Evervue Ocea Pro User manual

1
1
4
2
5
3
6
OK
O
K
Ocea Pro Hang on the Wall - Installation Manual
Zepp Remote & Accessories
(Located in the Compartment
on the back of Ocea Pro)
TV
Remote
Power Supply
Aluminum Frame
Allen Key
Ocea Pro Standard TV
Check the Items
Upon receiving your order, open the crate and inspect the
contents.
Damages must be reported within 24 hours.
Remove the Aluminum Frame
Using an allen key, remove the aluminum frame attached
to the TV.
Remove the TV Wall Box
Remove the TV wall box attached at the back.
Back view of Ocea Pro
Ocea Pro
TV
Aluminum Frame
TV Wall
Box
Mark the Holes
Place your TV wall box against the wall and mark
the holes where your hook pads will be placed.
Remove the Compartment Cover
Use a screwdriver to remove the compartment cover
located at the back of the TV.
Compartment Cover
Attach the Hooks
Drill into the holes you marked on the wall. Insert a
strong hook in all of them.
Information is subject to change without prior notification.
© Copyright. Evervue USA Inc.
www.oceatv.com

2
7
10
8
11
9
12
To Power
Source
Ocea Pro Hang on the Wall - Installation Manual
Plug the Power Cord
Insert the power cord through the opening of the
compartment cover. Then plug it to the power input
port located at the back of the TV.
Connect the Audio Cords
Insert one end of the stipped audio cord into the red clip
and insert the other end of the cord into the black clip.
Then do the same for the other stripped audio cord.
To Power Source
Compartment
Cover
Audio Cord goes
through
Cover the Compartment
Re-attach the compartment cover. Tighten the
surrounding screws to make sure that they don’t fall during
the rest of the installation process.
Re-Attach The TV Wall Box And The Frame
Slide the TV back into its TV wall box. Then place the
aluminum frame around the TV and tighten its allen
screws back in place.
Hang the TV to the Wall
Lift the TV and hang it to the four hooks you attached on
the wall.
Ocea TV Aluminum Frame
TV Wall Box
Turn on via
Touch Screen
Turn on via
Evervue Remote
Turn on Ocea Pro TV
You can either turn your Ocea Pro TV on by simply touching
the power icon on the screen or by clicking the power
button on your Evervue remote.
Power Cord
Information is subject to change without prior notification.
© Copyright. Evervue USA Inc.
www.oceatv.com

Ocea Pro Hang on the Wall - Installation Manual
3
13 14
Control your TV
On the Zepp remote included in the package, press the
mic/mouse button for 5 seconds to turn the remote on.
You can either use the remote as a mouse to control
the cursor on the screen (old remotes) or use the voice
command with the built-in microphone in the remote
(new remotes).
(Note: Voice Control Feature not
available on old remotes.)
For more information please see the Zepp remote
manual here: https://www.evervuetv.com/download/
Personalize your Ocea Pro
Your Ocea Pro is ready. Use the Touch screen or the Zepp
remote to navigate the TV, install and manage apps, and
personalize your Ocea Pro.
Information is subject to change without prior notification.
© Copyright. Evervue USA Inc.
www.oceatv.com