Product Disassemble/Storage
Followthe assembly instructions inreverseorder;
1.
Unscrew the top handle section.
2.
Unscrew the middle section.
3.
Unscrew the bottom sectionfrom theblack pivotarm of the sweeper.
Product Use
Turn the knob ontop of theEvolution sweeper to select either
HIor LO brush heightasrequired for thecarpet surface
to be cleaned. HIis best suited for longer pile or thicker carpets.
LO should be used onlow pile carpets and rugs.
Push the Evolution 3 sweeper along the carpet surface to be cleaned at a steady pace keeping the
sweeper unit level to the floor to remove everyday dust and dirt leaving your carpets clean and free
of debris.
To Empty the Sweeper
Emptyyour sweeper regularly toensure maximum efficiency.
To empty, hold the sweeper over a bin and lift the lever
located on the top of the sweeper (see picture 1).
Tip the unit forward to clean the front pan and then tip the unit
backward slightlyto empty the rear pans (see picture 2).
Releasethe lever toclose.
Cleaning and Care of your Evolution 3 Sweeper
Regularly check the brushes and remove trapped fluff and debris to keep your sweeper operating
at maximum efficiency. The case can be wiped with a damp cloth but do not immerse the unit in
water or other liquids.