
Assembly Instructions
1. Slide the metal rod through the holes on the bottom shelf and attach from
underneath using the included small screws (circled below right).
2. Place two bolts through the bottom of the cabinet (circled) and screw into the
metal rod using a 4mm allen wrench
3. Place the shelf pegs into the holes ensuring they are on the same level (indicated
by arrows). You can choose from three different shelf heights depending on your
needs.
4. Attach door knobs to doors using included bolts.
5. Attach to a wall with hardware appropriate for the wall material (included are wall
anchors and screws for drywall installation – other wall types will require different
hardware which is not included). Please consult your local hardware store for
advice on appropriate fasteners for your specific wall type.
Included In The Box:
Bathroom Cabinet – X 1 Metal Bar – X 1
Bottom Shelf – X 1 Inside Shelf – X 1
Shelf Peg – X 4 Wall Anchor – X 2
Wall Screw – X 2 Small Screw – X 4
Bolt – X 2 Door Knob and Bolt – X 2
Damaged or Missing Parts? Call 1-877-969-2710
Before you throw away the box, please check that you have all the parts listed
below. If any are missing, please contact our customer service at the number
above and we will gladly ship your replacement parts free of charge.