EUROCOM 2700-C User manual

Notice
The company reserves the right to revise this publication or to change its contents without notice.
Information contained herein is for reference only and does not constitute a commitment on the part
of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any
errors or inaccuracies that may appear in this publication nor are they in anyway responsible for
any loss or damage resulting from the use (or misuse) of this publication.
This publication and any accompanying software may not, in whole or in part, be reproduced, trans-
lated, transmitted or reduced to any machine readable form without prior consent from the vendor,
manufacturer or creators of this publication, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or regis-
tered trademarks of their respective companies. They are mentioned for identification purposes only
and are not intended as an endorsement of that product or its manufacturer.
©December, 2000

Trademarks
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home or other limited viewing uses only unless otherwise autho-
rized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Intel and Pentium are registered trademarks of Intel Corporation.
MS-DOS, Windows, Windows 95, Windows Me, Windows 98, Windows 2000 and Windows
NT areregisteredtrademarksofMicrosoftCorporation.

Federal Communications Commission (FCC) Statement
ThisEquipmenthasbeentestedandfoundtocomply with the limits foraClassB digital device, pursuant to
Part15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interferencein a residentialinstallation. Thisequipment generates, uses andcan radiate radio frequency
energyand, ifnot installedandused inaccordance withtheinstructions, maycauseharmful interferenceto
radiocommunications. However,there isnoguarantee thatinterferencewill not occurin a particularinstal-
lation. Ifthis equipment doescauseharmful interference toradioor television reception,whichcan be
determinedby turningtheequipment offandon, theuseris encouraged totry to correctthe interference by
oneor more ofthe following measures:
- Reorientorrelocate the receivingantenna.
- Increasetheseparation between theequipment and receiver.
- Connect theequipment into anoutleton a circuitdifferentfrom that towhich the receiverisconnected.
- Consult thedealeror an experienced radio/TVtechnicianfor help.
Warning:
[ A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interfer-
enceto the nearby radio andtelevisionreception. It is essential that onlythesupplied power cord be used.
]
[Use only shieldedcablesto connect I/Odevicesto this equipment.]
Youare cautioned thatchangesor modifications notexpresslyapproved by thepartyresponsible for com-
pliancecould voidyour authoritytooperate theequipment.
[ ]: depend on EUT condition.

Safety Instructions
As with any other piece of precision electronic equipment, proper care and op-
eration of your notebook computer will prolong its use. Help your notebook
computer last longer by following the advice in this section:
Handling the Computer
Do not expose it to excessive heat or
direct sunlight. Do not expose your notebook com- puter to any shock or vibration.

Do not expose it to strong magnetic
fields. Do not leave it in a place where
foreign matter or moisture may
effect the system.
Do not turn off any peripheral
devices when the computer is on. Do not turn off the power until you properly shutdown all pro-
grams.

Do not place the computer on an
unstablesurface. Do not place the computer on any
surfacewhich will block the vents.
Don’t use or store the computer in
a humid environment.
Do not disassemble the computer
byyourself.

Do not place anything heavy on the
computer. When traveling by air, follow the
airline’sinstructionsforin-flight
use.
If there is an unusual odor, heat or
smoke coming from your computer,
unplug the cord.
Perform routine maintenance on
your computer.

Handling of the Power Cord & Battery
Do not plug in the power cord if you
arewet. Do not use the power cord if it is broken.
Do not place heavy objects on the
powercord. Do not touch the battery contacts
with your hands or any metal
objects.

Keep the battery away from
metalappliances. Affix tape to the battery contacts before diposing of the battery.
Use only approved brands of
peripheraldevices. Unplug the power cord before attachinganyperipheraldevices.
Handling Peripheral Devices