Evergreen 01155 User manual

A
A
B
B
B
A
A
01155 Center Arbor DisplayAssembly Instructions
I. Parts and Accessories
II. Assembly nstructions
A. Metal Grid Side Panel (2pcs)
F. Metal Grid Side Panel (2pcs)
B. Metal Bar (2pcs)
D. Metal Bar (1pc)
C. Metal Garden Pole Bar (1pc)
E. Metal Mat Bar (1pc)
G. Top Metal Arch
(1pc)
H. Metal Base Circle
Feet (2pcs)
I. Headercard (1pc)
J. Metal Peg Bar (1pc) K. Metal Peg Bar (2pcs) L. Metal Peg for Regular
Flag (9pcs)
M. Metal Peg for
Garde Flag (18pcs)
N. Metal Peg (12pcs) O. Metal Peg (8pcs) P. U Shaped Metal
Hoops (2pcs)
T. Screw Driver (1pc)
Q. Bolt
(24pcs)
S. Bolt withR. Long Bolt
(4pcs) Hook (2pcs).
Please notes: Use R for secure side display 01156
& 01157 only.
1. Lay PartA parallel on floor, connect
PartB at the bottom of PartA as the
pictures shown here, and secure them
together by bolts provided.
2. Repeat step1, comeplete connet
partA and PartB.

A
A
A
A
A
Ｆ
Ｆ
ＦＦ
Ｉ
Ｈ
Ｈ
Ｇ
Ｆ
A
Ｆ
A
C
Ｄ
A
01155 Center Arbor DisplayAssembly Instructions
3. Connect PartC with PartA as
the pictures shown above, and
secure them together by bolts
provided.
4. Connect PartA with PartA
as the pictures shown here,
and secure them together by
bolts provided.
5. Connect PartF on top of
PartA as the pictures shown
here, and secure them together
by bolts provided.
6. Attach PartG on top of PartF
as the pictures shown here, and
secure them together by bolts
provided.
7. Attach PartI on top of PartF
as the pictures shown here, and
secure them together by bolts
provided.
8. Now you can leave the display standing by itself. Bolt
PartH onto the bottom of PartA as picture shown above.

Ｆ
Ｆ
J
J
L
K
K
K
Ｍ
Ｍ
Ｎ
Ｎ
Ｎ
Ｎ
K
Ｆ
ＦＦ
Ｅ
Ｆ
A
A
ＦＦ
o
o
o
PP
o
01155 Center Arbor DisplayAssembly Instructions
9. Attach PartE in between
PartF as the pictures shown
here, and secure them
together by bolts provided.
10. Attach PartJ and PartK on
PartF at the place you desire
on PartF.
11. Insert PartL into PartJ.
12. Insert PartM
into PartK.
13. Hang PartN onto outside of PartF at the
place you desire.
14. Hang
PartO and Part
onto outside
of the center
arbor display
at the place
you desire.
Now the center
arbor display
assembly is
complete.