Essential Audio Tools Mains Multiplier Myni User manual

User Manual
Rev 2.0 July 2022
Mains Multiplier Myni
essentia
audiotoo
s

essentia
audiotoo s
Introduction ………………………………….........…………………… page 2
Description ………………………………….........…………………… page 3
Safety precautions ………………………………….........…………………… page 4
Connections ………………………………….........…………………… page 5
Specifications ………………………………….........…………………… page 6
Problem solving ………………………………….........…………………… page 7
Warranty ………………………………….........…………………… page 7
Contents
Thank you for purchasing this Essential Audio Tools Mains Multiplier Myni!
‘Essential Audio Tools’ is a Square Audio brand name. The name speaks for itself, tools
which are very essential for music reproduction. Better reproduction often means more
involvement.
Our ‘Essential Audio Tools’ are products to improve the sound of your audio equipment
where it all begins: the mains power supply. The power from the mains socket is being
‘abused’ even before it enters your audio equipment. The energy company uses the mains
supply to control government property equipment, like streetlights. Also other equipment is
communicating with each other by use of the mains power supply. But there is more: the
past 25 years switching power supplies have made their way into computers, TV’s and
other home appliances. These devices pollute the mains supply with nasty pulses. This
“Trojan Horse” comes into your equipment without you being aware of it. The pollution has
to be taken out of the mains power supply before it reaches your (analogue) audio
equipment. The Essential Audio Tools cables, distribution boxes, filters and phase indicator
make any audio set perform better.
Essential Audio Tools invests lots of time and effort to make products as good as they can
be. They are all made with use of precision CNC machining. Beautifully shaped,
well-designed and manufactured from top-quality material by experts. Experience the
quality of our products and listen to the results, then you know what we mean.
We wish you lots of pleasure!
Introduction
2.

essentia
audiotoo s
The Mains Multiplier Myni is not a regular multiple socket but more a work of art made on a
CNC machine that shapes this form out of one piece synthetic material. Yes… synthetic!
The results speak for themselves, optical as well as electrical.
The type of outputs is chosen because of the high contact pressure, which is obvious when
putting in or pulling out an electric plug. More contact pressure and an optimal contact
surface do create a low resistance value. This is very important for good power distribution.
The wiring for phase, neutral and earth is connected by a star principle. Every output has
its own wiring towards the feed cable. Peaks in the current or interference signals that
appear on contacts of one socket will now have less effect on the other sockets.
A ‘Pulse Protector’ is integrated behind the IEC input connector. This prevents peaks and
pulses reaching your audio equipment. Our Pulse Protector is also available as a separate
tool, please check our website.
Essential Audio Tools power cords are built with two layers of screening; a 100% closed
aluminium foil and a tinned braided copper screen. This double shielding protects the
nearby signal cables from the fields generated by the current flowing through the
conductors. It also works the other way around: preventing the conductors picking-up
airborne disturbances from the environment. The twisted Oxygen Free Copper (OFC)
conductors are fully capable of transporting the current your equipment needs without
ohmic losses.
Where to use
Wherever you need to connect multiple loads to the mains, the Mains Multiplier is the best
choice. The Mains Multiplier Myni is specifically designed to be positioned next to your
audio equipment. This is possible by an integrated cage of faraday made out of pure
copper which has excellent conductive characteristics. This luxurious addition is one of a
kind within the world of high-end audio in this price range.
What to expect
An improvement in dynamics, a much better sound image and a lower hum level. The
sound character of your audio system remains, fortunately!
By using the Mains Multiplier Myni with integrated Pulse Protector your equipment has less
trouble with electrical failures induced by distortion on your network, and it is better
protected against damage through lightning impacts nearby. A guarantee that lightning
impacts will not damage your equipment can not be given because the energy-content
of lightning is too high.
Description
Tips
• For maximum noise reduction, it is best to keep power cords and audio cables in your
setup separated by some distance from each other, also avoid routing cables in parallel.
• Use high-quality power cords (our Myni Conductor series) to connect your equipment.
The screenings will prevent stray-fields reaching your audio cables. Order your power cords
as short as possible, for best results.
• Do not connect distribution blocks or mains splitters to the outputs. It will possibly cause
interference.
• Feed ALL your equipment from the Mains Multiplier Myni. Having an extra external power
feed to one of your pieces of equipment will possibly cause interference and/or hum.
3.

For your protection and safe operation of the unit, please read the following:
Avoid water and other liquids
To avoid risk of fire and electrical shock: do not expose this device to moisture. Use indoors
and in dry locations only. Do not expose to dripping and/or splashing. Do not place objects
filled with liquids -such as vases- on or near the device. Do not operate the unit if any liquid
is spilled on or into the unit; return it to your dealer for servicing.
Don't open the device
To avoid risk of electrical shock: do not open the device. There are no user serviceable
parts inside. Repairs are to be performed by qualified personnel only.
Unplug before cleaning
Always unplug the unit before cleaning. Only clean the unit with a dry cloth or duster.
Do not use any cleaning solutions, sprays or water.
Connect to mains ground
For safety reasons and to protect connected equipment, this product MUST be connected
to mains with a three conductor power cord which includes a working ground conductor.
The power cord MUST be plugged into a grounded AC power outlet (3-pin). Do not use a
3-to-2-pin adapter to bypass the grounding pin. Failing to plug this product into a
grounded outlet through a ground conductor including mains cord may result in personal
injury or damage to your equipment. Call a licensed electrician if you are unsure if your AC
outlets are properly grounded.
Do not overload individual outputs
Do not connect loads which draw more current than the maximum rating for each
individual outlet. Possible damages due to exceeding these maximum ratings will void
warranty. The MAXIMUM CURRENT rating for each outlet may differ, please look at the
Specifcations for maximum load specifications.
Do not exceed maximum total load
The total current drawn from all outlets together may not exceed 5 Amps. At 230 Volts
mains supply this is equivalent to 1150W.
Check your supply voltage
This device is designed for 220-240V~ @ 50/60 Hz mains supply. Connecting to a different
voltage may damage the device and warranty will be void.
Avoid condensation
If the device is moved from a cold to a warmer area, allow the product to warm up to
room temperature before connecting it to the mains supply. This is to avoid condensation
inside the device.
Connect power cords safely
Power cords should be routed in such a way that they are not likely to be walked on or
pinched by items. Do not route power cords near heat sources. To disconnect the power
cord, pull it out by the plug (wall outlet side first). Do not pull the cable itself, doing so may
result in damage which can lead to fire or electric shock.
Safety precautions
4.

essentia
audiotoo s
Figure 3. Mains Multiplier Myni
The Mains Multiplier Myni has two HF filtered outputs, see figure 3.
They all have a maximum current of 5 Amps each, however the total current of all outputs
may also not exceed 5 Amps.
Your Mains Multiplier Myni must be connected to an earthed mains supply wall socket,
however if you do not have earth the Mains Multiplier Myni will still function. The Mains
Multiplier Myni itself will make a connection between all earth contacts of your equipment.
This will prevent that small currents will run through your interlinks due to differences
between earth potentials at your equipment’s chassis. So even without an earthed wall
socket you should keep using your earthed power cords.
Filtered
Figure 1. IEC C14 Inlet IEC C13 Outlet
Connections
Integrating your new Mains Multiplier Myni is as easy as can be.
Just connect the Mains Multiplier Myni to your wall socket. Use a phase indicator (like our
Sound Saver) to test which contact of your mains supply socket is phase. You’ve found it
when the LED indicator lights up. Essential Audio Tools power cords (Current Conductors)
are marked with a red dot to indicate the phase. This mark should face the side of your
mains socket which is phase. For countries with an earth pin in the middle of the wall
socket (France, Belgium) it is not possible to reverse the power cord plug in the wall
socket. You should ask a technician to reverse the neutral and phase in your wall socket,
NOT in your power cord. Don’t do this yourself, the mains voltage is dangerous!
The Mains Multiplier Myni uses a type of connection never seen before in high-end audio
power strips. The IEC contacts provides remarkable contact pressure, ensuring superior
electrical conduction. More contact pressure and an optimal contact surface do create
a low resistance value which is very important for a good power distribution.
The Mains Multiplier Myni has a
build in slot for a fuse. This fuse,
additional to the pulse protector
inside, will protect your
equipment and the multiplier itself
from malfunctions. The slot is
easily accessible from the top of
the product. When replacing the
fuse make sure the multiplier is
disconnected from the mains
supply.
5.

essentia
audiotoo s
Specifications
Mains Multiplier Myni
Rated voltage 220-240V~ @ 50/60 Hz
Maximum continuous current per socket 5A
Maximum continuous total current 5A
Maximum continuous total power 1150W
Protecting Phase-Neutral, Phase-Earth and Neutral-Earth
Maximum voltage 250V~
Maximum peak-voltage 2500V
Maximum peak-current 4500A
Maximum peak-energy 3 x 65 Joule
Response time < 25 nanoseconds
For Mains Multiplier Myni
Size 183(l) x 54(w) x 43(h) in mm
Weight 0,48 kg
Current Conductor S
Mains Connector Schuko
Conductor type OFC, stranded
Screening Braided tinned copper + aluminium foil
Rated voltage 220-250V~ @ 50/60 Hz
Output connector C13
Outer diameter 8mm
Conductors [mm2] 3x 0,75
Maximum current 6A
Myni Conductor IEC
Input connector C14
Conductor type OFC, stranded
Screening Braided tinned copper + aluminium foil
Rated voltage 220-250V~ @ 50/60 Hz
Output connector C13
Outer diameter 8mm
Conductors [mm2] 3x 0,75
Maximum current 5A
6.
Myni Conductor IEC
Current Conductor S

essentia
audiotoo s
There are no serviceable parts inside. Do not open your Mains Multiplier Myni!
Please check the following before requesting service:
1 – Check the wall socket by plugging in a light or load to check if the power is present.
2 – Check if the power cord from the wall socket to the Mains Multiplier is functioning and
make sure the power cord is plugged deep enough into the Mains Multiplier’s input.
3 – Check your equipment and the power cord by connecting them directly to a wall
socket to test if they work without the mains multiplier in between.
4 – Check if the fuse hasn’t blown. If the fuse has blown, replace the fuse with a
T5A/250V fuse. A spare fuse can be found in the fuse holder.
- Do not keep replacing the fuse if it blows immediately after you replace it. -
Please contact your local dealer if all of the above is tested and working, but the unit is still
not functioning.
Problem solving
Warranty
Essential Audio Tools products have a warranty period of two years from date of purchase.
This warranty covers manufacturing defects and failures within products specifications.
When warranty is claimed the original bill with the buyer’s name and date of purchase
should be presented.
Warranty will void if:
• The device has not been used in conformance with the user manual.
• The device has been used in an industrial environment.
• The bill has been altered or made illegible.
• Modifications or repairs have been performed by non-authorized persons.
• Malfunction is caused by device-external conditions, such as:
overloading, atmospheric discharges and fire or water damages etc.
Warranty is limited to damages regarding the Mains Multiplier itself:
all eventual consequential damages are not covered by warranty.
More information about our products:
7.

essentia
audiotoo
MORE INFORMATION:
WWW.ESSENTIALAUDIOTOOLS.COM
s
Essential Audio Tools: CopyRight by Square Audio BV, The Netherlands, [email protected]