Huawei HG659 User manual

HG659 Home Gateway
User Guide
HUAWEI TECHNOLOGIES CO., LTD.

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Ports and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Selecting an Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the HG659 on a DSL Broadband Network. . . . . . . . . . . . . . . . . . . . . . . .
Installing the HG659 on an Ethernet Broadband Network . . . . . . . . . . . . . . . . . . .
Powering On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Network Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting the Computer IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Logging In to the Web Management Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Network Access Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Enabling and Disabling the WLAN on the HG659. . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Up a Wireless Connection Using the WPS Button . . . . . . . . . . . . . . . . . . .
Manually Setting Up a Wireless Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Your WLAN Name and Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parent Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Controlling Computer Internet Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filtering Out Inappropriate Websites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
USB Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a USB Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Samba Access Permission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing Data Using Samba. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sharing a USB Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Changing the Web Management Page User Name and Password . . . . . . . . . . .
Restoring Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Web Management Page IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Default Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Legal Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. . . . . . . . .
Trademarks and Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DISCLAIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Import and Export Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Privacy Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 Product Overview
Ports and Buttons
1
2
10
3
4
5 6
7
8
9
No.
Item
Description
1
WPS
Starts Wi-Fi protected setup (WPS) negotiation.
2
WLAN
Enables or disables the WLAN function.
3
On/Off
Powers the HG659 on or off.
4
Power
Connects to a power adapter.
Restores the HG659 to its default settings after you press and hold
5
Reset
this button for 6 seconds or more while the HG659 is powered on.
A reset will result in all custom data and settings being lost.
Use with caution.
6
DSL
Connects to a DSL filter or phone socket.
7
PHONE
Connects to a telephone.
8
LAN1 ～LAN4
Connects to Ethernet devices, such as computers, set-top boxes
(STBs), and switches.
9
WAN
Connects to an Ethernet device that provides Internet access,
such as a modem or switch.

No. Item Description
10
USB
Connects to a USB device.
If you connect a USB device to the HG659, verify that the 10 USB
input voltage and current of the USB device does not exceed 5 V/0.65
A. Otherwise, the HG659 may malfunction.
Indicators
Indicator
Status
Description
Power
Steady green
The HG659 is powered on.
Off
The HG659 is powered off.
Blinking green
A DSL connection is being activated.
WAN
Steady green
A DSL connection has been set up and activated.
A WAN connection has been set up.
Off
The WAN or DSL port is not connected.

Indicator
Status
Description
Steady green
The HG659 is connected to the Internet in router
mode, but no data is being transmitted.
Internet
Blinking green
The HG659 is connected to the Internet in router
mode, and data is being transmitted.
> The HG659 is in router mode, but not connected to
Off
the Internet.
> The HG659 is in bridge mode.
Steady green
The HG659 has WLAN enabled, but is not transmitting
data.
Fast Blinking
The HG659 has WLAN enabled, and data is being
WLAN
(2Hz)
transmitted.
Slow Flashing
The HG659 is attempting to connect to a wireless
client over the WLAN using the WPS function.
(1Hz)
This process lasts for no longer than 120 seconds.
Off
WLAN is disabled.
Steady green
The HG659 is registered with a SIP server, but no
data is being transmitted.
VoIP
Blinking green
The HG659 is registered with a SIP server, and data is
being transmitted.
Off
The HG659 is not registered with a SIP server.
The LAN port is connected to an Ethernet device
Steady green
(such as a computer) with a network cable, but no
data is being transmitted.
LAN1 ～LAN4
Blinking green
The LAN port is connected to an Ethernet device with
a network cable, and data is being transmitted.
Off
The LAN port is not connected to any Ethernet device.
Steady green
The USB port is connected to an USB device, but no
data is being transmitted.
USB
Blinking green
The USB port is connected to an USB device, and
data is being transmitted.
Off
The HG659 is not connected to any USB device.

2 Hardware Installation
Selecting an Installation Location
Place the HG659 on a well- ventilated even surface without exposure to direct sunlight. For the
best possible performance, take note of the following:
> Make sure there are no obstacles, such as concrete or wooden walls, between the
computer and HG659.
> Ensure that the computer and HG659 are far from electric appliances that generate
strong magnetic or electric fields, such as microwave ovens.
Installing the HG659 on a DSL Broadband Network
In some communities, Internet service providers use telephone lines to provide broadband access
services. If you have subscribed to digital subscriber line (DSL) broadband, you can connect the
HG659 to a telephone port for Internet access.
Connect your devices in the sequence indicated in the following figure.
9
1
2
6
7
8
a
b
c
3
6
4
4
5
1
Telephone wall jack
2
Power adapter
3
Splitter
4
Telephone
5
Set-top Box
6
Laptop computer
7
Desktop computer
8
Smart Phone
9
Pad
a
LINE port
b
MODEM port
c
PHONE port

When configuring the HG659 for the first time, use an Ethernet cable to connect the
HG659 to a computer.
Installing the HG659 on an Ethernet Broadband Network
In some communities, network service providers use Ethernet interfaces as Internet interfaces. On
this network, your PC is directly connected to the Internet through the Ethernet interface provided by
the network service provider.
If you have subscribed to digital Ethernet broadband, you can connect the HG659 to an
Ethernet interface for Internet access.
Connect your devices in the sequence indicated in the following figure.
6
1
7
4
8
5
2
3
1
Power adapter
2
Telephone
3
Set-top Box
4
Network interface on the
5
Desktop computer
6
Pad
wall
7
Smart Phone
8
Laptop computer
Powering On
To power on the HG659, press its power button.
After the HG659 is powered on, the HG659 indicator turns on.If the indicators do not behave
as expected, ensure that everything is plugged in correctly.

3 Setting Network Parameters
Logging In to the Web Management Page
The HG659 provides an intuitive web management page where you can view or set the HG659
parameters.
Before you log in to the HG659 web management page, ensure that the computer used
for the login is connected to the HG659 and has been configured to automatically obtain
an IP address or assigned with a static IP address.
1. Open a browser. In the address box, enter 192.168.1.1. Press Enter.
2. Enter the login user name (vodafone by default) and password (vodafone by default). Click
Login.
4 Setting Up Wireless Connection
Enabling and Disabling the WLAN on the HG659
The default SSID and WLAN Key printed on the HG659's rear panel are unique and secure.
If you do not want to change them, just turn the WLAN switch on.
Press the WLAN button in the HG659 to enable or disable the WLAN. To ascertain whether the
WLAN is enabled, view the WLAN indicator.
Setting Up a Wireless Connection Using the WPS Button
Push the WPS button once to quickly set up a wireless connection between the HG659 and any
WPS-capable device.
Before you set up a wireless connection using the WPS button, verify the following:
> The wireless network security mode of the HG659 is WPA2-PSK or WPA-PSK/WPA2–PSK.
> The wireless device (laptop, tablet, or mobile phone) to connect to the HG659 is
WPS-capable.
1. Press the WPS button on the wireless device to start WPS negotiation. For details, see
the user guide for the wireless device.
2. Within 2 minutes, press and hold the WPS button on the HG659 for 1 second or more.
The WPS button indicator blinks.
When the WPS button indicator on the HG659 is steady on, a connection between the HG659
and wireless device is set up. The WPS button indicator is on for 300 seconds.
Manually Setting Up a Wireless Connection
The wireless configuration software provided by Windows is used as an example to describe how
to set up a wireless connection.
You can also use the tool built into the network adapter to set up a wireless connection.
For details, see the network adapter's user guide.
Before setting up a wireless connection, record the WLAN name and password of the HG659.

The default WLAN name and password are printed on the HG659 cover label.
On Windows 7
1. Choose Start > Control Panel > Network and Internet > Network and Sharing
Center > Change adapter settings. Right-click Wireless Network Connection, and
select Connect/Disconnect.
2. From the wireless network list, select the WLAN provided by the HG659. Click Connect.
3. In the displayed dialog box, enter the WLAN password and click OK.
In the wireless network list, check the WLAN connection status. If the status is Connected, the
computer is wirelessly connected to the HG659.
On Windows XP
1. Choose Start > Control Panel > Network and Internet Connections > Network
Connections. Right-click Wireless Network Connection and choose View
Available Wireless Networks from the shortcut menu.
2. From the wireless network list, select the WLAN provided by the HG659. Click Connect.
3. In the displayed dialog box, enter the WLAN password and click Connect.
4. In the wireless network list, check the WLAN connection status. If the status is
Connected, the computer is wirelessly connected to the HG659.
Changing Your WLAN Name and Password
WLAN access requires the WLAN name and password. To improve your WLAN security, regularly
change your WLAN name and password.
1. Log in to the web management page.
2. In the navigation tree, choose Home Network > WLAN Settings.
3. On the Basic Settings page, enable your 2.4 GHz or 5 GHz WLAN, and click Save.
4. On the WLAN Encryption page, enter your desired WLAN SSID and Key, and click Save.

5 Parent Control
Controlling Computer Internet Access
Your HG659 provides time control function. With this function, you can set limits on the duration of
Internet usage. you can confine Internet access to specific computers or deprive specific computers
of Internet access.
1. Log in to the web management page.
2. In the navigation tree, choose Internet > Parental Control > Time Rules.
3. Click New time rule.
4. In Rule name, enter a new rule name you specified.
5. In Time allowed, set the time range that allowed to access the Internet.
6. Select the device you want to control.
7. Click Save.
Filtering Out Inappropriate Websites
Use URL filtering to prevent certain websites from being accessed.
1. Log in to the web management page.
2. In the navigation tree, choose Internet > Parental Control > URL Fliter.
4. Click New URL fliter.
5. In URL, enter the website address you specified.
6. Select Manage devices manually, and select the device you want to apply to.
7. Click Save.

6 USB Device
USB Storage Device
USB storage devices use their USB ports to exchange data with other devices.
You can connect a USB storage device to your HG659 and access the USB device from
your computer.
Both the USB drive and removable hard disk can connect to your HG659.
Your HG659 supports the following file systems for reading and writing.
> FAT32/FAT
> NTFS
Connecting a USB Device
After you connect a USB device to your HG659, computers or other devices connected to the
HG659 network can access and share the data in or applications provided by the USB device.
If you connect a USB device to the HG659, verify that the input voltage and current of
the USB device does not exceed 5 V/0.65 A. Otherwise, the HG659 may malfunction.
You can connect the following USB devices to your HG659:
> USB storage device
> USB printer

Setting the FTP Access Permission
To avoid unauthorized access to the USB storage device, you can set the FTP access permission
on your HG659. This allows only authorized users to access the USB storage device.
Accessing to FTP Server Through the User Name and Password
1. Connect the portable storage device to the HG659's USB port.
2. Enable the FTP server.
a) Log in to the web management page.
b) ChooseShare > Storage Share.
c) In Service Settings, select Enable FTP for FTP server.
d) Click Save to save the settings.
3. Set the user name and password of the portable storage device.
a) In Username and Password, enter a user name and password for the FTP server,
and re-enter the password to confirm it.
b) In Directory mode, choose a file sharing path.
c) In Privilege, select the desired right.
d) Click Save to save the settings.
Accessing to FTP server Anonymously
1. Connect the portable storage device to the HG659's USB port.
2. Enable the FTP server.
a) Log in to the web management page.
b) ChooseShare > Storage Share.
c) In Service Settings, select Enable FTP for FTP server.
d) Click Save to save the settings.
3. Enable anonymous users.
a) In FTP Anonymous Users, select Enable anonymous users.
b) In Directory mode, choose a file sharing path.
c) In Privilege, select the desired right.
d) Click Save to save the settings.
Accessing a USB Storage Device Using FTP
You can access a USB storage device through the FTP server.
To access a USB storage device using FTP, connect the USB storage device to your HG659 and
set the FTP login parameters.
1. Open a browser on your computer.
2. In the address box, enter ftp://192.168.1.1. Press Enter.

3. In the Login dialog box, enter the login user name and password your set in the HG659's
Storage Share page (Anonymous users select the anonymous directly). Click Login.
Once you pass the authentication, the directory of and files in the USB storage device will be displayed.
Setting the Samba Access Permission
To prevent unauthorized users from accessing data stored in USB devices, you can set the Samba
access permission for the HG659. After this permission is set, only authorized users can access
data stored in USB devices.
1. Connect the portable storage device to the HG659's USB port.
2. Enable the samba server.
a) Log in to the web management page.
b) ChooseShare > Storage Share.
c) In Service Settings, select Enable SAMBA for samba server.
d) Click Save to save the settings.
3. Set the user name and password of the portable storage device.
a) In Username and Password, enter a user name and password for the samba
server, and re-enter the password to confirm it.
b) In Directory mode, choose a file sharing path.
c) In Privilege, select the desired right.
d) Click Save to save the settings.
Accessing Data Using Samba
Using Samba, you can securely and easily access data stored in USB devices by accessing shared
network directories.
You have connected a USB device to the HG659 and set its access permission.
1. On your computer, open a browser.
2. Enter \\192.168.1.1 in the address box, and then press Enter.
If the access permission of the USB device is set, your identity will be authenticated. During the
authentication, follow the onscreen instructions. When the authentication is successful, you will be
able to access data stored in the USB device.
Sharing a USB Printer
HG659 supports USB printers. After you connect a USB printer to your HG659 through the USB
port, you can access the printer from the Internet or internal network.
1. Connect the USB cable of the printer to the USB port on the HG659.
2. Add a Network Printer.
On Windows 7
1. Choose Start >Devices and Printers.

2. Choose Add a printer.
3. Choose Add a network, wireless or Bluetooth printer.
4. Click The printer that I want isn't listed.
5. Choose Select a shared printer by name and enter the printer address http://
192.168.1.1:631/printers/myprinter in the text box. myprinter is the customized name of
the printer to add. Click Next.
6. Select the model of the printer you want or click Have Disk to manually install the
printer drive.
7. Click OK.
On Windows XP
1. Choose Start > Printers and Faxes.
2. Choose Add a printer.
3. In the Add Printer Wizard dialog box, click Next.
4. Choose A network printer, or a printer attached to another computer and click Next.
5. Choose Connect to a printer on the Internet or on a home or office network and
enter the printer's address http://192.168.1.1:631/printers/myprinter in the URL text
box. myprinter is the customized name of the printer to add. Click Next.
6. Select the model of the printer you want or click Have Disk to manually install the
printer drive. Click Next.
7. Determine whether to set the printer as the default printer. Click Next.
8. Click Finish.
After you complete the preceding settings, open the files you want to print on your computer. Then
you can choose the printer just installed to print your files.
7 Maintenance Guide
Changing the Web Management Page User Name and Password
The correct user name and password are required to log in to the web management page. Regular
changes to the web management page user name and password can effectively prevent
unauthorized users from logging in and modifying important parameters.
1. Log in to the web management page.
2. In the navigation tree, choose Maintain > Account Management.
3. Click Edit.
4. In New username, enter the new user name you specified.
5. In Current password, enter the currently used password.
6. In New password, enter the new password you specified. In Confirm password enter
the new password again.
7. Click Submit.
When modify password successfully, this page will jump to the login page, enter the new
user name and password to log in.
If you forget the password , you can press and hold the Reset button for 6 seconds or
more, then the user name and password of the Web management page will back to

factory value. This operation will make your own configuration data lost, please perform
this operation with caution.
Restoring Default Settings
Using the Configuration Tool
If the HG659 parameter settings were configured incorrectly, log in to the web management page to reload
the default configuration file and restore the user to its default settings. Perform this operation with caution.
After the user is restored to its default settings, all custom data and settings will be lost, and the
password will be restored to user.
1. Log in to the web management page.
2. In the navigation tree, choose Maintain > Device Management.
3. In Factory Restore, click Reset.
4. In the displayed dialog box, click OK.
Using the Reset Button
If you forget the login password to the web management page or could not access the web
management page, use the Reset button on the HG659 rear panel to restore the HG659 to its
default settings. Perform this operation with caution. After the HG659 is restored to its default
settings, all custom data and settings will be lost, and the password will be restored to user.
1. Press the HG659 power button to power the HG659 on.
2. Press and hold the Reset button for 6 seconds or more.
The HG659 will restart, which will cause temporary network interruptions.
After the HG659 is restored to its default settings, change the computer IP address so that
it is in the same network segment as the 192.168.1.1 default IP address.
Changing the Web Management Page IP
To make the login IP address easy to remember or from avoiding the IP address of the router
conflict with other device in your home, you can change the IP address of the router after logging in
to the web management page.
1. Log in to the web management page.
2. Choose Home Network > LAN interface.
3. Click LAN Interface Settings.
4. In IP address, enter the new IP address you specified.
5. Click Save.
6. In the displayed dialog box, click OK.
After you change the IP address successfully, enter the new IP address for logging in.

8 Appendix
Technical Specifications
Item
Specifications
Power supply
12 V DC, 2 A
Power consumption
< 24 W
Ambient operating
0°C to 40°C
temperature
Ambient humidity
5% to 95% RH (non-condensing)
Dimensions (H x W x D)
185 mm x 37 mm x 240 mm, exclude the installer
Weight
< 350 g
VDSL standard
ITU G.993.2 (G.dmt) Annex B
8a, 8b, 8c, 8d, 12a, 12b, 17a
ITU G.992.1 (G.dmt)
ADSL standard
ITU G.992.2 (G.lite)
ITU G.994.1 (G.hs)
DSL standard
ANSI T1.413 Issue 2
ADSL2 standard
ITU G.992.3 (G.dmt.bis) Annex L
ADSL2+ standard
ITU G.992.5 (G.dmt.bitplus) Annex M
802.11b, 802.11g, 802.11n (2.4 GHz) and
WLAN standard
802.11ac (5 GHz)
802.11b
Up to 11 Mbit/s
802.11g
Up to 54 Mbit/s
802.11n (2T2R
Wireless transmission rate
Up to 300 Mbit/s
technology)
802.11ac (3T3R
antenna
Up to 1.3 Gbit/s
technology)

Default Settings
Parameter
Default Value
LAN port IP address
192.168.1.1
LAN port subnet mask
255.255.255.0
User name to log in to the web
user
configuration page
Password to log in to the web
user
configuration page
WLAN name
Labeled on the product cover
WLAN password
Labeled on the product cover
Dynamic Host Configuration
Enabled
Protocol (DHCP) server
WLAN
Enabled

9 Legal Notice
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without
prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei").
The product described in this manual may include copyrighted software of Huawei and possible
licensors. Customers shall not in any manner reproduce, distribute, modify, decompile,
disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software,
unless such restrictions are prohibited by applicable laws or such actions are approved by
respective copyright holders.
Trademarks and Permissions
Ltd.
,
, and
are trademarks or registered trademarks of Huawei Technologies Co.,
Other trademarks, product, service and company names mentioned may be the property of
their respective owners.
Notice
Some features of the product and its accessories described herein rely on the software installed,
capacities and settings of local network, and therefore may not be activated or may be limited by
local network operators or network service providers.
Thus, the descriptions herein may not exactly match the product or its accessories which
you purchase.
Huawei reserves the right to change or modify any information or specifications contained in
this manual without prior notice and without any liability.
DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE
ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF
PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS
REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL
INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING
FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE
AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.

Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and be responsible
to obtain all necessary governmental permits and licenses in order to export, re-export or import the
product mentioned in this manual including the software and technical data therein.
Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at
http:/ /consumer.huawei.com/en/privacy-policy/index.htm.