Eurotronic Genius BLE100 Original operating instructions

Eurotronic Technology GmbH
Südweg 1 |36396 Steinau-Ulmbach |Germany
www.eurotronic.org
THE INGENIOUS ENERGY-SAVING
CONTROLLER
GENIUS
INSTALLATION &
OPERATION GUIDE
GENIUS BLE100

Page 2
GENIUS BLE100
TABLE OF CONTENTS
1. Scope of Delivery 3
2. Intended Use 4
3. Warning / Safety 4
4. Introduction GENIUS BLE 100 5
5. Controls and Display Elements 6
6. Installation and Start-Up 7
6.1 Inserting / Changing Batteries 7
6.2 Installation at the Radiator 8
6.3 Adapters 9
6.4 Adaptation 10
6.5 Disassembly 10
7. Temperature Setting 11
8. GENIUS App 11
8.1 Devices (App) 13
8.2 Temperature (App) 13
8.3 Heating Profile (App) 14
8.4 Holiday Function (App) 14
8.5 Settings (App) 15
8.6 Support (App) 15
9. Further Functions 16
10. Cleaning and Storage 16
11. Error Messages and Help 17
12. Technical Specifications 18
13. Suppor and Contact 18
14. Environmental Information 19
15. Warranty 19
The following operating instructions will guide you during commissioning and use of your GENIUS BLE 100 and answer
all essential questions. Please read these operating instructions carefully before using your GENIUS BLE 100.

Page 3
GENIUS BLE100
1. SCOPE OF DELIVERY
1x GENIUS BLE100
1x Quick Start Guide
3x Adapters (Danfoss RA / RAV / RAVL)
1x Screw for Adapter
2x AA LR6 batteries
EIN
GENIUS BLE 100
Energy-Saving Controller
Screw for Adapter * When using the RAV adapter, you need the
RAV Pin for the extension of the valve stem.
RAV
RA
RAVL
RAV Pin*
HINWEIS: The following figures are for illustrative purpose only and can differ from the real product.
NOTE: Please check the delivery scope for completeness.

Page 4
GENIUS BLE100
2. INTENDED USE
SAFETY INSTRUCTIONS
- GENIUS BLE100 is designed for use in buildings.
- Operate GENIUS BLE100 only as described in the user manual
- GENIUS BLE100 should only be put to use in a dry and dust-free place, away from direct sunlight.
- Do not keep using the device when ther is obvious damage.
- GENIUS BLE100 may not be rerebuilt, modified or opened
WARNING! RISK OF EXPLOSION!
Improper handling of batteries can lead to explosion.
- Do not heat batteries and do not throw batteries into an open fires.
- Do not place batteries in direct sunlight.
- Protect batteries from excessive heat.
- Do not short-circuit the batteries.
- Never attempt to charge non-rechargeable batteries.
- Never disassemble batteries.
- Do not use new and used batteries together.
- Observe the correct polarity (+/-) when inserting the batteries.
- Before inserting the batteries, clean the batteries and the contacts in the thermostat.
WARNING! RISK OF ACID BURNS!
Leaking battery acid can lead to burns.
- Avoid contact of battery acid with skin, eyes and mucous membranes.
- In case of contact with battery acid, rinse the affected areas immediately with plenty of clear water and consult a
doctor.
WARNING! RISK OF INJURY!
When children play with the thermostat or packaging, they might swallow small parts and suffocate.
- Do not let children play with the thermostat or packaging.
- Keep batteries away from children. Seek medical attention immediately if batteries are swallowed.
3. WARNING / SAFETY
The Genius BLE 100 is a programmable electric remote control thermostat for controlling radiators. Only operate the
device indoors. Any use other than that described in this operating manual is not intended and will result in exclusion of
warranty and liability. This also applies to conversions and/or modifications. Read the operating instructions carefully
and keep them in a safe place. Only pass the product on to third parties together with the operating instructions.

Page 5
GENIUS BLE100
4. INTRODUCTION GENIUS BLE100
Thank you for purchasing a product from Eurotronic Technology GmbH. This device is designed to adjust the tempera-
ture in your rooms comfortably and completely according to your needs while helping you to reduce your heating costs
effectively.
All development and production are 100% „Made in Germany“, guaranteeing the highest quality and technology stan-
dards. These operating instructions will help you to put your device into operation quickly and easily.
GENIUS BLE 100
The GENIUS BLE 100 energy-saving controller is an intelligent radiator controller for modern and simple operation,
which can be conveniently programmed and controlled via Bluetooth (from home) with the free app.
30%
Bis zu
Touch control
enables perfect control as well as simple
and clear operation.
Simple installation
without intervention in the heating system.
Save heating costs through
energy-efficient control.
APP Bluetooth
enables easy operation and control
via the free app.

Page 6
GENIUS BLE100
EIN
5. CONTROLS AND DISPLAY ELEMENTS
To enter the menu, press the MENU button. Use the PLUS/MINUS buttons to navigate through the menu.
In normal mode, you can set the temperature with PLUS and MINUS.
PLUS
Increase temperature /
navigate through menu
MINUS
Decrease temperature /
navigate through menu
MENU
Get to the menu
OK/SET
Confirm
Key Lock (S. 16)
Assembly/Disassembly (S. 10)
Window-open-detection (S. 16)
Battery level (S. 7)
LED-Bargraph:
Menu items / Functions
Manual Operation:
Use PLUS/MINUS to manually change the room temperature at any time. In AUTO mode, this manually set
temperature remains until the next setting point. GENIUS BLE100 then switches back to the set heating pro-
gramme.

Page 7
GENIUS BLE100
6. INSTALLATION AND START-UP
F
i
g
.
1
F
i
g
.
2
1. Remove the battery cover by pulling it upwards at the notch (Fig. 1).
2. Now insert the batteries. Pay attention to the correct polarity! Do not use rechargeable batteries.
3. Place the battery cover back on the GENIUS BLE 100 (Fig. 2) by pressing until it clicks.
The GENIUS BLE 100 is only in menu mode after you have inserted the batteries during initial commissioning and after
resetting to the factory settings. The menu item Assembly/Disassembly flashes.
- When the batteries are changed, this stage is skipped and the adaptation run is carried out automatically.
- The configuration is retained if the battery is changed later. Please note:
- The key lock is deactivated.
- The target temperature is set to 16°.
6.1 INSERTING/CHANGING BATTERIES
BATTERY:
If the batteries are weak, the battery LED
will flash continuously until the batteries are changed.

Page 8
GENIUS BLE100
INBETRIEBNAHME
GENIUS BLE 100 can easily be mounted on all known valve bodies (see adapter list at: https://eurotronic.org/service/
faq/).
1. Unscrew the old thermostatic head completely, loosen the fastening and pull it off the valve (Fig. 3)
2. If necessary, select a suitable adapter and mount it on the valve (Fig. 4)
3. Screw the thermostat onto the valve or adapter by turning the union nut clockwise (Fig.5).
CAUTION:
Make sure that the device is in the installation mode even if it is installed/removed later.
Only assemble/disassemble in this position.
6.2 INSTALLATION AT THE RADIATOR
F
i
g
.
4
F
i
g
.
3
F
i
g
.
5

Page 9
GENIUS BLE100
6.3 ADAPTERS
For the following valves no adapter is required:
Heimeier; Junkers Landys+Gyr; MNG; Honeywell; Braukmann, as these have a thread of M30x 1,5mm. The adapters
for Danfoss RAV (pin must be plugged on the valve tappet) Danfoss RA and Danfoss RAVL are included.
For the following valves you need an adapter:
Herz M28 x 1,5 mm; Comap M28 x 1,5 mm; Vaillant 30,5 mm; Oventrop M30 x 1,0 mm; Meges M38 x 1,5 mm; Ondal
M38 x 1,5 mm; Giacomini 22,6 mm; Rossweiner M33 x 2,0 mm; Markaryd M28 x 1,0 mm; Ista M32 x 1,0 mm; Vama
M28 x 1,0 mm; Pettinaroli M28 x 1,5 mm; T+A M28 x 1,5 mm; Gampper 1/2/6; Danfoss RA/RAV/RAVL.
For additional adapters, please visit: http://shop.eurotronic.org
If you are not sure which valve you have, please visit: www.eurotronic.org/service/faq/ and check the adapter list.
RAV RA RAVLRAV Pin
NOTE:
Remove the connectors of the plastic adapters completely (Fig. 6) before using one of the included adapters! For Dan-
foss RA/RAV, use the enclosed screw and nut.
Fig. 6

Page 10
GENIUS BLE100
6.5 DISASSEMBLY
To remove GENIUS BLE 100, press the MENU button on your controller. USE PLUS/MINUS
to navigate to the menu item for Assembly/Disassembly and confirm with OK/SET.
A running light is indicated by the LEDs. Wait briefly until the setting LED flashes.
Now turn the union nut counterclockwise and remove the GENIUS BLE 100
from the valve (Fig. 7).
F
i
g
.
7
After installation, GENIUS BLE 100 can start adapting. The LED for Assembly/Disassembly is already flashing,
confirm the adaptation by pressing and holding the OK/SET button (3 seconds). The adaptation starts after
confirmation. The device now adapts to the stroke of your valve body. To do this, the valve is now opened and closed
several times to learn the respective end points. A running light is indicated by the LEDs. After successful adaptation,
the GENIUS BLE 100 switches to normal operation and the LEDs indicate the setpoint temperature.
After approx. 5 seconds the thermostat switches to standby mode.
• If a new adaptation is necessary, e.g. if your radiator does not become cold in the OFF position, please select
Assembly/Disassembly in the menu. Confirm with OK/SET (3 seconds) and start the adaptation again
• When the Assembly/Disassembly LED flashes again, place the GENIUS BLE 100 on the radiator valve and then
briefly remove the batteries to reset.
6.4 ADAPTATION

Page 11
GENIUS BLE100
7. TEMPERATURE SETTING
All 6 LEDs on: > 28° = heating ON (valve fully open, no regulation)
LED 1 to 5 on, 6 flashes: 28°
LED 1 to 5 on: 26,5 °
LED 1 to 4 on, 5 flashes: 25°
LED 1 to 4 on: 23,5°
LED 1 to 3 on, 4 flashes: 22°
LED 1 to 3 on: 20,5°
LED 1 and 2 on, 3 flashes: 19°
LED 1 and 2 on: 17,5°
LED 1 on, 2 flashes: 16°
LED 1 on: 14,5
LED 1 flashes: 13°
no LED on: < 8°= heating OFF (anti-freeze function active)
The temperature can be set as desired using the PLUS and MINUS buttons. The temperature is always increased or
decreased in 1.5° steps.
EIN
8. GENIUS APP
To enable data exchange between the GENIUS BLE 100 and your smartphone or tablet, the following steps must be
followed:
• Make sure your smartphone has Bluetooth enabled (requires the availability of Bluetooth 4.2).
• Download the free Eurotronic GENIUS app from the Google Play Store or App Store. Alternatively, scan the QR code
with your smartphone.
When the app is installed, the operating system (Android) asks for permission to access the current location. This query
must be answered with „YES“ to avoid errors during the Bluetooth connection.
NOTE: The information „current location“ is not required by the Eurotronic Genius app, but by the operating system for
the Bluetooth connection.

Page 12
GENIUS BLE100
8. GENIUS APP
Create a new room or select
the room. You can create up to
12 rooms.
Press and hold to edit/rename
the already created room.
NOTES:
• The following description refers to the Android app as an example. Minor deviations may occur during operation of
the iOS app.
• Please always use the latest version of the app from the Google Play Store or App Store. Some descriptions in this
manual may differ with newer versions of the app.
• During operation, a Bluetooth connection must first be established to the device before an action can be performed.
You will therefore notice a delayed response to your controls.
Start the app.
NOTE: If you want to use several devices, put the devices into operation one after the other in order to be able to make
an unambiguous assignment of the devices.
Please select your device:
GENIUS BLE100.

Page 13
GENIUS BLE100
8.1 DEVICES (APP)
Once a room is created, your smartphone searches for
devices in your environment.
Add a thermostat to your room.
In the menu bar you can switch between the menu
items: temperature, heating profile, holiday and setting.
8.2 TEMPERATUR (APP)
With the setting wheel you can set your temperatures, which will
then be used for your heating profiles.
Determine the temperature with which the heating is to be carried
out during the heating times. To do this, select the „Comfort tempe-
rature“ button and set the temperature using the setting wheel.
Determine how far the temperature should be lowered during the
saving times. To do this, select the „Economy temperature“ button
and set the temperature using the setting wheel.
If the perceived temperature deviates from the set temperature, a
temperature adjustment from -5° to +5° is possible.
The setpoint temperature is maintained until the next change of
comfort or economy temperature, which is specified by the time
You can set your comfort temperature under the menu item „Temperature“.
NOTE: The device takes the date and time of your smartphone.
NOTE: When the batteries are changed, the target temperature is set to 16°.

Page 14
GENIUS BLE100
8.3 HEATING PROFILE (APP)
8.4 HOLIDAY FUNCTION (APP)
Select the time of your departure.
The menu item „Holiday“ allows you to create a holiday profile for the time of your absence.
Select the time of your return.
Determine the room temperature for the duration of your absence.
After you have created your holiday profile, you can transmit
your data.
Here you can create a
heating profile for the
each day.
In the menu item „Heating profile“ you can create individual heating profiles.
Here you can create
different heating profiles
for the weekdays and
weekends.
Here you can create an
individual heating profile
for the whole week.
After defining the heating
times, confirm with the check
mark.
Here you can transmit your
settings.
NOTE:
Make sure that the distance between the energy-saving controller and the mobile device is not exceeded when entering
new data. The communication distance may be shortened by the construction of the building or other obstacles.
After entering new heating times, confirm with the button „Transmit heating times“ that the old data will be overwritten.

Page 15
GENIUS BLE100
8.5 SETTINGS (APP)
Select the sensitivity of the temperature setting (high, medium,
low).
Under the menu item „Setting“ you can set the window-open-detection and activate the key lock.
By activating the child lock, manual operation on the controller
is blocked. Refer to paragraph 9 for how to unlock the key lock
manually.
Set the desired period of time for which the valve is to remain
closed.
8.6 SUPPORT (APP)
If you have any questions, please do not
hesitate to contact us by telephone.
If you have any questions, you can
send us an e-mail.
Leave the checkmark
ticked so that we can
identify your problem.
Back to the
overview.

Page 16
GENIUS BLE100
9. FURTHER FUNCTIONS
Window-open-detection: The GENIUS BLE100 automatically closes the heating valve to save energy if you open a
window and the temperature thereby drops significantly. If window-open detection is active, the window-open detec-
tion LED lights up. The LED lights up until the set time has elapsed and the thermostat returns to normal mode.
Key lock: Please select the menu item Key lock in the menu. To do this, use PLUS/MINUS to navigate through the menu
until the Key lock LED lights up. Now confirm with OK/SET. Manual operation on the controller is now disabled.
To unlock the key lock, press and hold the MENU and OK/SET buttons simultaneously for about 10 seconds.
NOTE:
While the key lock is active, the LED next to the key lock icon lights up when an attempt is made to make changes to
the thermostat.
When the key lock is unlocked, the Key Lock LED turns on and off briefly. The current temperature is then displayed
via the illuminated LEDs.
When the batteries are changed, the key lock is deactivated.
Anti-freeze and anti-scale function: The anti-freeze and anti-scale functions are automatically active.
Anti-freeze function: If the temperature drops below 8°C, GENIUS BLE 100 opens the valve until the temperature rises
above 8°C again. This prevents the radiators from freezing.
Anti-scale function: To prevent the radiator valves from scaling, GENIUS BLE 100 regularly carries out a scaling protec-
tion run.
Resetting: If you wish to reset the radiator controller to the factory settings, press and hold the PLUS/MINUS buttons
simultaneously for at least 10 seconds. A running light is indicated by the LEDs. After successful reset the LED for As-
sembly/Disassembly starts flashing.
The procedure is now the same as for initial commissioning. Now proceed as for the initial commissioning.
10. CLEANING AND STORAGE
RISK OF DAMAGE! Improper handling of the thermostat can lead to damage.
• Do not immerse the thermostat in water or other liquids.
• Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such
as knives, hard spatulas and the like. These can damage the surface.
• Clean the thermostat with a soft, dry cloth. Do not exert pressure on the display.
Switch off the device and remove the batteries if you will not be using the device for a long time. Store the device in a
dry, dust-free place.

Page 17
GENIUS BLE100
11. ERROR MESSAGES AND HELP
Error Cause Solution
The LED for battery flashes
continuously.
Battery low Insert new batteries.
Radiator does not warm up. Boiler water temperature OK? Valve
does not open after the summer
heating break - is it scaled?
Correct boiler water temperature, remove
GENIUS BLE 100. Move the valve tappet
back and forth several times by hand/tool.
Radiator does not get cold. Valve does not close completely. The
closing point of your valve seal may
have shifted.
Perform new adaptation (see „Adaptation“)
Move the valve tappet several times by hand
- adaptation may not be possible because
the valve may have scaled or the seal no
longer fulfils its function.
Thrust piece falls out. An endless thread can cause the
thrust piece located on the undersi-
de to fall out if the controller has not
been applied to the valve.
Insert thrust piece. Press the OK-button
or perform adaptation of the device by
removing and reinserting the batteries. The
endless thread now turns and tightens the
thrust piece again. Attach to radiator and
perform adaptation again.
The LED for Assembly/Dis-
assembly flashes.
Assembly error, no adaptation
possible
• GENIUS BLE 100 is not mounted
on the radiator
• Valve stroke too short
• no valve movement possible
Mount the device correctly on the radiator.
If required, use a suitable adapter from the
included accessories or other adapters from
our web shop at www.eurotronic.org.

Page 18
GENIUS BLE100
12. TECHNICAL SPECIFICATIONS
Name of device GENIUS BLE 100
EAN 4260012711271
Article Number 700071
Supply Voltage 2 x 1,5V LR6/Mignon/AA
Connection M30 x 1,5mm
Method of operation Type 1
Dimensions (w x h x d) 56 x 68 x 89 mm
Weight 149,7 g (incl. batteries)
Degree of protection IP20
Degree of pollution 2
Technical modifications are subject to change. All descriptions for compatibility are without engagement.
For technical support for the Eurotronic products, please contact Eurotronic via e-mail or telephone:
Customer Service: Eurotronic Technology GmbH
Südweg 1
36396 Steinau-Ulmbach
Germany
telephone: [phone]
e-mail: [e-mail]
13. SUPPORT AND CONTACT

Page 19
GENIUS BLE100
14. ENVIRONMENTAL INFORMATION
From the date of transposition of the European Directives 2012/19/EU into national law, the following shall apply:
Electrical and electronic devices as well as batteries must not be disposed of with household waste.
The consumer is legally obliged to return electrical and electronic equipment and batteries at the end of their
service life to the public collection points set up for this purpose or to the point of sale. Details are regulated by
the respective national law.
Batteries and rechargeable batteries must not be disposed of with household waste!
As a consumer, you are legally obliged to dispose of all batteries and rechargeable batteries, no matter whether
they contain harmful substances* or not, at a collection point in your municipality/city district or in the respecti-
ve stores, so that they can be disposed of in an environmentally friendly manner.
*labelled with: Cd = cadmium, Hg = mercury, Pb = lead
Dispose of Packaging:
Dispose of the packaging sorted by type. Add paperboard and cardboard to the waste paper, foils to the
recyclables collection. Dispose of the packaging sorted by type. Add paperboard and cardboard to the waste
paper, foils to the recyclables collection.
The symbols on the product, the instruction manual or the packaging refer to these regulations. By recycling, material
utilisation or other forms of utilisation of old devices/batteries, you make an important contribution to the protection of
our environment.
Konformitätserklärung:
Eurotronic Technology GmbH hereby declares that the GENIUS LED 100 radiator thermostat complies with all
applicable European Economic Area regulations of Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following Internet address: https://eurotronic.org/service/downloads.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Eurotronic Technology GmbH is under license. Other trademarks and trade names are those of
their respective owners.
The Apple Logo, iPad und iPhone are brands of Apple Inc., which are registered in the USA and other countries. App
Store is a service brand of of Apple Inc. Google Play, Android and other brands are brands of Google Inc.
®
The two-year warranty begins on the day of purchase. Please keep the receipt as evidence of purchase in the future.
During the guarantee period, defective radiator thermostats may be sent to the service address below. Please ensure
sufficient postage is paid.
A new or repaired device will then be sent to you free of charge. There is no new warranty period stargting when repai-
ring or replacing the device. Please note that we only grant warranty on the function of the device. We will not grant
warranty for the interaction between the thermostat and the bottom part of the valve. The technical data is only valid
for the use of the following valves: Heimeier, Junkers Landys+Gyr, MNG, Honeywell Braukmann (measure of thread
M30x1,5), Oventrop (M30x1,5) Danfoss RA, RAV und RAVL.
Please see the combinations of the devices on our website (www.eurotronic.org/service/faq/)
Following expiry of the warranty, you may still send the defective device to the address below for repairs. Please ensure
sufficient postage is paid. Repairs carried out after the guarantee are subject to a charce. Your legel rights are not affec-
ted by this guarantee.
15. WARRANTY

Eurotronic Technology GmbH
Südweg 1 | 36396 Steinau-Ulmbach | Germany
www.eurotronic.org
08/2019