Estross Et-8848 User manual

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

1

301, 3/F, Block B, Yuetong Comprehensive Bldg. Meilong Rd, Longhua, Bao ’ an District

Shenzhen China 518109

TEL ：+86-755-26205464 FAX ：+86-755-28167031

GSM

GSM FWT-8848

FWT-8848

FWT-8848 (

(

( Gateway

Gateway

Gateway )

)

U

U ser's

ser's

ser's Manual

Manual

Brand:

Brand: Etross

Etross

Model:

Model: ET-8848

ET-8848

Manufacturer

Manufacturer :

:

: Shenzhen

Shenzhen

Shenzhen Etross

Etross

Etross TelecomCo.,Ltd

TelecomCo.,Ltd

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

2

GSM

GSM FWT-8848

FWT-8848

FWT-8848 Version

Version

Version 1.1

1.1

1.1 -2010

-2010

1,General

1,General Description

Description

GSM FWT -88 4 8 is a GSM to Analog Converter (single port,insert 1 sim card only) , the device

can produce a FXS line to allow a regular phone to be connected and used just like a local

landline (PSTN) except your calls will go out the GSM network. This device can both receive and

make calls .

The main application is: Connecting the RJ-11 FXS line to connect Ordinary telephone set for

voice call, to connect PBX for call extentions, to connect billing systems for public phone use, to

connect VoIP gateway to realize VoIP call termination , to connect alarm system for security

purpose, etc. It is not a VOIP gateway , nor a GSM+VOIP gateway, It is a GSM Fixed Wireless

Terminal that p roduces a Analog FXS phone line .

Available

Available :

:

�GSM 900/1800Mhz dual band , employing Wavecom Q2303A, Q2403A ,Q2406A, P3203A,

Sim300W ,SIM500W module to make;

�GSM 900/1800/1900Mhz Tri-band, employing Sim300z module to make;

�GSM850/900/1800/1900Mhz Quadband , employing M10,SIM340Z module to make.

�

�Deatiled sub-models:

�

�1)Dual band: ET-8848 Q2303A , ET-8848 Q2403A , ET-8848 Q2406A, ET-8848 P3203A,

ET-8848 Sim300W , ET-8848 SIM500W.

�

�2) Tri- band: ET-8848 Sim300 Z.

�3) Quad band : ET-8848 M10, ET-8848 SIM340Z

Appearance

Appearance and

and

and Structure

Structure

Item GSM FWT-8848 Remark

Appearance White/black

Material ABS (Acrylonitrile Butadiene Styrene)

Dimension 170mm × 118mm × 30mm Excluding antenna

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

3

Weight 400g Weight of Main unit

Power Switch Rocker switch

Power Socket 12V DC input

Phone interface RJ11 2 RJ-11 ports

Antenna interface SMA-female

LED display

No.1: Power, No.2.in use, No.3, in talk, No.4,

Battery, if have, No. 5-7, Signal strength

From left to right (front

side view)

Front side

LEDs display for Signal strength , Power, Working

Status , Talking and Battery indicator;

Rear side

1 pcs SMA antenna connectors, 2 RJ-11

output, Power port and switch;

Bottom side

1 pcs Sim card holder slots, you can insert Sim

card into the slot .

2,Fe

2,Fe atures:

atures:

1) It is a 1 channel GSM Gateway which has 2 RJ-11 outputs for extensions;

2) It can connect with ordinary tele phone set, PBX , VOIP Gateway, Billing meter etc. ;

3) Dialing tone frequency:450hz ;

4) Employ Industrial module to make ;

5) Can adjust dial interval from 0.5sec to 9 secs by setting up from telephone set ;

6) Can adjust voice volume by setting up from telephone set ;

7) SIM card supported (1.8V, 3V) ;

8) Caller ID display ;

9) DTMF Dialing ;

10) Bell signal ;

11) Polarity reversal ;

12) The RJ-11 socket which connect the phone or billing system for metering purpose ;

13) Antenna socket (SMA) ;

14) IP Presetting ;

15) Working status and Signal Strength by LED indicator ;

16) IMEI Change (optional) .

17) back up Li-ion battery( Optional) 7.2V 1300mAh.standby 24hrs,talking time: 2.5hrs.

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

4

3,

3, Technical

Technical

Technical Specifications

Specifications

Air interface standard: GSM850/1900Mhz,900/1,800Mhz phase 2+ full band

Frequency ranges:

A) GSM 850 GSM 1900:

I) Transmission: 869.2 ~ 893.8MHz I) Transmission: 1, 930 ~ 1, 990MHz

Ii) Reception: 824.2 ~ 848.2MHz Ii) Reception: 1, 850 ~ 1, 910MHz

B) GSM 900: GSM 1800:

I) Transmission: 890 ~ 915MHz I) Transmission: 1, 710 ~ 1, 785MHz

Ii) Reception: 935 ~ 960MHz Ii) Reception: 1, 805 ~ 1, 880MHz

Phone interface: supply RJ-11 Phone Interface

Hanging voltage: 45V

Picking off voltage: 30mA / 41mA

Dialing tone Frequency: 450Hz

Antenna interface: Antenna amplifying> 2 .5db

Sensitivity:<-104DBM

Transmitting power<3W

Color: White /Black (optional)

AC- Adapter interface: I nput : AC 110 ~2 4 0V AC 50~60Hz

O utput : 12DC 1A.

AC-Adapter type: EU,US,AU,British can be optional

4,

4, Operation

Operation

Operation Circumstance:

Circumstance:

Operation temperature: -10c~60C

Storage temperature:-20C~70C

Operation humidity:45%-95%

Atmosphere pressure:86-106Kpa

Environment noise: <60DB

Transmitting Power:2W

Sensitivity: <-104dbm

Antenna Amplifying: > 2 .5db

Dialing frequency: 450Hz

Hanging voltage: 45V

Picking current: 30mA/41mA

5,

5, Packing

Packing

Packing List

List

Name Quantity Remark

GSM FWT-8848 1pcs Dual band or Quadband

Ac- adapter 1pcs AC-110-240V, DC12V/1A

Antenna 1pcs Magnetic Antenna with 3m

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

5

cable

User 's Manual 1pcs English

G .W: 0.75 kg per unit. 20pcs /CTN , 16kg /CTN,CTN Size: 55cmX34.5cmX32.5cm

6,Installation

6,Installation And

And

And Connection

Connection

The

The Condition

Condition

Condition for

for

for Installation

Installation

The terminal asks for 110- 220V

AV

power supply. It must be installed in the area where the

GSM network can cover. The strength of the signal can affect the quality of voice.

1. Screw off the screws that are on the back of the terminal, Insert SIM card for every Sim card

holder, and then tighten the screws.

2. Install antenna. In order to ensure the quality of voice, antenna must be put beyond 1.5 from

the telephone and terminal.

3. On end of the telephone line connects to the “ Phone ” port of the terminal, the other end

connects to telephone.

4. “ Power ” port connects to power adapter that is connected to 110-220V AC power supply.

1)

1) The

The

The Installation

Installation

Installation for

for

for Connecting

Connecting

Connecting to

to

to Ordinary

Ordinary

Ordinary Telephone

Telephone

The Sketch for connecting ordinary Telephone

Draw

Draw your

your

your attention:

attention:

attention: Because there are many types of ordinary telephone and their electric

parameters are different. In order to avoid mutual disturbance between telephone and terminal

and affect voice quality. The distance between telephone and terminal is 1.5m at least.

2)

2) The

The

The installation

installation

installation for

for

for connecting

connecting

connecting to

to

to billing

billing

billing device

device

device for

for

for metering

metering

If the users demand to register cost during calls, billing device can be connected between

terminal and ordinary telephone. Billing device register cost according to the anti-polarity signal

that is provided by terminal.

The sketch for connecting to Billing device or Computer charging system

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

6

3)

3) The

The

The installation

installation

installation for

for

for connecting

connecting

connecting to

to

to PBX

PBX

PBX for

for

for call

call

call extentions

extentions

If users want to connect small PBX to this terminal, connect terminal ’ s “ Phone port ” to the PBX.

The sketch for connecting to PBX device.

4)

4) The

The

The installation

installation

installation for

for

for connecting

connecting

connecting VoIP

VoIP

VoIP gateway

gateway

gateway for

for

for Call

Call

Call Termination

Termination

Suppose a VoIP call originates from US, which was transferred from US Server to China Server

on

VoIP,

finally the call will be terminated from internet to GSM network and to be sent out to the

destination answer side.

The sketch for connecting to VoIP gateway

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

7

5)

5) The

The

The installation

installation

installation for

for

for connecting

connecting

connecting to

to

to alarm

alarm

alarm system

system

system for

for

for Security

Security

The GSM FWT can substitute the PSTN for connecting to alarm system for security purpose

when PSTN failure or not available.

The sketch for connecting to alarm system

7,

7, Function

Function

Function Setting

Setting

Before you do the following function settings, Lift handset or press hands free key of telephone

set, then you can press the buttons according to the following instructions to finish setting, you

will hear 2 beeps when you finish, this testify set ting successfully.

1

1 )

)

) Restore

Restore

Restore to

to

to factory

factory

factory default

default

default setting

setting

*#99#99# restore to factory default setting.

2

2 )

)

) Adjust

Adjust

Adjust dial

dial

dial interval

interval

*#01#30# , 01--command ，30--time ，Max 9.9 seconds ，Min 0.5 seconds, default setting is 3

seconds.

*If you use GSM FWT -8848 for connecting to VoIP gateway, you can set dial interval as 0.5

second, it can make PDD<5 sec (Method: *#01#05#);

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

8

*If you use GSM FWT- 8848 for connecting telephone, PBX, billing device, you can set dial

interval as 3 seconds or 5 seconds as you like (Method: *#01#30#, set the dial interval as 3

seconds).

3

3 )

)

) Adjust

Adjust

Adjust Earphone

Earphone

Earphone Volume

Volume

*#02#15# 02--command ，15--volume ，Max 16 ，Min 1, default setting is 15.

4

4 )

)

) Adjust

Adjust

Adjust Mic.

Mic.

Mic. Volume

Volume

Volume (sensitivity)

(sensitivity)

*#03#10# 03--command ，10-- amount ，Max 16 ，Min 1, default setting is 10.

5

5 )

)

) Setting

Setting

Setting local

local

local area

area

area code

code

*#04#*0755# 10--command ，*0755 — area code ，Max 5 numbers, use "*" instead if area code

is less than 5 digits.

6

6 )

)

) Setting

Setting

Setting IP

IP

IP numbers

numbers

*#05#17911# 05--command ，17911 — IP numbers ，Max 5 numbers, use "*" instead if IP number

is less than 5 digit.

7

7）Hide

Hide

Hide Caller

Caller

Caller ID

ID

ID (been

(been

(been sent

sent

sent out)

out)

out) Setting

Setting

*#13#01# 13-- command ，01--value ，Max-02 ，Min-00 Default setting is 00

0 0 -- presentation indicator is used according to the subscription of the CLIR service

0 1 – CLIR allowed

0 2 – CLIR prohibited

Notice: This Setting need GSM carrier support.

8)

8) Bar

Bar

Bar incoming

incoming

incoming call

call

call Setting

Setting

*#14#00# 14-- command ，00-- value ，00-- no barring, 01-- set barring default setting -- 00

9)

9) FSK

FSK

FSK setting

setting

setting (optional)

(optional)

(optional) (should

(should

(should confirm

confirm

confirm before

before

before order)

order)

*#17#00# setting caller ID

17-order, 00-value, 00-DTMF, 01-FSK, default setting is 00

T his setting need terminal has FSK Chip set support

10

10 )

)

) Billing

Billing

Billing Mode

Mode

Mode setting

setting

*#15#00#

15- -command , 00-value, 01-reversal polarity, 02-12 KHz , 03-16 KHz , default setting-- 01

11

11 ）IMEI

IMEI

IMEI change

change

change Setting

Setting

Setting (

(

( for

for

for Quad

Quad

Quad Band

Band

Band M10

M10

M10 and

and

and SIM540W

SIM540W

SIM540W modules

modules

modules only)

only)

1. Write IMEI to RAM

*#18# IMEI no. #, 18- -command , IMEI No . --15-digits/numbers IMEI no.

2. Check IMEI, if it is right, and then write it to module.

*#19# IMEI no. #, 19- -command , IMEI No. -- 15 - digit s/numbers IMEI No.

Notice: Step 1 and Step 2, IMEI no. must be same.

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

9

12)

12) Pin

Pin Lock

Lock

Lock &Network

&Network

&Network Lock

Lock

Lock Setting

Setting

Setting (optional)(Should

(optional)(Should

(optional)(Should confirm

confirm

confirm before

before

before order)

order)

2) PIN Lock

1,

1, Set

Set

Set to

to

to open

open

open PIN

PIN code

code

code check

check

check and

and

and automatic

automatic

automatic PIN

PIN lock

lock

lock function

function

*#07#*1234#

*#07#*1234# 07-command, 1234- the current SIM card PIN code

If set sucessfully, the device will open PIN code check, and automatically change the current

SIM Card into "PIN on" from "PIN off"

2,

2, Set

Set

Set to

to

to close

close

close PIN

PIN code

code

code check

check

check and

and

and auomatic

auomatic

auomatic PIN

PIN lock

lock

lock function

function

*#08#*1234#

*#08#*1234# 08-command, 1234- the current SIM card PIN code

If set sucessfully, the device will close PIN code check and automatic PIN lock function.

3,

3, Set

Set

Set to

to

to change

change

change PIN

PIN code,open

code,open

code,open automatic

automatic

automatic PIN

PIN lock

lock

lock function

function

*#09#1234*56785678#

*#09#1234*56785678# 09-command, 1234- the current sim card PIN code, 5678-new PIN code.

(5678 can be any other 4 digits number, suppose you can use 2009).

If set successfully, the device will change the current sim card PIN code as you want.5678, or

the any other 4 digit PIN codes, and open automatic PIN lock function.

2)Network Lock

1,Set

1,Set to

to

to open

open

open Network

Network

Network lock

lock

lock function

function

*#10#01234#

*#10#01234# 10-command, 01234-password

2,Set

2,Set to

to

to close

close

close Network

Network

Network lock

lock

lock function

function

*#11#01234#

*#11#01234# 11-command,01234-password

3,Set

3,Set the

the

the Network

Network

Network codes

codes

*#12#1*46003*46003#

*#12#1*46003*46003# 12-command,1--No. Of IMSI, 46003--the IMSI code for China Telecom

*#12#2*46000*46000#

*#12#2*46000*46000# 12-command, 2--No. Of IMSI, 46000--the IMSI code for China Mobile

8,Making

8,Making Calls

Calls

Calls and

and

and Answer

Answer

Answer Incoming

Incoming

Incoming Calls

Calls

Making

Making Calls

Calls

1. Lift the handset or press “ hand-free ” key, you will hear dialing tone, then you can dial the

telephone numbers you want to call.

2. Dialing: dialing the telephone numbers you want to call

3. On completion of dialed digits, you can press “ # ” to transmit the called telephone

numbers. If you don ’ t dial any key for continual 3 seconds during the dialing, terminal

transmits called telephone numbers automatically.

4. During calls, if the telephone numbers is not free ones, the terminal sends out

anti-polarity signal.

5. If the calling party or called party hangs up, the terminal stops sending out anti-polarity

signal.

Answering

Answering Incoming

Incoming

Incoming Calls

Calls

When some calls are coming in, if the connected telephone has the function of displaying

incoming calls, the telephone rings and displays the incoming telephone numbers. Now

users can lift the handset or press “ hand-free ” to answer it.

ETROSS

ETROSS TELECOM

TELECOM

TELECOM (HONGKONG)

(HONGKONG)

(HONGKONG) LIMITED

LIMITED

10

Warranty

Warranty Card

Card

Please fill in the blanks carefully, and keep it properly as the voucher for warranty.

Type of Equipment ET-8848

User

’

s name Contact with:

Contact Tel.no.

Address

Date of Ex-works

Date of Maintenance Damage Management Maintainer

Sales Agent

(Stamp)

Purchasing Date

Estross ET-8848 User manual

Popular Gateway manuals by other brands