Evocare EcoStar 530 F-M User manual

Operating instructions EcoStar 530 F-M
Datei:1_EcoStar530F-M_9662597_Betriebsanleitung_EN_2009-05.doc Update: 2012-12-18, S. 34 , 40 9662597
2/42
We reserve the right to change execution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: [phone], Fax: [phone]
Contents
Page
1Introduction and general information 4
1.1 Storage 5
1.2 Name and address of manufacturer 5
1.3 Description of the machine 5
2Explanation of the safety symbols used 6
3Use of the appliance for the purpose intended 6
4CE-Declaration of Conformity 7
5General safety information 8
5.1 Operator's duty of care 8
5.2 Basic safety measures 9
6Delivery, shipping, installation and assembly 11
6.1 Delivery 11
6.2 Transport, installation and assembly 11
6.3 Operating conditions 12
6.4 Requirements for the electrical connection 12
6.5 Requirements for the fresh water connection 13
6.6 Requirements for the waste water connection 13
6.7 Emergency-off 13
6.8 Chemicals for the operation of the appliance 13
6.9 Instructions for the disposal of the packaging material 14
7Settings for initial commissioning by the service engineer 14
7.1 Commissioning 14
8Washing with dish-washer 14
8.1 Operating panel 14
8.2 Preparation for washing and rinsing 15
8.3 Manual dosing of detergent 15
8.4 Automatic dosing 15
8.5 Operation during washing and rinsing cycle 16
9Shutting down the dishwasher 17
10 Care and maintenance 17
10.1 Care, general 17
10.2 Refilling of detergent 17
10.3 Refilling with rinse aid 18
10.4 Cleaning 18
10.5 Maintenance of stainless steel surfaces 18
10.6 De-scaling 19
11 Machine with built-in water softening device EW10 19
11.1 General 19
11.2 Adjustment of water hardness 19
11.3 Capacity of the built-in water softening device 19
11.4 Regeneration 20
12 Basic information on the appliance 20
12.1 General description of the washing machine 20
12.2 Noise level 22
12.3 Data reg. the electrical and hydraulic equipment 22
12.4 Dimensions, technical data, installation instructions 22

Operating instructions EcoStar 530 F-M
Datei:1_EcoStar530F-M_9662597_Betriebsanleitung_EN_2009-05.doc Update: 2012-12-18, S. 34 , 40 9662597
3/42
We reserve the right to change execution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: [phone], Fax: [phone]
13 Non-ionizing radiation 22
14 Tips for self-help in the case of faults 23
15 Staff training 24
16 Authorized user of this documentation 24
17 Settings / modifications / on-site adaptation 25
17.1 Using the keyboard for programming 25
17.2 Code entry 25
17.3 Service level 26
17.4 Parameter list 31
17.5 Assignment list View inputs / control outputs 34
17.6 Rinse program parameter update: 01.05.2009 34
18 Operating errors 35
18.1 Information reporting and troubleshooting 36
18.2 Error messages and troubleshooting 37
19 Maintenance 39
19.1 Basic safety measures during normal operation 39
19.2 Dosing units 39
19.3 Maintenance plan 40
20 Environmentally acceptable measures, Disposal of the installation 41
21 Documentation 41

Operating instructions EcoStar 530 F-M
Datei:1_EcoStar530F-M_9662597_Betriebsanleitung_EN_2009-05.doc Update: 2012-12-18, S. 34 , 40 9662597
4/42
We reserve the right to change execution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: [phone], Fax: [phone]
1 Introduction and general information
Dear Customer,
We are delighted about the confidence you have shown in our products.
It is very important to us that you should obtain significant use from MEIKO products and
that they should make your work easier.
If you follow the instructions in this document carefully, your dishwashing machine will al-
ways give you total satisfaction and will have a long service life.
The cleaning and disinfection machine has been assembled by us at the factory and has
undergone a thorough inspection. This provides us with the certainty and you with the
guarantee that you will receive a fully developed product.
We would therefore ask you to read these operating instructions carefully before
using the installation. Any further associated operating instructions for accesso-
ries and integrated third-party products must be strictly observed!
These operating instructions inform users of this installation about the installation, its op-
erating methods, Its use, the safety instructions and the maintenance.
This information will help you to get to know the installation fully and to use it properly. It
will also enable you to avoid repairs and the related loss of operational time.
In the event of any damage caused by non-observance of these operating instructions,
any guarantee claims are invalid. We accept no liability for any consequential loss or
damage arising as a result.
MEIKO is constantly working on the further development of all its models.
We would therefore ask you to understand that because of this, we must reserve the right
to make modifications at any time to any items covered by the contract in terms of their
shape, fittings and technical characteristics.
No claims may therefore be based on the details, the images or the descriptions con-
tained in these operating instructions.
Should you require any further information, or in case any particular problems not dealt
with in great detail in the operating instructions should arise, you may contact the relevant
MEIKO branch to obtain the information you require.
We should also like to inform you that the contents of these instructions do not form part
of or amend any earlier or existing agreement, statement, or legal position.
All MEIKO’s obligations arise from the relevant purchase contract which also contains the
entire and only valid guarantee provisions.
These contractual guarantee rules shall be neither extended nor restricted as a result of
any explanations given in the instructions.
You receive all this technical documentation free of charge.
Further copies are available against the payment of a fee.
MEIKO very much hopes that you will enjoy our product and use it successfully.