exhart 18984 User manual

Step 1:
Attach top pole (A) to middle pole (B) by
turning it to the right until it is firmly tightened.
Step 2:
Slide bottom leaf (C) through top pole (A) (the
result of step 1) by inserting it through the top.
Note: Leaf must sit above ring on middle pole (B).
Top Pole Middle Pole
Stake Base
Wheel
Lay Assembly on the ground for the
following steps.
Step 3:
Attach wheel (D) to top pole (A) (the result of step
3) by turning it to the right until it is firmly tightened.
Stake Support
Leaf



Step 5:
Slide the stake support (F) into stake base (E) by inserting it through the top. Then attach stake base (E) into the
bottom of the middle pole (B) by turning to the right until firmly tightened. When everything is assembled, insert
stake base firmly into the ground. For best results, install on flat ground and ensure that the stake is 90 degrees
vertical to the ground.
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2019 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone]
www.exhart.com / instructions