EVS XSnano Use and care manual

Technical RefeRence
Hardware
Version 11.02 - July 2013



Copyright
EVS Broadcast Equipment S.A.– Copyright © 2012-2013. All rights reserved.
Disclaimer
The information in this manual is furnished for informational use only and subject to
change without notice. While every effort has been made to ensure that the information
contained in this user manual is accurate, up-to-date and reliable, EVS Broadcast
Equipment cannot be held responsible for inaccuracies or errors that may appear in this
publication.
Improvement Requests
Your comments will help us improve the quality of the user documentation. Do not
hesitate to send improvement requests, or report any error or inaccuracy on this user
manual by e-mail to [e-mail].
Regional Contacts
The address and phone number of the EVS headquarters are usually mentioned in the
Help > About menu in the user interface.
You will find the full list of addresses and phone numbers of local offices either at the end
of this user manual (for manuals on hardware products) or at the following page on the
EVS website: http://www.evs.com/contacts.
User Manuals on EVS Website
The latest version of the user manual, if any, and other user manuals on EVS products
can be found on the EVS download center, on the following webpage:
http://www.evs.com/downloadcenter.
HARDWARE TECHNICAL REFERENCE MANUAL XSnano Server 11.02.A
I

Table of Contents
TABLE OF CONTENTS II
WHAT'S NEW? IV
1. OVERVIEW 1
1.1. Presentation 1
2. SAFETY AND COMPLIANCE 2
2.1. Safety 2
2.2. EMC Standards 2
2.3. EMC Warning 3
2.4. FCCMarking 4
2.5. CE Marking 4
3. HARDWARE SPECIFICATIONS 5
3.1. Mechanical Dimensions and Weights 5
3.1.1. Rack Mount 4U Main Frame 5
3.1.2. Control Devices 7
3.2. Power Supply 8
3.3. Environmental Conditions 8
4. SOFTWARE SPECIFICATIONS 10
4.1. Video Specifications 10
4.2. Audio Specifications 11
4.3. Video Codecs and Bitrates 12
4.3.1. Supported Codecs 12
4.3.2. Maximum Bitrates 14
4.3.3. Internal Bandwidth 15
4.3.4. Recording Capacities 17
4.4. Gigabit Ethernet Transfers 18
4.5. Video Interpolation 20
5. HARDWARE INSTALLATION AND CABLING 22
5.1. Rack Installation 22
5.2. Rear Panel Description 23
5.2.1. Rear Panel Configurations 23
5.2.2. 4U Rear Panel Layout 23
5.3. Video Connections 27
II Table of Contents
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

5.4. Audio Connections 27
5.4.1. Audio Channels 27
5.4.2. Digital Audio DA-15 Pinout 29
5.4.3. Analog Audio DA-15 Pinout 30
5.4.4. Monitoring Audio DA-15 Pinout 31
5.5. RS422 Connections 32
5.5.1. RS422 Connector Pinout 32
5.6. Gigabit Network 33
5.6.1. Functional Overview 33
5.6.2. Important Rules 34
5.6.3. Switches 34
5.7. GPIOConnections 36
5.7.1. GP In Connections 36
5.7.2. GP Out Connections 38
6. BOARDS DESCRIPTION 40
6.1. Boards and Slots Configuration 40
6.2. V3X Video and Reference Boards 41
6.2.1. Description 41
6.2.2. CODConnectivity in SD and HD 44
6.2.3. CODConnectivity in 3D Dual Link 48
6.2.4. Channel Assignment 50
6.3. Audio Codec Board 51
6.4. H3X Board 52
6.5. RAID Controller Boards 54
6.5.1. RCTL Board on SAS Disk Array 54
6.6. MTPC A3/A6 Board 55
HARDWARE TECHNICAL REFERENCE MANUAL XSnano Server 11.02.A
Table of Contents III

What's New?
In the Technical Reference manual, the icon has been added on the left margin to
highlight information on new and updated features.
The changes linked to new XSnano chassis have been added to this technical reference
manual. This implies many changes. The main changes have been done in the following
sections:
New hardware chassis
• See section " Rack Mount 4U Main Frame" on page 5
• See section "4U Rear Panel Layout" on page 23
• See section "CODConnectivity in SD and HD" on page 44
• See section "CODConnectivity in 3D Dual Link" on page 48
Extension of supported codecs (one codec per XSnano server)
• See section "Presentation" on page 1
• See section "Video Codecs and Bitrates" on page 12
Former sections have been fully restructured and generalized for all EVS servers:
• See section "Video Codecs and Bitrates" on page 12
• See section "Gigabit Ethernet Transfers" on page 18
IV What's New?
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

1. Overview
1.1. Presentation
Welcome to the EVS range of products and thank you for using an EVS XSnano server.
We will do our best to satisfy your video production needs and we look forward to
continuing working with you.
The EVS XSnano servers are full digital in PAL (625i), NTSC (525i), 720p, and 1080i
standards. These multi-channel, disk-based video servers are ideal for a wide range of
broadcast applications, from sports and live production to playout and transmission.
The XSnano servers are 4-channel HD/SD slow motion replay servers from EVS.
Optimized for multiple applications, such as ingestion of audio/video files, live feed
recording, live slow motion and super motion, clipping and playlist playout control,
XSnano servers offer a flexible configuration.
They natively support a wide range of HD codecs, such as M-JPEG, Avid DNxHD®, VC-
3, Apple ProRes®, MPEG-2 intra, Panasonic DVCPRO HD, AVC-Intra Class 100, as
well as SD codecs. The XSnano server can be purchased with a single codec license.
With its GigE networking capabilities, A/V files can be played and simultaneously
transferred to other EVS servers, as well as all standard NLE and archive systems.
HARDWARE TECHNICAL REFERENCE MANUAL XSnano Server 11.02.A
1. Overview 1

2. Safety and Compliance
2.1. Safety
This equipment has been designed and tested to meet the requirements of the following:
• EN 60950 (European): Safety of information technology equipment including business
equipment.
• IEC 950 (International): Safety of information technology equipment including
business equipment.
In addition, this equipment has been designed to meet the following:
• UL 1950 - USA (USA): Safety of information technology equipment including business
equipment.
2.2. EMC Standards
This equipment complies with following EMC standards:
Standard Area Title
EN 55022 European Emission Standard
EN 61000-3-2 European Electromagnetic Compatibility (EMC) Part 3 (Limits);
Section2; limits for harmonic current emissions
(equipment input current <16A per phase)
EN 61000-3-3 European European Electromagnetic Compatibility (EMC) Part 3
(Limits), Section 3; limitation of voltage fluctuation and
flicker in low-voltage supply systems for equipment with
rated current of 16 A.
EN 61000-4-3 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 3; Testing and measurement
techniques - Radiated, radio-Frequency,
electromagnetic field immunity test.
EN 61000-4-4 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 4; Testing and measurement
techniques - Electrical fast transient/burst immunity
test.
EN 61000-4-5 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 5; Testing and measurement
techniques - Surge immunity test.
2 2. Safety and Compliance
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

Standard Area Title
EN 61000-4-6 European European Electromagnetic Compatibility (EMC) Part 4
(Limits); Section 6 ; Testing and measurement
techniques - Immunity to conducted disturbances,
induced by radio-frequency fields.
EN 61000-4-7 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 7; harmonics and interharmonics
measurements and instrumentation, for power supply
systems and equipment connected thereto.
EN 61000-4-
11
European European Electromagnetic Compatibility (EMC) Part 4
(Limits); Section 11 ; Voltage dips, short interruptions
and voltage variations immunity tests.
EN 50082-1 European European Generic Immunity Standard – Part 1:
Domestic, commercial and light industry environment.
FCC USA Conducted and radiated emission limits for a Class A
digital device, pursuant to the Code of Federal
Regulations (CFR) Title 47 –
Telecommunications, Part 15: Radio Frequency
devices, subpart B-Unintentional Radiators.
2.3. EMC Warning
Changes or modifications not expressly approved by the manufacturer for compliance
could void the user's authority to operate the equipment.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
HARDWARE TECHNICAL REFERENCE MANUAL XSnano Server 11.02.A
2. Safety and Compliance 3

2.4. FCCMarking
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
The following labels are affixed on the equipment:
2.5. CE Marking
The CE marking is affixed to indicate compliance with the following directives:
• 89/336//EEC of 3 May 1989 on the approximation of the laws of the Members States
to electromagnetic compatibility.
• 73/23/EEC of 19 February 1973 on the harmonization of the laws of the Members
States relating to electrical equipment designed for use within certain voltage limits.
• 1999/5/EC of 9 March 1999 on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity.
4 2. Safety and Compliance
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

3. Hardware Specifications
3.1. Mechanical Dimensions and Weights
3.1.1. Rack Mount 4U Main Frame
Weight
4U - 19 inches chassis 30kg / 66.15lb
Dimensions
The following drawings provide the various dimensions, in mm, of the XSnano server with
a 4U chassis.
Front View
Left View
HARDWARE TECHNICAL REFERENCE MANUAL XSnano Server 11.02.A
3. Hardware Specifications 5

Right View
Back View
6 3. Hardware Specifications
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

3.1.2. Control Devices
The following control devices can optionally be connected to your server to control it.
XSense Remote Control Panel
Weight: 3.24 kg / 7.13 lb.
Keyboard
Weight: 0.4 kg / 0.9 lb.
Tablet
Weight: 0.3 kg / 0.66 lb. (Ref: Wacom® CTF-430 Bamboo One)
HARDWARE TECHNICAL REFERENCE MANUAL XSnano Server 11.02.A
3. Hardware Specifications 7

3.2. Power Supply
Redundant Power Supply
The server is fitted with two auto switching and hot-swappable power supplies.
The secondary hot-swappable power supply should be connected to the mains to allow
automatic power switching to this second power supply should the first one fail.
Grounding
Warning
The protective earth must be connected to the ground before powering up the
unit.
Ensure the disk recorder unit is properly grounded at all times to avoid electrical
shock hazard.
Electrical Specifications
Rated voltage: 115 to 240 VAC (single phase)
Rated frequency: 47-63 Hz
Input connector: CEE 22/IEC 320 3-pin male receptacle
Connection to supply: Pluggable equipment Type A (EN60950 §1.2.5): Equipment which
is intended for connection to the building power supply wiring via a non-industrial plug and
socket-outlet or a non-industrial appliance coupler or both. Correct mains polarity must
always be observed. Do not use reversible power plugs with this equipment.
Class of equipment: Class 1 equipment (EN60950 § 1.2.5): electric shock protection by
basic insulation and protective earth.
3.3. Environmental Conditions
Operating
• Temperature: 10°C to + 50°C (50°F to 122°F) ambient with free air flow
• Relative humidity: 0% to 90% (non-condensing)
• Cooling requirements: Forced air cooling air flow from front to back
• Handling/movement: Designed for fixed use when in operation
8 3. Hardware Specifications
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

Storage and Transport
• Temperature: 0°C to +70°C (32°F to 158°F)
• Relative humidity: 0% to 90% (non-condensing)
HARDWARE TECHNICAL REFERENCE MANUAL XSnano Server 11.02.A
3. Hardware Specifications 9

4. Software Specifications
4.1. Video Specifications
Video Standards
The following table lists the video specifications both in SD and in HD format for your
XSnano server.
Standard Definition High Definition
Video Formats 525i 59.94fps (NTSC)
625i 50fps (PAL)
720p 50/59.94fps
1080i 50/59.94fps
Digital Interface 10-bit 4:2:2 Serial
(ST 259:2008).
Full frame synchronizer at
input.
10-bit 4:2:2 Serial (ST 292-
1:2011).
Full frame synchronizer at
input.
Number of Channels 4 channels,
reversible REC/PLAY
4 channels,
reversible REC/PLAY
Monitoring & Down-
converters
1 SD SDI per channel, with
OSD
1 HD SDI output per
channel, with OSD
Reference Analog Black Burst Analog Black Burst and HD
Tri-Level Sync
Graphics Board n.a. n.a.
10 4. Software Specifications
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

SMPTE Standards
The following table lists the SMPTE standards supported by your server.
Configuration SMPTE standard
SD SDI ST 259:2008 (525i 59.94Hz; 625i 50Hz)
HD SDI ST 292-1:2011, ST 292:2012
(720p 50 and 59.94Hz; 1080i 50 and 59.94Hz)
Embedded audio HD ST 299-0:2010, ST 299-1:2009
AES/EBU audio ST 272:2004
LTC ST 12-1:2008, ST12-2:2008
D-VITC ST 266:2012
Ancillary TC in HD RP 188
Vertical Ancillary Data ST 334:2000
VC-3 ST 2019-1:2008
Dual Link 1.5 Gb/s ST 372:2011
Mapping of Audio Metadata into
Vertical Ancillary data
ST 2020-2:2008, ST 2020-3:2008
4.2. Audio Specifications
Audio Analog and Digital Configurations
The following optional audio configurations are available:
•Configuration BNC AES/EBU + DA-15 Analog:
◦ 16 input and 16 output (8 pairs + 8 pairs) AES/EBU or DolbyE unbalanced on 16
BNC connectors
◦ 8 input and 8 output analog balanced channels on 4 DA-15 connectors
•Configuration DA-15 AES/EBU + DA-15 Analog:
◦ 16 input and 16 output (8 pairs + 8 pairs) AES/EBU or DolbyE on 4 DA-15
connectors
◦ 8 input and 8 output analog balanced channels on 4 DA-15 connectors
Additional Audio Specifications
• 4 additional analog balanced output channels for monitoring
• All audio connectors on mainframe
• Up to 64 embedded audio channels (4*16 audio mono channels per video channel)
HARDWARE TECHNICAL REFERENCE MANUAL XSnano Server 11.02.A
4. Software Specifications 11

Audio Processing
• Uncompressed audio
• 24 bit processing and storage
• Sample rate converter from 25-55 kHz to 48kHz
• Audio scrub
• Audio mix
4.3. Video Codecs and Bitrates
4.3.1. Supported Codecs
Codecs and Related License Codes
The XSnano server uses an intra-frame video encoding technique. It supports natively the
video codecs presented in the table below.
The XSnano server can be purchased with a single codec license.
Codec SD HD Code
Protection
Mjpeg SD √ √ Code 10
DVCPro 50 √ - Code 9
IMX √ - Code 11
Intra-frame MPEG-2 - √ Code 12
Avid DNxHD® - √ Code 5
Apple ProRes 422 - √ Code 6
DVCPro HD - √ Code 8
AVC-Intra 100 - √ Code 13
The codecs are available when the corresponding code is valid.
12 4. Software Specifications
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

Target Bitrate Range and Default Values
The target bitrate of the encoded video stream can be set by the user within the accepted
range: 8 to 100Mbps for standard definition, 40 to 250Mbps for high definition with the
exception of Apple ProRes, Avid DNxHD® and DVCPro codecs working with defined
bitrates.
The default values are M-JPEG 30Mbps for standard definition and M-JPEG 100Mbps for
high definition.
Content Transfer Encoding and File Header
It is possible to perform the encoding process in 8-bit or 10-bit and to write a 10-bit file on
selected codecs.
The following table summarizes the proposed configurations:
Codec Encoding File Header
DNxHD 120/145 8-bit 8-bit
DNxHD 185/220 8-bit 8-bit
DNxHD 185x
DNxHD 220x
10-bit 10-bit
ProRes 85 8-bit 10-bit
ProRes 120/145 8-bit 10-bit
ProRes 185/220 8-bit or 10-bit 10-bit
DVCPro HD 8-bit 8-bit
M-JPEG 8-bit 8-bit
MPEG 8-bit 8-bit
AVC-Intra 100 10-bit 10-bit
Note
When encoding in 10-bit, it is not possible to use the graphic functionality: Paint,
Target, Logo Insertion, and internal offside line.
HARDWARE TECHNICAL REFERENCE MANUAL XSnano Server 11.02.A
4. Software Specifications 13

4.3.2. Maximum Bitrates
These maximum values are valid for XSnano servers running Multicam version 11.00 or
higher. They guarantee a smooth play and a browse at 100% speed on all channels
simultaneously.
Codec Format 2 ch 4 ch 4ch
(3D)
SD JPEG PAL 100 100 N/A
NTSC 100 100 N/A
HD JPEG PAL 225 225 180
NTSC 250 250 180
HD MPEG PAL 225 225 180
NTSC 250 250 180
Avid DNxHD® PAL 185 185 185
NTSC 220 220 220
Apple ProRes 422 PAL 185 185 185
NTSC 220 220 220
DVCPro 50 PAL 50 50 N/A
NTSC 50 50 N/A
DVCPro HD PAL 100 100 100
NTSC 100 100 100
AVC-Intra 100 PAL 111 111 110
NTSC 111 111 110
14 4. Software Specifications
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013