EUFY B09CKZNHJL User manual
3 EN EN 4
1IMPORTANT SAFETY
INFORMATION
●Your dog must be at least 6 months old to use this product.
●Never use this product to reduce or stop aggressive behavior. Consult a professional
trainer instead.
●Wearing a collar that is too tight or for a long time (more than 12 hours a day) might
damage your dog's skin.
2PRODUCT
OVERVIEW
❶ ❷❸❹
❷❸❹❺❻❼❽❾❿
❶❷❸❹LED IndicatorPower Button: ●Press and hold for 1 second to power on. ● Press and hold for 3 seconds to power o. Contact PointsCharging Port (with cover)❶❺❻❼❷❸❹❶❷❸❹❺❻❼Display: Shows dog channel, shock level, and battery level.Beep ButtonVibration ButtonShock ButtonMode Switch Beep, vibrate, and shock Beep and vibrate Power oShock Level + / -Dog Channel Switch
5 EN EN 6
3CHARGING
Charge the collar for 4 hours before first use:
LED Indicator Description
Blue Fully charged / Tone or vibration button pressed.
Red Charging / Shock button pressed / Powering off.
Flashing blue Working properly.
Flashing red Low battery.
Off Sleep mode / Powered off.
Charge the remote controller:
4WEARING COLLAR
FOR YOUR DOG
Collar Colors Dog Channel
Blue and purple 1
Orange (for E7250) 2
Make sure both contact points
properly contact the neck. Use
the provided long contact points if
necessary.
7 EN EN 8
5TRAINING
YOUR DOG
Find an appropriate shock level.
● Always start with the lowest level.
●The appropriate shock level can be found when your dog responds to the shock
with a mild reaction, such as tensing the muscles in the neck.
●The shock level also varies depending on the trainings you deliver. For a training
that requires high concentrations, your dog might need a shock of higher level.
Button Mode Switch When Pressed
The collar plays a beep sound.
The collar vibrates.
*The vibration will stop automatically if you
hold the button for more than 10 seconds.
The collar delivers an electric shock to the dog,
ranging from level 1 to 16.
*The electric shock will stop automatically if
you hold the button for more than 10 seconds.
or
6NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. (4) Consult the dealer or an
experienced radio / TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to
maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
or
or
9 EN EN 10
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. The device can be used in portable exposure condition without restriction.
Déclaration d'exposition aux rayonnements :
Cet équipement est conforme aux limites d'exposition aux rayonnements IC définies pour
un environnement non contrôlé. L'appareil peut être utilisé dans des conditions d'exposition
portable sans restriction.
CUSTOMER SERVICE
Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
Email Us
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial
Table of contents
Other EUFY Pet Care Product manuals
