Eurotramp Minitramp Series User manual

1
Eurotramp - Trampoline Kurt Hack GmbH
Minitramp 112
(Art.-No. 50000; 50010; 50018; 50500 ; 50510; 50600 ; 50700)
Minitramp 125
(Art.-No. 60000; 60010; 60500; 60510)
Minitramp Open-End
(Art.-No. 45300; 45500; 45600)
Teamgym
(Art.-No. 60020; 60024)
Assembly instructions for Eurotramp - Minitramps

2
Eurotramp - Trampoline Kurt Hack GmbH
3
1
32
1 2
• To fold out the feet, place the trampoline vertically so that
both feet are free to move. Move the feet to the desired
position (Figure 1).
• The telescopic supports are each kept in tension by a
steel spring. By pulling the supports, they lock into the
respective sockets on the frame and the foot. (Figure 2
and 3).
• The dismount is done in the reverse order.
• To fold out the feet, place the trampoline vertically so that
both feet are free to move. Move the feet to the desired
position (Figure 1 and 2).
• The feet are being locked, by inserting the black bolts,
pulling them through the predrilled aperture in the at bar
(Figure 3).
• The dismount is done in the reverse order.
The height of the trampoline
can be adjusted with the star
grip.
The height of the trampoline
can be adjusted with the knob
bolt.
Assembly instructions for model types Minitramp 112 + 125
Assembly instructions for model types Minitramp Open-End

3
Eurotramp - Trampoline Kurt Hack GmbH
3
1
2
• To fold out the feet, place the trampoline vertically so that
feet both are free to move (Figure 1).
• Both feet are being locked, by inserting the black bolts,
pulling them through the predrilled aperture in the at bar
(Figure 2 and 3).
• The dismount is done in the reverse order.
The height of the trampoline
can be adjusted with the star
grip.
Assembly instructions for model types Teamgym
If you have any questions, contact us any time:
EurotrampTrampoline - Kurt Hack GmbH
Zeller Straße 17/1
73235 Weilheim
Tel. [phone] - 9495-0 | Fax [phone] - 9495-10
[email protected] | www.eurotramp.com
Assembly instructions fo Bumper on Minitramp Teamgym
Attention: Buying the Bumper is optional.
• The bumper is attached between the Minitramp frame and
the frame pad cover using the Velcro strip.
1