exhart Kinetic Garden Stake User manual

Step 1: Attach nut bolt (A) to flower (B) by
sliding nut bolt into flower.
Step 2: Attach top pole (F) to nut bolt (A) (the
result of step 1) by turning it to the right until it
is firmly tightened. Note: Use allen wrench (J)
to hold nut bolt in place.
Flower Small Spinner Medium Spinner
Middle Pole
Step 3: Attach small spinner (C) to top pole (F)
(the result of step 2) by sliding small spinner
into top pole.
Step 4: Attach top pole (F) to top pole (F) (the
result of step 3) by turning it to the right until it is
firmly tightened.
Bottom Pole Stake Support Stake Base
Nut Bolt
Allen Wrench
Top Pole (2)
Large Spinner
IK
J
Kinetic Garden Stake
Assembly Instructions

Step 9: Slide the stake support (I) into the stake base (J) by pushing the button on stake base in. Then
insert stake base (J) into the bottom of bottom pole (H) by aligning the button on stake base with the
hole on bottom pole until it clicks into place. When everything is assembled, insert stake base firmly
into the ground. For best results, install on flat ground and ensure that the stake is 90 degrees vertical
to the ground.
Lay Assembly on the ground for the
following steps.
Step 8: Attach bottom pole (H) to middle pole
(G) (the result of step 7) by turning it to the
right until it is firmly tightened.
Step 7: Attach large spinner (E) to middle pole (G)
(the result of step 6) by sliding large spinner into
middle pole.
Step 5: Attach medium spinner (D) to top pole (F)
(the result of step 4) by sliding medium spinner
into middle pole.
Step 6: Attach middle pole (G) to top pole (F)
(the result of step 5) by turning it to the right
until it is firmly tightened.
I
JJ
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2019 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone]
www.exhart.com