Exile SXT7 User manual
SXT7
Owner’s manual
Specifications
The SXT7 began with one design
goal in mind: “Bring Hi-Definition
Sound” to the marine environment!
The Exile sound quality, form factor,
power handling and fit and finish are
unmatched by anything available on
the market today. The SXT7 includes a
unique “fixed mount / rotational”
clamping system that can direct sound
in nearly 360 degrees and fits virtually
any boat tower.
Thank you for choosing Exile Audio.
With proper installation, your new speakers will deliver
years of listening pleasure.
We strongly recommend that you have your new
speakers installed by an authorized Exile Audio
dealer. They are professionals and have the
necessary tools and experience to properly
install your new equipment. Let us know if
you need assistance finding an authorized
dealer, we can help.
If you prefer to install your own audio
gear, please read this instruction
manual completely before beginning
the installation process.
© 2022 Exile Audio • www.exileaudio.com SXT7 Owner’s Manual© 2022 Exile Audio • Lake Oswego, OR • www.exileaudio.com Rev1 - 6/22
Designed and Engineered in the USA
High Definition
Tower speakers
Contents:
1 pair of SXT7 Tower Speakers
For the latest news, product releases and exclusive discounts
follow us:
Have questions?
Need help finding an Authorized Exile Audio Dealer?
Give us a call at 1-888-249-0970,
or use the dealer locator on www.exileaudio.com
MODEL SXT7
Power Handling (RMS) 250W
Power Handling (PEAK)500W
Tweeter 26mm Titanium Diaphragm
Clamp to Tower Fit 1 7
/8in. - 3 in.
/exileaudio
© 2022 Exile Audio • www.exileaudio.com SXT7 Owner’s Manual © 2022 Exile Audio • www.exileaudio.com SXT7 Owner’s Manual
13
24
STEP 1. You will have to
assemble the speaker to the
clamp. To do this, thread the
wires from the post through
the center hole in the bottom
half of the clamp. Then,
making sure to use thread
lock on each bolt, secure
each bolt through the clamp
into the post.
STEP 2. Connect by
crimping or soldering the
wires from the speaker to
the corresponding wires
from your tower.
We recommend having a
second person hold the
speaker in place while
doing this step.
STEP 4. Once the
speaker is secure to
the tower loosen the
two set screws, at the
top of the collar, to
allow speaker rotation.
The speaker will allow
nearly 360° of rotation
so you can aim it
exactly where you
would like.
Once the position is
where you want it,
simply tighten the two
set screws to lock the
speaker from spinning.
DO NOT remove
the lock bolt at the
bottom of the collar
unless otherwise
instructed to.
This bolt keeps the
speaker from falling
from the clamp.
STEP 4. Hand tighten the
clamp bolts through the top half
of the clamp around the tower
and into the lower half of the
clamp. Begin alternately
tightening the bolts, with the
supplied allen wrench, until
both bolts are equally tight
around the tower and the
clamp is griping the
tower bar.
Installation Installation
Boat Tower
WARNING:
Other Exile Speakers manuals
