exhart 14362 User manual

Solar Unit Flower (2) Middle Flower Cylinder Nut Bolt (2)
Stake Base Stake Support Leaf Pole Middle Pole Hex Wrench
Step 1:
Attach flower (B) to leaf pole (H) by using the
nut bolt (E). Use hex wrench (J) to tighten nut
bolt (E). Repeat step for the other side.
Step 2:
Place solar unit (A) firmly on top of the
cylinder (D).
TROPICAL KINETIC SPINNER
Assembly Instructions

Step 3:
Place middle flower (C) on top of leaf pole (H).
Then place solar unit (A) (the result of step 2)
firmly on top of leaf pole.
Step 4:
Attach leaf pole (H) to middle pole (I) by
turning it to the right until it is firmly tightened.
Lay Assembly on the ground for the following steps.
Step 5:
Slide stake support (G) into stake base (F) by inserting it through the top. Then attach stake base (F) into
the bottom of middle pole (I) (result of step 5) by turning it to the right until it is firmly tightened. When
everything is assembled, insert stake base firmly into the ground. For best results, install on a flat ground
and ensure that the stake is 90 degrees vertical to the ground.
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2019 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone]
www.exhart.com / instructions