Everpure SPA-400 User manual

SPA-400 Commercial grade drinking water system
for the home spa and bath
The same commercial quality that makes Everpure® the overwhelming choice for water filtration in restaurants is now available for your
entire home, including the home spa and bathroom. Everpure’s SPA-400 addresses the issues associated with water quality in the
bathroom by reducing unwanted lead, particulate and chemical impurities and retaining healthful minerals such as flouride, making it the
perfect water source for teeth brushing and a healthy mouth. The SPA-400 is designed to connect to your existing lavatory faucet, so
bringing the convenience of filtered water to your master bath, children’s or guest bathroom is easier than ever.
It’s water filtration you can trust
*As tested by Everpure, LLC
the pure solution
Our products polish water to premium quality so that water is sparkling and free
of unwanted tastes and odors. You’ll taste the difference in every sip you drink
and everytime you brush your teeth.
the sensible solution
Our filters reduce lead amounts in your water — below the Federal Action Level
of 10 ppb — as well as parasitic protozoan cysts and other microscopic
particles that may be in your water supply.
the convenient solution
The SPA-400 is easily installed using common household tools. This system
mounts under your sink and is plumbed to your standard lavatory faucet. And
cartridge replacement is easy, too — just like changing a light bulb.
the practical solution
At only pennies per gallon, this system is less expensive per glass than bottled
water or other drinking water systems and provides about a year’s supply of
water, depending on the size of your family and the amount of water you use.
The Everpure SPA-400 Drinking Water System for
the home spa and bath reduces the following
contaminants:
> Lead
> Cysts such as Giardia lamblia, Entamoeba histolytica and
Cryptosporidium parvum
And the following substances:
> Chlorine taste and odor
> Dirt and cloudiness*
> Mold and algae*
> Oxidized iron*
> Oxidized manganese*
> Oxidized sulfides*
> Particles 1/2 micron and larger in size
The SPA-400 delivers water at a 2.2 gal/min flow,
and brings the convenience of filtered water to
your home spa, master bath, children’s or guest
bathroom.
15

product specifications
Everpure, Micro-Pure and the silver canister color are registered trademarks of Everpure, LLC © 2008
®®
SPA-400Commercial grade drinking water system
for the home spa and bath
This drinking water system must be
maintained according to the
manufacturer's instructions, including
replacement of filter cartridges. The
substances reduced or removed by this
system are not necessarily in your water.
Read the performance data sheet.
flow rate
Controlled at 2.2 gal./min. (8.3 L/min.)
temperature
35-100 °F (2-38 °C) cold water use only
pressure
10-125 psi. (0.7-8.6 bar), non-shock
capacity
3,000 gal. (11,356 L)
everpure warranty
Everpure Drinking Water Systems are
warranted to be free of defects for a full
twelve (12) months after purchase. A
detailed warranty statement is provided
with each system.
SPA-400 System – Part No. EV9270-90
SPA-400 Cartridge – Part No. EV9270-91
Features:
> Finely polishes treated water to premium quality for drinking.
> Reduces chlorine taste and odor.
> Reduces dirt, rust, and other particulates such as oxidized iron, manganese, and sulfides.
> Reduces parasitic protozoan cysts such as Giardia, Entamoeba, and Cryptosporidium.
> Reduces common earthy, moldy, fishy tastes, and odors.
> Reduces lead to below the Federal Action Level.
General Installation/Operation/Maintenance Requirements:
> It is recommended that before purchasing a water treatment unit, you have your water tested to
determine your actual treatment needs.
> Space required: 5 x 5 x 20 in. (13 x 13 x 51 cm) including 2-1/2 inches of clear space under unit for
cartridge change.
> Install vertically with cartridge hanging down.
> Use minimum length of tubing possible.
> Flush new cartridge at full flow for three minutes to purge air.
> Replace cartridges when capacity is reached, or when flow becomes too slow, but at least annually.
> Do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system. Systems certified for cyst reduction may be used on
disinfected water that may contain filterable cysts.
> System comes complete with filter cartridge, head, fittings, and connector.
Std. No. 42—Aesthetic effects
Chemical Reduction
Chlorine
Taste & Odor
Mechanical Filtration
Nominal Particulate Class I
Std. No. 53—Health effects
Chemical Reduction
Lead
Mechanical Filtration
Cyst
Turbidity
System Tested and Classified by Underwriters
Laboratories against NSF/ANSI Standards 42 and 53 as
verified and substantiated by test data for the reduction of:
ANSI/NSF
STANDARDS
42 and 53
HEALTH CLAIM PERFORMANCE CLASSIFIED BY UL
This system has been tested according to NSF/ANSI 42 and 53 for
the reduction of the substances listed below. The concentration of the
indicated substances in water entering the system was reduced to a
concentration less than or equal to the permissible limit for water leaving
the system, as specified in NSF/ANSI 42 and 53.
Substance
Influent Challenge
Concentration
Max. Permissible
Product Water
Concentration
Reduction
Requirements
Minimum
Reduction
Average
Reduction
Standard 42—Aesthetic Effects
Chlorine 2.0 mg/L ± 10% ≥ 50% 98%
Particulate,
Class I
particles 0.5
to <1 µm
at least 10,000
particles/mL ≥ 85% 99.8%
Standard 53—Health Effects
Cyst Minimum 50,000/L 99.95% 99.99% 99.99%
Lead 8.5 0.15 mg/L ± 10% 0.010 mg/L 94.1% 97.2%
Lead 6.5 0.15 mg/L ± 10% 0.010 mg/L 98.9% 98.9%
Turbidity 11±1 NTU 0.5 NTU 98% 99%
†NTU = Nephelometric Turbidity Units