Sitecom Home Energy Monitor Extension pack User manual

Installation guide
WLE-1100INT_QIG_20131127.indd 1-2 09-01-14 16:09

Package content
3x SmartPlugs
Sitecom and NET2GRID
Many energy suppliers offer a way to gain insights into your energy use.
We believe that you don’t have to be tied to a supplier to gain insights
into your energy use.
NET2GRID provides an easy solution to measure and monitor your home’s
energy consumption. That’s why we have partnered up with them.
home energy
monitor
3x SmartPlugs
Extension Pack
EN
WLE-1100INT_QIG_20131127.indd 3-4 09-01-14 16:09

SmartPlug LED
Smartplug Pairing
and On/Off button
SmartPlug
• Pairing mode: LED blinking red/green, ready to connect to smartbridge.
• Smartplug ON: LED is solid green / Smartplug OFF: LED is off .
Choose your
installation method
Option 1)
With the SmartBridge
Option 2)
With the Energy Insight app
Option 3)
With a web browser
EN
WLE-1100INT_QIG_20131127.indd 5-6 09-01-14 16:09

Install your
SmartPlugs with
the SmartBridge
1
Plug the SmartPlugs into a power socket.
OPTION
• Make sure to use power sockets close to the SmartBridge for installation.
• After successful installation you can move the SmartPlugs anywhere in your house.
1
EN
!Check if the SmartPlug LEDs are green.
If not press the button to turn on the SmartPlug.
WLE-1100INT_QIG_20131127.indd 7-8 09-01-14 16:09

Push the button on each of the three SmartPlugs for 5 seconds
until the LED starts to blink green and red.
2 3 Disconnect your SmartBridge from the wall socket.
press
5 sec.
press
5 sec.
press
5 sec.
EN
WLE-1100INT_QIG_20131127.indd 9-10 09-01-14 16:09

Plug the power adapter of your SmartBridge back into a wall socket.
4When the LED’s turn solid blue your SmartBridge is ready. 5
EN
WLE-1100INT_QIG_20131127.indd 11-12 09-01-14 16:09

Check that the LEDs of the SmartPlugs have turned solid green.
• Now you can move the SmartPlugs and plug in the devices you would like to measure.
6
EN
• The button can now be used to turn the plugs on and off .
WLE-1100INT_QIG_20131127.indd 13-14 09-01-14 16:09

Plug the SmartPlugs into a power socket.
• Make sure to use power sockets close to the SmartBridge for installation.
• After successful installation you can move the SmartPlugs anywhere in your house.
1
Install your
SmartPlugs with
the Energy Insight app
2
OPTION
EN
!Check if the SmartPlug LEDs are green.
If not press the button to turn on the SmartPlug.
WLE-1100INT_QIG_20131127.indd 15-16 09-01-14 16:09

Open the Energy Insight app on your smartphone.
3
Push the button on each of the SmartPlugs for 5 seconds until the
LED starts to blink green and red.
2
press
5 sec.
press
5 sec.
press
5 sec.
iOS Android
EN
WLE-1100INT_QIG_20131127.indd 17-18 09-01-14 16:09

Click“Scan”.
4While scanning, the SmartBridge will blink white. When the
LED’s turn solid blue your SmartBridge is ready.
5
iOS Android
EN
WLE-1100INT_QIG_20131127.indd 19-20 09-01-14 16:09

Check that the LEDs of the SmartPlugs have turned solid green.
6
• Now you can move the SmartPlugs and plug in the devices you would like to measure.
EN
• The button can now be used to turn the plugs on and off .
WLE-1100INT_QIG_20131127.indd 21-22 09-01-14 16:09

Plug the SmartPlugs into a power socket.
1
• Make sure to use power sockets close to the SmartBridge for installation.
• After successful installation you can move the SmartPlugs anywhere in your house.
With a web browser
3
OPTION
EN
!Check if the SmartPlug LEDs are green.
If not press the button to turn on the SmartPlug.
WLE-1100INT_QIG_20131127.indd 23-24 09-01-14 16:09

Open your web browser and go to http://smartbridge.local
3
Push the button on each of the SmartPlugs for 5 seconds until
the LED starts to blink green and red.
2
press
5 sec.
press
5 sec.
press
5 sec.
EN
WLE-1100INT_QIG_20131127.indd 25-26 09-01-14 16:09

Click“scan”.
4While scanning, the SmartBridge will blink white. When the
LED’s turn solid blue your SmartBridge is ready.
5
EN
WLE-1100INT_QIG_20131127.indd 27-28 09-01-14 16:09

Check that the LEDs of the SmartPlugs have turned solid green.
6
• Now you can move the SmartPlugs and plug in the devices you would like to measure.
EN
• The button can now be used to turn the plugs on and off .
WLE-1100INT_QIG_20131127.indd 29-30 09-01-14 16:09

Verpakkingsinhoud
3x SmartPlugs
Sitecom en NET2GRID
Veel energieleveranciers bieden je een manier om inzicht te krijgen in
je energieverbruik. Wij vinden echter dat je hiervoor niet gebonden
hoeft te zijn aan een leverancier.
NET2GRID biedt je een eenvoudige oplossing waarmee je het
energieverbruik van je woning kunt meten ongeacht je energie leve-
rancier. Daarom zijn wij een samenwerking met hen aangegaan.
home energy
monitor
3x SmartPlugs
Extension Pack
NL
WLE-1100INT_QIG_20131127.indd 31-32 09-01-14 16:09

SmartPlug LED
Smartplug Pairing
en Aan/Uit knop
SmartPlug
• Pairing mode: Kniperende LED (rood/groen). Klaar om te verbinden met SmartBridge.
• Smartplug AAN: LED is continu groen / Smartplug UIT: LED is uit.
Kies een
installatiemethode
Optie 1)
Via de SmartBridge
Optie 2)
Via de Energy Insight app
Optie 3)
Via de webbrowser
NL
WLE-1100INT_QIG_20131127.indd 33-34 09-01-14 16:09

Installeer de
SmartPlugs met
de SmartBridge
1
Plaats de SmartPlugs in een stopcontact.
OPTIE
• Tijdens de installatie is het handig om de SmartPlugs in een stopcontact
te plaatsen dicht bij de SmartBridge.
• Na een succesvolle installatie kan je de SmartPlugs verplaatsen.
1
NL
Controleer of de led op de SmartPlug groen brandt.
Als dit niet het geval is, druk op de knop om de SmartPlug aan te schakelen.
!
WLE-1100INT_QIG_20131127.indd 35-36 09-01-14 16:09

Druk op de knop op iedere SmartPlug voor 5 seconden totdat
de LED groen en rood brandt.
2 3 Haal de stroomadapter van de SmartBridge uit het stopcontact.
Druk
5 sec.
Druk
5 sec.
Druk
5 sec.
NL
WLE-1100INT_QIG_20131127.indd 37-38 09-01-14 16:09

Plaats de stroomadapter van de SmartBridge terug in het stopcontact.
4Wanneer de LED van de SmartBridge continue blauw brandt,
is deze klaar.
5
NL
WLE-1100INT_QIG_20131127.indd 39-40 09-01-14 16:09