
SEARCH: Example: adding the IP address of a camera
A. Press [SEARCH] key to enter, move the joys�ck to the right, select search, and
press [ENGER] or the middle button of the joys�ck to confirm the search.
B. Use the joys�ck to select the IP, press the middle button of the joys�ck to select,
joys�ck move right to select the new one, and press the middle button of the
joys�ck to add.
C. Fill in the correct user name and password, and press the number keys
con�nuously to switch between uppercase and lowercase letters.
D. Select Save and press the middle button of the joys�ck to confirm and save.
LIST: View the list of added devices, you can edit or delete.
Device List
Search Device
Manually Add
System Set
Network Set
Exit
Device
select Number address port protocol
1
2
3
4
Onvif
Onvif
Onvif
Onvif
8000
8000
80
8999
Select All Cancel Delete Edit
192.168.0.181
192.168.1.101
192.168.1.108
192.168.1.168

1~9: Single point is a number key function / continuously press to switch letters
CAM: For quick camera switching
Example: Press[CAM] +Serial numberincameradevicelist+[ENTER]
PREVIOUS: Quickly switchtothecamerawithaserialnumberonthe list ofadded devices
NEXT: Quickly switch to the camera with the next serial number in the list of
dded devices
CLEAR: Delete one ENTER: confirm ZOOM+
ZOOM- FOCUS+ FOCUS-
IRIS+ IRIS- AUTO FOCUS
AUTO IRIS F1: No function, it is for expanding function
F2: No function, , it is for expanding function
2.2 Knob Description
Operating Output
Control Operating Output
Control Operating Output
Control
Downward
Upward Left
- 0 6 -

2 . 3 K n o b D e s c r ip tio n
(1) P/T SPEED: PTZ control speed Turn the knob to the right + Turn to the left-
(2) ZOOM SPEED
3. PTZ and Keyboard connection
3.1 Make sure the camera has open ONVIF protocol
(Example)
(1) Input the IP address of the camera, enter the WEB interface.
(2) Configura�on---Network----Advanced Configura�on----Integra�on Protocol
(3) Tick and enable ONVIF protocol
(4) Add an administrator account (the same as the account you use to ac�vate
the camera)
(5) Save
5
4
Press the middle joystick button to confirm in menu mode
Operating Output
Control Operating Output Control Operating Output Control
Right Zoom + Zoom
32
2
2
- 0 7 -

(1) Press <SEARCH> to the search device, move the red cursor to the right to jump into
the search, press the middle button of the joys�ck to confirm the search for the
device, select the device to be added, press OK, and then move the red cursor to New.
Enter the camera user name and password to save (the camera and keyboard must be
on the same network segment)
3.2 ONVIF connection
Device List
Search Device
Manually Add
System Set
Network Set
Exit
Search>Results
select Number address port protocol
1
2
3
4
IPD-D53M02
IPC
80
8999
81
80
Select All Cancel Delete Edit
192.168.0.23
192.168.0.149
192.168.0.108
192.168.0.214
580192.168.0.215
68999192.168.0.238
IPC
IPC
Device List
Search Device
Manually Add
System Set
Network Set
Exit
Search>Results
select Number address port protocol
1
2
3
4
IPD-D53M02
IPC
80
8999
81
80
Select All Cancel Delete Edit
192.168.0.23
192.168.0.149
192.168.0.108
192.168.0.214
580192.168.0.215
68999192.168.0.238
IPC
IPC
- 0 8 -

(2) Press the MENU button to enter the menu and select to manually add the
camera IP, port, user name, password, and select the Onvif protocol point to
save (the camera and keyboard must be on the same network segment)
Device List
Search Device
Manually Add
System Set
Network Set
Exit
Search>Adduser
Save Cancel
Username
Password
admin
admin
Device List
Search Device
Manually Add
System Set
Network Set
Exit
Search>Adduser
Save Cancel
Username
Password
192.168.0.181
80
admin
admin
Password onvif
ip address
port
- 0 9 -

- 1 0 -
4. WEB Upgrade
4.1 System Upgrade
The keyboard and the computer are connected to the same local area network.
Enter the keyboard IP address on the browser, then enter the keyboard upgrade page.
(3) The successfully added devices can be viewed in the device list and exit to the
main interface. Press the CAM key + number keys + confirmation key to select
the online device.
The upgrade func�on is used as the maintenance and update keyboard function.
After entering the upgrade page, select the correct upgrade file and click "Start".
The device will automatically restart after the upgrade is completed.
Ps:Do not perform any operations on the device during the upgrade
process, and do not power off or disconnect the network!
4.2 System reset
When the device cannot be used normally due to the modification of some
configurations, the device can be restored to the factory value through system
settings and factory reset. Use with caution when the device is working properly
4.3 System restart
After the device is used for a long time and needs to restart maintenance,
click Restart to achieve the purpose of restarting maintenance

www.espuk.com
Elite Security Products
Unit 7, Target Park,
Shawbank Road, Lakeside,
Redditch B98 8YN
Telephone: [phone]
Fax: [phone]
Email: [email protected]
www.espuk.com
E&OE - Errors and omissions excepted.I19