Eversan 9360-NT User manual
www.eversan.com
MODEL 9360-NT
FOOTBALL/TRACK
SCOREBOARD
Instruction Manual
Address: 34 Main Street, Whitesboro, NY 13492
Phone: 315-736-3967 • Toll Free: 800-383-6060 • Fax: 315-736-4058
SCOREBOARDS • TIMERS • MESSAGE SIGNS • VIDEO DISPLAYS • WIRELESS
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
Table of Contents
Check List .........................................................................................1
Installation Instructions......................................................................2
Instructions for Wiring.........................................................................2
Wireless Operation .............................................................................3
Football Mode Operating Instructions .................................................4
Track Mode Operating Instructions .....................................................5
Wireless Console Battery Operation (optional)....................................6
Cabled Console....................................................................................7
Wireless Console.................................................................................8
Maintenance of Outdoor Scoreboards.................................................9
9360 Series Assembly Drawing ..........................................................10
Installation Drawing ............................................................................11
Page 1
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
MODEL 9360-NT
FOOTBALL SCOREBOARD
WITH TRACK TIMER
INSTALLATION AND OPERATING INSTRUCTIONS
These instructions must be followed to ensure correct operation. The warranty will be considered null
and void if inspection and operating procedures are disregarded.
Should you require assistance or have any questions, please call 800-383-6060.
Check List
Model 9360-NT Scoreboard (2-Sections)
Control Console with LCD readout
Two Conductor Control Cable (Cabled Systems Only)
Z Brackets (4)
Support Brackets (2)
Antenna (2) (Wireless Systems Only)
• Model 812V battery (optional)
NOTE: Please check that these items are available prior to initial test of the scoreboard. If you
are missing any items, please call (800) 383-6060 for assistance.
Customer Shipping Inspection
A. Unpack scoreboard.
B. Unpack cable and control console. Plug the console cable and console into the console
connector on back (see diagram).
C. Assemble scoreboard using the instructions and hardware supplied before testing but prior to
hanging the scoreboard.
D. Testing - Remove four screws holding the panel on the 120VAC access box on the back of the
scoreboard. There is a standard 120VAC plug for testing. After testing cut connector provided.
Match colors on power cable provided to three wires on 120V box. This board operates on
120VAC at approximately 4 AMP.
NOTE: FAILURE TO TEST SCOREBOARD PRIOR TO INSTALLATION
WILL VOID ALL WARRANTIES.
Power scoreboard using 120VAC and test scoreboard using the operating instructions provided.
SHOULD THERE BE A MALFUNCTION OR SHIPPING DAMAGE,
NOTIFY THE SHIPPER AND EVERSAN IMMEDIATELY.
Page 2
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
INSTALLATION INSTRUCTIONS
1. It is recommended that a professional sign company be hired to install the scoreboard. Eversan
recommends a minimum depth of 6 ft. and a minimum diameter of 2 ½- ft. pylon for each I-beam.
2. Calculate the wind loading by standard formula for height and dimension of sign. Dimension of the
sign is 8FT. High x 18FT. Wide. Approximate weight is 400lbs.
NOTE: Check local codes for your area.
3. Prepare and sink 2Ea. I-beams 10FT apart. Minimum I-Beam recommendation W 10 x 15
conforming to ASTM A36, align with plumb line and careful measurements.
4. Determine height of lowest point for scoreboard, minimum recommendation 8FT. Mark and align
on all mounting beams parallel to visual ground sighting.
5. Drill and bolt (5/16 bolts) or weld provided bottom Z-brackets to the posts as shown in the
installation diagram.
6. Assemble the scoreboard on the ground and test according to the instructions. Make sure to
connect connectors between the top, bottom and each side of the scoreboard.
7. Lift scoreboard set onto Z bracket. Secure temporarily with a clamp.
8. Place the top Z-brackets on the board and install in the same manner as the lower.
9. The board is now ready to be wired. Wireless systems must have the antenna installed to the
right of Power Supply cover, on the front of the scoreboard. Just screw antenna into connector
provided.
INSTRUCTIONS FOR WIRING
1. Determine 120VAC entrance and run conduit to pre-installed electric box on back of scoreboard
(see diagram).
2. The scoreboard draws 5 amp, 600 watts, but requires its own circuit breaker. Eversan, Inc.
recommends using a 10-amp, GFCI breaker.
CAUTION: Cabled System Only
The data cable is a pre-wired, 2 conductor shielded, 22GA stranded cable. Any cable
splicing should be color-coded or failure of the computer power supply will result.
Continuity of the shield is essential in reducing possible damage due to lightening.
Page 3
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
Electrical Specifications:
Electric outlets for scoreboards are always on a “clean” unused, switched breaker box. Pay close
attention to the power source and connections. It is recommended that a key-switch or switched
breaker box be used to turn off the system at the end of use each day. The scoreboard should
always be powered down when not in use.
Power up Sequence:
120VAC Operation (Cabled System)
1. Plug the control console into the scoreboard using the cable provided. Any of the 2-pin
connectors on the control console can be used. The connector for the scoreboard is located
on the back (see diagram).
2. Power up the scoreboard using 120VAC,connection on back of scoreboard (see diagram).
3. The scoreboard will now go through diagnostics. Each digit will show a dash and then
starting at the minutes each digit will show an 8 and then go blank. The scoreboard will
then stay blank until the control console is turned on.
4. Turn the control console on using the rocker switch located on the upper left side. The
control console will display “WIRELESS NETWORK SYSTEM ID = XX” for approx. 5
seconds. The display will then show, ”EVERSAN, INC. DISPLAY SYSTEMS”, and then
“PLEASE SELECT 1=FOOTBALL, 3=TRACK. By pressing 1, on the keypad, you will put
the console in FOOTBALL mode, pressing 3 will put the console in TRACK mode. You are
now ready to use the operating instructions to test all the functions.
Note: If the control console will not power up or shows “BATTERY LOW” replace the
battery with a 9V alkaline battery or use the 9-volt adapter provided.
WIRELESS OPERATION
Eversan, Inc.’s 2.4GHZ frequency hopping wireless control system allows for multiple scoreboards to
be controlled separately or together within feet of each other.
Initializing the wireless system:
The following steps must be used to ensure proper communication from the 9300 series wireless
control console and each scoreboard you want to control.
1. Turn the power on to each scoreboard that you want to control. The scoreboards will show a dash
in each digit location.
2. Connect the antenna, 9VDC adapter provided or optional 12-volt battery, to the 9300 series
wireless control console (see diagram for proper placement).
Page 4
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
Turn the control console on using the rocker switch located on the upper left side. The control
console will display “WIRELESS NETWORK SYSTEM ID = XX” for approx. 5 seconds. The display
will then show, ”EVERSAN, INC. DISPLAY SYSTEMS”, and then “PLEASE SELECT 1=FOOTBALL,
3=TRACK. By pressing 1, on the keypad, you will put the console in FOOTBALL mode, pressing 3 will
put the console in TRACK mode. You are now ready to use the operating instructions to test all the
functions.
Football mode Operating instructions:
1. TO SET TIME: Press and release the TIME button once and enter a (4) Digit number, example
12:00 minutes would be set by pressing and releasing TIME followed by 1,2,0,0 via the 0-9
keypad.
2. TO SET THE SCORE: Press and release the HOME or GUEST button once to increment by
one. Press and hold down to decrement. Press and release the button and enter any 2-digit
number from 0-9 on the numbered keypad, example 06 would be set by pressing and releasing
HOME or GUEST and 0,6 using the 0-9 keypad.
3. TO SET BALL ON, DOWN or YARDS TO GO: Press and release the corresponding button
once to increment by one. Press and hold down to decrement. Press and release the button
and enter any number from 0-9 on the numbered keypad.
4. TO SET QTR: Time must be stopped. Press the QTR button once to increment by one. Press
and release the button and enter any number from 0-9 on the numbered keypad.
5. TO START THE TIME: Push GREEN START/ STOP once. To stop clock push START/ STOP
again.
6. BRIGHTNESS CONTROL: The illumination displayed by the scoreboard may be controlled by
pressing and releasing the BRIGHTNESS (red) button on the control console and then pressing
0-9 on the keypad. 9 will make the scoreboard the brightest and 1 will make the scoreboard the
dimmest. Zero will blank the scoreboard, but doesn’t turn the scoreboard off.
7. DELAY OF GAME: If Eversan, Inc. DELAY of GAME displays are being used in conjunction with
the 9362-100 scoreboard attach the remote RESET switch to the control console. Pressing and
releasing the remote RESET switch will reset and start the delay of game clock, default time is
24 seconds. To change the default time press and hold down the remote RESET and enter a
two-digit time.
0 H = 00 00:00 - 00 0G=00
y = 00 q =1 d =1 b = 00 9
HOME
T.O.L.
HOME
SCORE
GAME
TIME
DELAY
TIME
GUEST
T.O.L.
GUEST
SCORE
YARDS TO
GO
QTR DOWN BALL ON SCOREBOARD
BRIGHTNESS
Page 5
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
Track Mode Operating Instructions:
1. STARTING, STOPPING, and RESETTING RACE TIME: In Track mode the remote switch is used
to START, STOP, and RESET the RACE TIME. Pressing and releasing the remote switch once
STARTS the RACE TIME. Pressing and releasing the remote switch again STOPS the RACE
TIME.
With the clock stopped pressing and holding the remote switch for 5 seconds RESETS the RACE TIME
to zero.
2. TO SET THE SCORE: Press and release the HOME or GUEST button once to
increment by one. Press and hold down to decrement. Press and release the
button and enter any 2-digit number from 0-9 on the numbered keypad, example
06 would be set by pressing and releasing HOME or GUEST and 0,6 using the
0-9 keypad.
SCOREBOARD
BRIGHTNESS
0 H = 00 00:00.00 0G=00
y = 00 q =1 d =1 b = 00 9
HOME
SCORE
RACE
TIME
GUEST
SCORE
Page 6
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
Wireless Control Console Battery Operation: (Optional)
1. Turn the scoreboard power on.
2. Attach Eversan, Inc.’s special battery connector to the 4-pin connector on the back of
the wireless control console. (see diagram)
3. Connect the cigarette lighter plug into the Eversan battery pack or a car cigarette
lighter.
Care of Battery Pack
Under no circumstances should the battery pack be punctured or disassembled in any way. NEVER
insert anything into the battery receptacle except a standard cigarette lighter type plug. The battery
pack should always be stored in a fully charged condition and in a cool, dry place. When stored for a
long period of time, the battery should be charged before use.
Charging
The Battery should be charged after each use. Insert the cigarette lighter type plug of the charger into
the receptacle on the side of the battery pack. Plug the charger into any standard 120volt household
plug. Depending on the amount of drain on the battery, the following is a guide for recharging time. A
25% discharge requires 4 hours recharging. A 50% discharge requires 8 hours. A 100% discharge
requires 14 hours recharging time.
NOTE: The Battery should NOT be left in the Recharging mode for more than 24 hours as this
can damage the cell.
CAUTION: DO NOT attempt to charge this battery pack on currents other than 60-cycles 110volt/
120volt AC current. Do not attempt to use the
battery during charging.
Page 7
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
OFF
ON
ON OFF
Page 8
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
OFF
ON
ON OFF
Page 9
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
MAINTENANCE OF OUTDOOR SCOREBOARDS
The EVERSAN Outdoor Scoreboards rugged design will provide many years of trouble free
performance.
Should you have a problem:
The EVERSAN Outdoor Scoreboard modular design allows easy removal and replacement of all key
elements. Under no circumstances will EVERSAN, INC. pay for service performed on any of our
products without expressed written notice from EVERSAN, INC. to the Service Company.
Note to the customer:
Please call our qualified service technicians if you experience any difficulties. We can assist you in
solving your problem or help in returning the section in need of repair.
REMOVAL AND REPLACEMENT PROCEDURES
Should repair become necessary the customer will note that each digit (8) is housed as an individual
item within the scoreboard.
• Determine which digit is malfunctioning by observing the check out of 8's during power up or
during operation.
To remove or replace digits:
1. REMOVE ALL POWER FROM THE SCOREBOARD.
2. Unscrew the (4) four screws that hold the digit in place and slowly pull the digit away from
scoreboard.
3. Detach the 9-pin segment data cable connector by pressing down on the top the latch on the side
of the locking connector and pulling up on the connector. The Digit is removed.
4. Take the new digit and connect the 9-pin connector in the scoreboard to the 9-pin connector on
back of digit. DO NOT FORCE.
NOTE: The connector is polarized and must be installed in only one direction.
5. Replacing the (4) four screws that hold the digit into place and test scoreboard. If problem persists
please contact Eversan, Inc.
Page 10
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
Page 11
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
9360 INSTALLATION INSTRUCTIONS
www.eversan.com
MODEL 9360-NT
FOOTBALL
SCOREBOARD
Address: 34 Main Street, Whitesboro, NY 13492
Phone: 315-736-3967 • Toll Free: 800-383-6060 • Fax: 315-736-4058
SCOREBOARDS • TIMERS • MESSAGE SIGNS • VIDEO DISPLAYS • WIRELESS
EVERSAN
Table of contents
