evertz 570FEC-HW-X19 User manual

570FEC-HW-X19
Bulk 10GE FEC Encode/Decode
with Support for SMPTE2022–7 Hitless Switching
User Manual
© Copyright 2020
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 1.0, March 2020
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 570FEC-HW-X19 product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the
operation of the 570FEC-HW-X19 product. Due to on going research and development, features and specifications in this manual are subject to
change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste. Contact
your Local Authority for recycling advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

570FEC-HW-X19
Bulk 10GE FEC Encode/Decode
Revision 1.0 Page - i
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0
First Release
Mar 2020
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor
for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

570FEC-HW-X19
Bulk 10GE FEC Encode/Decode
Page - ii Revision 1.0
This page left intentionally blank

570FEC-HW-X19
Bulk 10GE FEC Encode/Decode
Revision 1.0 Page - iii
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. GETTING STARTED.....................................................................................................................3
2.1. CARE AND HANDLING OF OPTICAL FIBER......................................................................4
2.2. HARDWARE INSTALLATION..............................................................................................4
3. SPECIFICATIONS.........................................................................................................................5
3.1. INPUTS AND OUTPUTS ......................................................................................................5
3.2. SFP MODULES ....................................................................................................................5
3.3. FEC INSERTION PARAMETERS.........................................................................................5
3.4. FEC CORRECTION PARAMETERS ....................................................................................5
3.5. PHYSICAL (NUMBER OF SLOTS) ......................................................................................5
4. WEB INTERFACE.........................................................................................................................7
4.1. SYSTEM ...............................................................................................................................8
4.1.1. System ......................................................................................................................8
4.1.2. Control Port Configuration .........................................................................................8
4.1.3. Data Port Configuration .............................................................................................8
4.1.4. Data Port Monitor.......................................................................................................9
4.1.5. SFP Monitor.............................................................................................................10
4.1.6. ARP Control.............................................................................................................10
4.1.7. Temperature Monitor ...............................................................................................10
4.1.8. Configuration Management......................................................................................10
4.1.9. Time Management...................................................................................................10
4.1.10. Card Control............................................................................................................10
4.2. PRODUCT FEATURES ......................................................................................................11
4.2.1. License Control........................................................................................................11
4.3. FEC CORRECTION CONTROL..........................................................................................12
4.3.1. Main Input Port Control............................................................................................12
4.3.2. Backup Input Port Control........................................................................................13
4.3.3. RTP Sequence Error Monitor...................................................................................14
4.3.4. FEC Monitor ............................................................................................................14
4.3.5. IP Bitrate Monitor.....................................................................................................15
4.3.6. Output IP Control.....................................................................................................15
4.3.7. Settings ...................................................................................................................16
4.4. FEC INSERTION CONTROL..............................................................................................16
4.4.1. Input Port Control.....................................................................................................17
4.4.2. Input Monitor............................................................................................................17
4.4.3. FEC Control.............................................................................................................17
4.4.4. Output IP Control.....................................................................................................17
4.5. SYSTEM NOTIFY ...............................................................................................................18
4.5.1. System Monitoring Control.......................................................................................18
4.5.2. System Notify ..........................................................................................................18

570FEC-HW-X19
Bulk 10GE FEC Encode/Decode
Page - iv Revision 1.0
4.6. FEC CORRECTION NOTIFY .............................................................................................19
4.6.1. FEC Correction Alarm Control.................................................................................19
4.6.2. FEC Correction Notify.............................................................................................19
4.7. FEC INSERTION NOTIFY..................................................................................................20
4.7.1. FEC Insertion Alarm Control ...................................................................................20
4.7.2. FEC Insertion Notify................................................................................................20
4.8. SNMP SETUP....................................................................................................................21
4.8.1. SNMPv1 Trap Destinations.....................................................................................21
5. UPGRADE PROCEDURES ........................................................................................................23
5.1. FIRMWARE UPGRADE.....................................................................................................23
Figures
Figure 1-1: 570FEC-HW-X19 Block Diagram................................................................................2
Figure 2-1: 570FEC-HW-X19 Front Plate......................................................................................3
Figure 4-1: WebEASY® - Login Menu............................................................................................7
Figure 4-2: 570FEC-HW-X19 Main Menu......................................................................................7
Figure 4-3: WebEASY®- System Section (Part 1 of 3)..................................................................8
Figure 4-4: WebEASY® - System Section (Part 2 of 3)................................................................. 9
Figure 4-5: WebEASY® - System Section (Part 3 of 3)...............................................................10
Figure 4-6: WebEASY®- Product Features Section ....................................................................11
Figure 4-7: WebEASY®- FEC Correction Control Section (Part 1 of 3).......................................12
Figure 4-8: WebEASY®- FEC Correction Control Section (Part 2 of 3).......................................13
Figure 4-9: WebEASY®- FEC Correction Control Section (Part 3 of 3).......................................15
Figure 4-10: WebEASY®- FEC Insertion Control Section............................................................16
Figure 4-11: WebEASY® - System Notify Section........................................................................18
Figure 4-12: WebEASY® - FEC Correction Notify Section ...........................................................19
Figure 4-13: WebEASY® - FEC Insertion Notify Section ..............................................................20
Figure 4-14: WebEASY®- FEC Insertion Notify Section..............................................................21
Figure 5-1: WebEASY® - Upgrade Button on Top Menu Bar........................................................23
Figure 5-2: WebEASY® - Firmware Upgrade Menu .....................................................................23
Figure 5-3: WebEASY®- Firmware Upgrade Menu.....................................................................24

570FEC-HW-X19
Bulk 10GE FEC Encode/Decode
Revision 1.0 Page - 1
1. OVERVIEW
The 570FEC-HW-X19 platform is ideal for bulk FEC insertion and correction, offering flexibility with 3
modes of operation.
The first mode features bi-directional operation featuring up to 32x bi-directional processing flows. This
mode will allow RTP and FEC insertion for up to 32x IP paths. FEC correction along with Multi-path
Packet Merge will be applied for 32x processing paths.
The second mode of operation will insert FEC for up to 96x paths. It also supports RTP insertion.
The third mode of operation will perform FEC correction along with multi-path packet image for up to
96x processing paths.
The 570FEC-HW-X19 incorporates patent pending multi-path, multi-flow packet merge, accepting
packets from two diverse SFP paths. The multi-path, multi-flow based solution allows for bit error
resilience and for 100% QoS.
The 570FEC-HW-X19 can be managed via integrated HTTP web interface as well as VistaLINK PRO
and MAGNUM Unified Control.
Features & Benefits
•3 modes of operation
•Up to 32x bi-directional processing paths that can insert FEC and apply FEC correction. This
mode also supports Multi-Path Packet Merge and supports insertion or removal of RTP
•Up to 96x processing paths that can insert FEC and RTP***
•Up to 96x processing paths that can apply FEC correction. This mode also supports Multi-Path
Packet Merge and supports the insertion or removal of RTP Headers***
•Modules support control over frame controller or direct Ethernet interface. SNMP control from
VistaLINK PRO or MAGNUM Unified Control
***Please contact the factory for further information about this mode

570FEC-HW-X19
Bulk 10GE FEC Encode/Decode
Page - 2 Revision 1.0
Figure 1-1: 570FEC-HW-X19 Block Diagram