Eurotramp Trampoline Longe User manual

Use, Maintenance and Assembly Instructions
Trampoline Longe
Art. no. 34200 (Master)
Art. no. 34100 (Grand Master)

1
1
• 4 people are needed to assemble the Trampoline Longe.
• The trampoline should be ready for use before it is assembled.
• First insert the two angle pieces into the roller stand brackets and secure with washers
and T-screws. The angle pieces point towards the ground so that the other parts can be
mounted.
• Attach the extension pieces to the T-pieces. Now screw both supports to the two upper
connection parts using the ring screw.
• Before erecting the support structure, rst fasten two steel ropes to the underside
of the cross welded eyelet with a quick link for chains and also to the frame with the
corresponding clips. Fasten the two remaining steel ropes to the top of the eyelet.
• Fasten the single roller bracket to the right side of the inner eyelet and fasten the double
roller bracket to the left side accordingly.
• Now erect the support structure and fasten the two steel ropes to the opposite sides of
the frame.
• Move the T-pieces towards the angle pieces and lock in place. The T-piece must be
parallel to the frame.
• Adjust the support structure with turnbuckles.
• Fasten the somersault belt (not included in delivery) to the ends of the longe rope with
2 snap hooks. The exercise leader guides the gymnast with the longe rope sling that is
created.

1
2

1
3
Parts list
Description Quantity
Angle pieces 2
T-screws with washer 2
Extension pieces 2
Upper connection parts 2
Ring screw 1
Single roller or double roller bracket and longe rope 1
Steel wire ropes with eyelets and connecting clips 4
Snap hooks 2
Quick links for chains 4
Attention: Trampoline and twisting belt are not included in delivery!
If you have any further questions please do not hesitate to contact us:
Eurotramp-Trampoline Kurt Hack GmbH | Zeller Straße 17/1 | 73235 Weilheim/Teck
Tel.: [phone] - 94950
E-Mail: [e-mail]
www.eurotramp.com