Evervue Ocea Pro User manual

1
OK
OK
1
4
2
5
3
6
Ocea Pro Lift Mount - Installation Manual
Check the Items Mount the Rail System
Remove the TV Wall Box Remove the Compartment Cover
Remove the Aluminum Frame of the TV
Plug the Power Cord
Rail System
Rail Sleeve
TV Remote Lift Remote
Power Supply
VESA
bracket
Allen Key
Ocea Pro
Standard TV
Aluminum
Frame
Zepp Remote & Accessories
(Located in the Compartment
on the back of Ocea Pro)
Screw to wall
Rail system
Screw to floor
aluminum
frame
Wall
Box
Wall
Box
Compartment
Cover
To Power Source
Power Cord
Upon receiving your order, open the crate and inspect the
contents.
Damages must be reported within 24 hours.
Plan where your new TV will be located. Drill holes into
floor and securely screw the base of the lift mount on it.
Using an allen key, remove the aluminum frame
attached on the TV.
Remove the TV wall box attached at the back. Use a screwdriver to remove the compartment cover
located at the back of the TV.
Insert the power cord through the opening of the
compartment cover. Then plug it to the power input
port located at the back of the TV.
Information is subject to change without prior notification.
© Copyright. Evervue USA Inc.
www.oceatv.com
Back view of Ocea Pro

12
7 8 9
10 11 12
Ocea Pro Lift Mount - Installation Manual
VESA
bracket
To Power
Source
Connect the Audio Cords Cover the compartment
Ocea Pro
TV
Rail Sleeve
Attach the TV to the VESA Bracket
Audio Cord goes
through
Compartment
Cover
tighten with
allen key
Rail System
Rail System
To power
source
Ocea Pro TV TV Wall Box Aluminum Frame
Power Cord
Insert the rail sleeve to the mount
Re-attach the TV Wall Box and the Frame
Plug to Power Source
Insert one end of the stipped audio cord into the red clip
and insert the other end of the cord into the black clip.
Then do the same for the other stripped audio cord.
Screw the TV to the VESA bracket.
Re-attach the compartment cover. Tighten the
surrounding screws to make sure that they don’t fall during
the rest of the installation process.
Slide the rail sleeve to the rail system. Then, using the
allen key, tighten the screws on the bottom as seen above .
Slide the TV back into the TV wall box. Then place the
aluminum frame around the TV and tighten its allen
screw back in place.
Plug the rail system to a power source.
Information is subject to change without prior notification.
© Copyright. Evervue USA Inc.
www.oceatv.com

13
13
16
14 15
Ocea Pro Lift Mount - Installation Manual
Press to lift the TV
Press to lower the TV
Turn on via
Touch Screen
Turn on via
Evervue Remote
Turn on Ocea Pro TVTest the Lift Mount Control your TV
Personalize your Ocea Pro
Using the lift remote provided in the package, control your
mount to raise your TV up or lower it down.
You can either turn your Ocea Pro TV on by simply
touching the power icon on the screen or by clicking
the power button on your Evervue remote.
Your Ocea Pro is ready. Use the Touch screen or the Zepp
remote to navigate the TV, install and manage apps, and
personalize your Ocea Pro.
On the Zepp remote included in the package, press the
mic/mouse button for 5 seconds to turn the remote on.
You can either use the remote as a mouse to control
the cursor on the screen (old remotes) or use the voice
command with the built-in microphone in the remote
(new remotes).
For more information please see the Zepp remote
manual here: https://www.evervuetv.com/download/
(Note: Voice Control Feature not
available on old remotes.)
Information is subject to change without prior notification.
© Copyright. Evervue USA Inc.
www.oceatv.com