Exmark Lazer Z LZE User manual

LAZERZ®
ForSerialNos.
411,294,212&Higher
LazerZ(LZE,LZS,LZX)Models
PartNo.4505-959Rev.B

WARNING
CALIFORNIA
Proposition65Warning
Theengineexhaustfromthisproduct
containschemicalsknowntotheStateof
Californiatocausecancer,birthdefects,
orotherreproductiveharm.
Batteryposts,terminals,andrelated
accessoriescontainleadandlead
compounds,chemicalsknowntotheStateof
Californiatocausecancerandreproductive
harm.Washhandsafterhandling.
Useofthisproductmaycauseexposure
tochemicalsknowntotheStateof
Californiatocausecancer,birthdefects,
orotherreproductiveharm.
Important:ItisaviolationofCaliforniaPublic
ResourceCodeSection4442or4443touse
oroperatetheengineonanyforest-covered,
brush-covered,orgrass-coveredlandunlessthe
engineisequippedwithasparkarrester,as
denedinSection4442,maintainedineffective
workingorderortheengineisconstructed,
equipped,andmaintainedforthepreventionof
re.
Toacquireasparkarresterforyourunit,seeyour
EngineServiceDealer.
ForallmodelsthatdonothaveExmarkengines,
pleaserefertotheenginemanufacturer's
informationincludedwiththemachine.
FormodelswithExmarkengines,refertothis
manualforinformation.
Thegrossornethorsepower(ortorque)of
thisenginewaslaboratoryratedbytheengine
manufacturerinaccordancewiththeSociety
ofAutomotiveEngineers(SAE)J1940orJ2723.
Asconguredtomeetsafety,emission,and
operatingrequirements,theactualengine
horsepower(ortorque)onthisclassofmower
willbesignicantlylower.
©2021ExmarkMfg.Co.,Inc.
415IndustrialRow
Beatrice,NE683102
Contactusatwww.Exmark.com.
PrintedintheUSA
AllRightsReserved

Introduction
CONGRATULATIONSonthepurchaseofyour
ExmarkMower.Thisproducthasbeencarefully
designedandmanufacturedtogiveyouamaximum
amountofdependabilityandyearsoftrouble-free
operation.
Thismanualcontainsoperating,maintenance,
adjustment,andsafetyinstructionsforyourExmark
mower.
BEFOREOPERATINGYOURMOWER,
CAREFULLYREADTHISMANUALINITS
ENTIRETY.
Byfollowingtheoperating,maintenance,andsafety
instructions,youwillprolongthelifeofyourmower,
maintainitsmaximumefciency,andpromotesafe
operation.
Tomaximizesafety,performance,andproper
operationofthismachine,itisessentialthatall
operatorscarefullyreadandfullyunderstandthe
contentsoftheOperator’smanualprovidedwith
theproduct.Failuretocomplywiththeoperating
instructionsorreceivepropertrainingmayresult
ininjury.Gotohttps://www .Exmark.comfor
additionalsafeoperationinformation,suchassafety
tips,trainingmaterials,andOperator’smanuals.
Ifadditionalinformationisneeded,orshould
yourequiretrainedmechanicservice,contactyour
authorizedExmarkequipmentdealerordistributor.
AllExmarkequipmentdealersanddistributorsare
keptinformedofthelatestmethodsofservicing
andareequippedtoprovidepromptandefcient
serviceintheeldorattheirservicestations.They
carryamplestockofservicepartsorcansecurethem
promptlyforyoufromthefactory.
AllExmarkpartsarethoroughlytestedandinspected
beforeleavingthefactory,however,attentionis
requiredonyourpartifyouaretoobtainthefullest
measureofsatisfactionandperformance.
Wheneveryouneedservice,genuineExmarkparts,
oradditionalinformation,contactanAuthorized
ServiceDealerorExmarkCustomerServiceandhave
themodelandserialnumbersofyourproductready.
Figure1identiesthelocationofthemodelandserial
numbersontheproduct.Writethenumbersinthe
spaceprovided.
g253898
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Forcompletewarrantydetails,see
https://www.Exmark.com.Youmayalsocall
us402-223-6375torequestawrittencopyofthe
product’swarranty.
3

Contents
Introduction...........................................................3
Safety.....................................................................5
SafetyAlertSymbol.........................................5
GeneralSafety.................................................5
SafetyandInstructionalDecals.......................6
Specications........................................................18
Systems..........................................................18
Dimensions....................................................23
TorqueRequirements.....................................25
ProductOverview.................................................26
Operation..............................................................27
Controls.........................................................27
BeforeOperation..........................................33
OperatingInstructions...................................35
DuringOperationSafety.................................35
AfterOperation..............................................47
Transporting..................................................47
Maintenance..........................................................50
MaintenanceSafety.............................................50
RecommendedMaintenanceSchedule(s)............51
PeriodicMaintenance........................................52
EngineMaintenance.......................................52
EngineSafety.................................................52
CheckEngineOilLevel..................................52
CheckMowerBlades......................................55
CheckSafetyInterlockSystem........................56
CheckRolloverProtectionsSystems(Roll
Bar)Knobs.................................................60
CheckWingDeckBushings............................60
CheckSeatBelt...............................................62
CheckforLooseHardware.............................62
ServiceAirCleaner.........................................62
ChangeKohlerandKawasakiEngine
Oil..............................................................63
ChangeBriggsEFIEngineOil........................63
CheckDeckLiftOilLevel...............................64
CheckHydraulicOilLevel..............................64
CheckTirePressures......................................64
CheckConditionOfBelts...............................65
LubricateGreaseFittings................................65
LubricateDeckLiftPivot...............................66
CheckSparkPlugs..........................................67
ChangeHydraulicSystemFilterand
Fluid..........................................................67
ChangeDeckLiftPowerUnitFluid–Wing
DeckModelOnly.......................................67
WheelHub–SlottedNutTorque
Specication...............................................68
CheckSparkArrester(ifequipped)..................68
ThreadLockingAdhesives..............................68
MobilHTSGrease(OrFood-Grade
Anti-seize)X-SeriesOnly............................68
Copper-BasedAnti-seize...............................68
DielectricGrease............................................68
Adjustments......................................................69
DeckLeveling–Non-WingDeck
Models.......................................................69
DeckLeveling–WingDeckModels.................71
PumpDriveBeltTension................................73
DeckBeltTension..........................................74
AdjustingtheParkingBrake............................74
ElectricClutchAdjustment.............................74
MotionControlLinkageAdjustment..............76
MotionControlDamperAdjustment..............76
MotionControlNeutralLockPivot
Adjustment................................................77
MotionControlHandleAdjustment...............77
MotionControlFullForwardTracking
Adjustment................................................78
CasterPivotandGaugeWheelPivot
BearingsPre-LoadAdjustment...................78
Cleaning............................................................79
CleaningandStoringSafety.............................79
CleanDebrisFromMachine...........................79
CleanEngineandExhaustSystem
Area...........................................................79
RemoveEngineShroudsandClean
CoolingFins...............................................79
CleanHydroFanCoolingGuards,Hydro
CoolingFins,andFan.................................79
CleanGrassBuild-UpUnderDeck.................80
CleaningtheSuspensionSystem.....................80
WasteDisposal...............................................80
Troubleshooting....................................................81
Schematics............................................................84
CaliforniaProposition65Warning
Information...............................................95
4

Safety
Safety
Thismachinehasbeendesignedinconformance
withtheAmericanNationalStandardsInstitute
B71.4forCommercialTurfCareEquipment–Safety
Specications.
SafetyAlertSymbol
ThisSafetyAlertSymbol(Figure2)isusedbothin
thismanualandonthemachinetoidentifyimportant
safetymessageswhichmustbefollowedtoavoid
accidents.
Thissymbolmeans:ATTENTION!BECOME
ALERT!YOURSAFETYISINVOLVED!
g000502
Figure2
SafetyAlertSymbol
Thesafetyalertsymbolappearsaboveinformation
whichalertsyoutounsafeactionsorsituations
andwillbefollowedbythewordDANGER,
WARNING,orCAUTION.
DANGER:Indicatesanimminentlyhazardous
situationwhich,ifnotavoided,Willresultindeathor
seriousinjury.
WARNING:Indicatesapotentiallyhazardous
situationwhich,ifnotavoided,Couldresultindeath
orseriousinjury.
CAUTION:Indicatesapotentiallyhazardous
situationwhich,ifnotavoided,Mayresultinminor
ormoderateinjury.
Thismanualusestwootherwordstohighlight
information.Importantcallsattentiontospecial
mechanicalinformationandNoteemphasizes
generalinformationworthyofspecialattention.
GeneralSafety
Thismachineiscapableofamputatinghandsand
feetandofthrowingobjects.Alwaysfollowallsafety
instructionstoavoidseriouspersonalinjuryordeath.
•Read,understand,andfollowallinstructions
andwarningsintheOperator’sManualand
onthemachine,engine,andattachments.All
operatorsandmechanicsshouldbetrained.If
theoperator(s)ormechanic(s)cannotreadthis
manual,itistheowner’sresponsibilitytoexplain
thismaterialtothem;otherlanguagesmaybe
availableonourwebsite.
•Onlyallowtrained,responsible,andphysically
capableoperatorsthatarefamiliarwiththesafe
operation,operatorcontrols,andsafetysignsand
instructionstooperatethemachine.Neverlet
childrenoruntrainedpeopleoperateorservice
theequipment.Localregulationsmayrestrictthe
ageoftheoperator.
•Alwayskeeptherollbarinthefullyraisedand
lockedpositionandusetheseatbelt.
•DoNotoperatethemachineneardrop-offs,
ditches,embankments,water,orotherhazards,or
onslopesgreaterthan15degrees.
•Keepbystandersandchildrenoutoftheoperating
area.
•DoNotputyourhandsorfeetnearmovingparts.
•DoNotoperatethemachinewithoutallsafety
shields,guards,switches,andotherdevicesin
placeandinproperworkingcondition.
•Parkmachineonlevelground,disengagedrives,
setparkingbrake,stopengine,andremovekey.
Waitforallmovingpartstostopbeforeleaving
theoperator’sposition.Allowthemachineto
coolbeforeservicing,adjusting,fueling,cleaning,
orstoring.
5

Safety
SafetyandInstructionalDecals
•Keepallsafetysignslegible.Removeallgrease,
dirtanddebrisfromsafetysignsandinstructional
labels.
•Replaceallworn,damaged,ormissingsafety
signs.
•Whenreplacementcomponentsareinstalled,be
surethatcurrentsafetysignsareafxedtothe
replacedcomponents.
•Ifanattachmentoraccessoryhasbeeninstalled,
makesurecurrentsafetysignsarevisible.
•Newsafetysignsmaybeobtainedfrom
yourauthorizedExmarkequipmentdealeror
distributororfromExmarkMfg.Co.Inc.
•Safetysignsmaybeafxedbypeelingoffthe
backingtoexposetheadhesivesurface.Apply
onlytoaclean,drysurface.Smoothtoremove
anyairbubbles.
•Familiarizeyourselfwiththefollowingsafetysigns
andinstructionlabels.Theyarecriticaltothesafe
operationofyourExmarkcommercialmower.
decal93-6687
93-6687
WingDeckModelsOnly
1.Donotstephere.
decal99-8936
99-8936
1.Machinespeed4.Neutral
2.Fast5.Reverse
3.Slow
decal106-2655
106-2655
1.Warning—donottouchorapproachmovingbelts;
removethekeyandreadtheinstructionsbefore
servicingorperformingmaintenance.
decal106-5517
106-5517
1.Warning—donottouchthehotsurface.
6

Safety
decal107-3069
107-3069
1.Warning-thereisnorolloverprotectionwhentherollbar
isdown.
2.Toavoidinjuryordeathfromarolloveraccident,keep
therollbarinthefullyraisedandlockedposition
andweartheseatbelt.Lowertherollbaronlywhen
absolutelynecessary;donotweartheseatbeltwhen
therollbarisdown.
3.ReadtheOperator’smanual;driveslowlyandcarefully.
decal109-6036
109-6036
1.ReadtheOperator’smanual
2.Removetheignitionkeyandreadtheinstructionsbefore
servicingorperformingmaintenance.
3.Heightofcut
decal112-9028
112-9028
1.Warning—stayawayfrommovingparts;keepallguards
andshieldsinplace.
decal114-4465
114-4465
Non-WingDeckModels
1.Hydraulicuidservice
interval—50hours
3.Lubricateservice
interval—500hours
2.Tirepressureservice
interval—50hours
4.ReadtheOperator's
Manualbefore
servicingorperforming
maintenance
7

Safety
decal114-4466
114-4466
Non-REDandNon-SmartControllerEquippedModels
Only
1.Main,25A3.Charge,25A
2.PTO,10A4.Auxiliary,15A
decal115-9625
115-9625
SuspensionModels
1.Parking
brake—disengaged
2.Parkingbrake—engaged
decal116-5988
116-5988
AllExceptSuspensionModels
1.Parkingbrake—engaged2.Parking
brake—disengaged
decal116-8283
116-8283
1.Warning—readtheOperator'sManualforinstructions
ontorquingthebladebolt/nutto55-60ft-lb(75-81N-m).
decal116-8724
116-8724
AllLZEexceptEFIModels
AllLZS/LZXKawasakiModelsexceptREDEquipped
1.Throttle-fast4.Choke-off
2.Throttle-slow5.PTO
3.Choke-on
8

Safety
decal116-8725
116-8725
LZEEFIModelsOnly
1.Throttle-fast3.PTO
2.Throttle-slow4.Checkengine
decal116-8726
116-8726
1.ReadtheOperator’sManualforrecommendedhydrooil.
decal116-8727
116-8727
decal117-0346
117-0346
1.Fuelleakhazard—readtheOperator'sManual;donot
attempttoremovetherollbar;donotweld,drillor
modifytherollbarinanyway.
decal126-0768
126-0768
RearDischargeUnitsOnly
9

Safety
decal126-2055
126-2055
AllModelsExceptWingDeckModels
1.Wheellugnut—torqueto95ft-lb(129N-m).
2.Wheelhubnut—torqueto235ft-lb(319N-m).
3.ReadandunderstandtheOperator’smanualbefore
performingmaintenance;checktorqueafterrst100
hoursandevery500hoursthereafter.
decal126-4398
126-4398
AllModelsExceptWingDecks
1.ReadtheOperator’s
manual
3.Unlock
2.Lock
decal126-4479
126-4479
EFIREDEquippedModelsOnly
1.Engine-off3.Engine-start
2.Engine-on
decal126-6464
126-6464
SideDischargeModels
1.Thrownobject
hazard—keep
bystandersaway.
3.Cutting/dismemberment
ofhandorfoot—stay
awayfrommovingparts;
keepallguardsand
shieldsinplace.
2.Thrownobjecthazard,
mower—donotoperate
withoutthedeector,
dischargecover,or
grasscollectionsystem
inplace.
10

Safety
decal126-7875
126-7875
KohlerREDandSmartControlledEquippedModels
1.Fuselocation4.Auxiliary,15A
2.Relaylocation5.Startrelay
3.Main,20A6.Notused
decal126-8597
126-8597
WingDeckModelsOnly
1.Heightofcut2.Rangeadjustment
decal126-8760
126-8760
WingDeckModelsOnly
1.Heightofcut2.Rangeadjustment
decal126-9275
126-9275
WingDeckModelsOnly
decal133-8062
133-8062
decal135-0664
135-0664
RearDischargeModelsOnly
1.Thrownobject
hazard—keep
bystandersaway.
2.Cutting/dismemberment
ofhandandfeet—stay
awayfrommovingparts;
keepallguardsand
shieldsinplace.
11

Safety
decal135-0670
135-0670
WingDeckModelsOnly
1.Crushinghazard,hand-
readinstructionsbefore
servicingorperforming
maintenance.
2.Warning-Lockthe
deckwingsandread
theinstructionsbefore
servicingorperforming
maintenance.
decal135-1097
135-1097
1.Frontofdeck
decal135-1432
135-1432
WingDeckModelsOnly
decal135-4573
135-4573
WingDeckModelsOnly
1.Engine–off4.Pushtopofbuttonto
lowerdeck
2.Engine–on5.Pushbottomofbuttonto
raisedeck
3.Engine–start
12

Safety
decal135-7226
135-7226
1.Accessory—15A4.Enginepowerrelay
2.Power—20A5.Fanrelay
3.Enginestartrelay
decal135-7898
135-7898
WingDeckModelsOnly
1.Wheellugnut—torqueto95ft-lb(129N-m).
2.Wheelhubnut—torqueto325ft-lb(441N-m).
3.ReadtheOperator’sManualbeforeperforming
maintenance;checkthetorqueaftertherst100hours
andevery500hoursafter.
decal142-2472
142-2472
1.Accessory—15A3.Enginestartrelay
2.Power—20A4.Enginepowerrelay
g224113
MessageDisplay
AllLZEModels
AllLZS/LZXKawasakiModelsexceptREDEquipped
1.Fuel6.Hourmeter
2.Empty7.PTO
3.Half8.Parkingbrake
4.Full9.Neutral
5.Battery10.Operatorpresence
switch
13

Safety
g224114
MessageDisplay
LZSKohlerEFIModels
1.PTO4.Operatorpresence
switch
2.Parkingbrake5.Seeuser’sguidefor
operatingconditioncode
3.Neutral
decalptosymbols
PTOSwitchSymbols
1.PTO–disengage2.PTO–engage
14

Safety
decal126-8823
126-8823
LZSKohlerEFIModelsOnly
1.PTO4.Engine–start
2.Engine–off5.Throttle-fast
3.Engine–on6.Throttle-slow
decal132-5080
132-5080
“C1”ModelOnly
1.Firmestposition2.Softestposition
15

Safety
decal132-0871
132-0871
Thismachinecomplieswiththeindustrystandardstabilitytestinthestaticlateralandlongitudinaltestswiththe
maximumrecommendedslopeindicatedonthedecal.Itisimportantthateachoperatorreviewtheslopeoperation
instructionsintheoperator’smanualandreviewtheconditionsinwhichthemachineisbeingoperatedtodetermine
ifthemachinemaybeoperatedintheconditionsthatdayandonthatsite.Changestoterraincanresultina
changeinslopeoperationforanymachine.
1.Warning—readtheOperator’sManual;donotoperatethis
machineunlessyouaretrained;wearhearingprotection.
4.Ramphazard—whenloadingontoatrailer,donotuse
dualramps;onlyuseasingularrampwideenoughforthe
machineandthathasaninclinelessthan15degrees;
backuptheramp(inreverse)anddriveforwardoffthe
ramp.
2.Cuttingandpinchinghazard—keephandsandfeetaway
frommovingparts;keepallguardsandshieldsinplace.
5.Bodilyharmhazard—donotcarrypassengers;look
behindyouwhenmowinginreverse.
3.Thrownobjecthazard—keepbystandersaway.6.Tippinghazardonslopes—donotuseonslopesnear
openwater;donotuseonslopesgreaterthan15degrees.
16

Safety
decal142-2935
142-2935
1.Readtheinstructionsbeforeservicingorperforming
maintenance.
5.Checkthetirepressure(2locations).
2.Timeinterval6.Greasetheidlerpivots;refertotheOperator'sManualfor
furtherinstructions(4locations).
3.Checktheengine-oillevel.7.Greasethefrontcasterwheelbearings;refertothe
Operator’sManualforfurtherinstructions(4locations).
4.Checkthehydraulic-uidlevel;refertotheOperator's
Manualforfurtherinstructions(3locations).
8.Greasethecasterpivotsandgagewheelpivotbearings;
refertotheOperator’sManualforfurtherinstructions(5
locations).
17

Specications
Specications
Systems
Engine
•EngineSpecications:SeeyourEngineOwner’s
Manual
•EngineOilType:Exmark4–CyclePremium
EngineOil
•RPM:
–AllexceptEFIREDEquippedUnits:
◊FullSpeed:3750±50RPM(PTOnot
engaged)
◊Idle:1500+100/-250RPM
–EFIREDEquippedUnits:
RPM±100PTO
Disengaged
PTOEngaged
MaxSpeed36503650
EfcientSpeed25003400
LowSpeed15003250
FuelSystem
•Capacity:
–XandS–Series:12.0gal.(45.4L)
–E–Series:8.0gal.(30.3L)
•FuelRecommendations:
–Forbestresults,useonlyclean,fresh,unleaded
gasolinewithanoctaneratingof87orhigher
((R+M)/2ratingmethod).
–Oxygenatedfuelwithupto10%ethanolor
15%MTBEbyvolumeisacceptable.
–DoNotuseethanolblendsofgasoline(such
asE15orE85)withmorethan10%ethanol
byvolume.Performanceproblemsand/or
enginedamagemayresultwhichmaynotbe
coveredunderwarranty.
–DoNotusegasolinecontainingmethanol.
–DoNotstorefueleitherinthefueltankor
fuelcontainersoverthewinterunlessafuel
stabilizerisused.
–DoNotaddoiltogasoline.
•FuelFilter:ReplaceableIn-line
•FuelShut-OffValve:
AllUnits:1/4turn(“ON”,“OFF”).
•Fuelleveleightsegmentdisplay—righthand
controlpanel.
•Lowfuelindicatorlight.
ElectricalSystem
•ChargingSystem:FlywheelAlternator
•ChargingCapacity:
KohlerandKawasaki:15amps
KohlerEFIandBriggsEFI:20amps
KawasakiEFI:30amps
KohlerwithWingDeck:40amps
•BatteryType:
–KohlerandKawasakimodelswithoutWing
Deck:BCIGroupU1
–KohlerModelswithWingDeck:BCIGroup
31
–BriggsModels:Exmark12VNonSpillable,
AGM,MaintenanceFreeBatteryPN
142–7427,750CCA
•RecommendedMinimumBatteryCCA:
–AllKohler940and980engineswithoutWing
Deck:340CCA
–KohlerengineswithWingDeck:1000CCA
–Allotherengines:260CCA
–Briggs:750CCA
•BatteryVoltage:12Volt
•LowVoltageLight/ErrorMessage—RHcontrol
panel
•Polarity:NegativeGround
•Fuses:
Allunits:
–25ampmainfuse
–25ampchargingsystemfuse
–10ampPTOfuse
–15ampaccessoryfuse
SafetyInterlockSystem
•LCDindicatorsappearforthePTO,parkbrake,
drivelevers,andoperatorpresenceinthemessage
displayontheRHcontrolpanel.
18

Specications
•PTOmustbedisengaged,brakeengaged,and
motioncontrolleversout(neutrallock)tostart
engine.(Itisnotnecessaryfortheoperatortobe
intheseattostarttheengine.)
•OperatormustbeinseatwhenPTOisengaged,
brakeisdisengaged,ormotioncontrolleversare
movedinorenginewillstop.
•Enginewillstopifeithertheleft,theright,or
bothleversaremovedfromneutrallockposition
whilebrakeisengaged.
OperatorControls
•SteeringandMotionControl:
Note:Motioncontrolleversareadjustableto
twoheights.
–Separatelevers,oneachsideoftheconsole,
controlspeedanddirectionoftravelofthe
respectivedrivewheels.
–Steeringiscontrolledbyvaryingtheposition
oftheleversrelativetoeachother.
–Movingmotioncontrolleversoutward(in
slots)locksthedrivesysteminneutral.
•PTOEngagementSwitch:Engageselectricclutch
(todrivebelt)whichengagesmowerblades.
•ParkingBrakeLever:Engages/Disengages
parkingbrake.
•DeckHeightAdjustmentLever:Setscutting
heighttodesiredposition.
•DeckLiftPedal:Footpedalthatliftsdeck.
•DeckLiftSwitch(HydraulicCylinder)–96Inch
DeckModels:Raises/lowersthecenterdeckto
setcuttingheightandfolds/unfoldsthewings.
•TransportLock:
–Latchingposition:Automaticallylatchesat
thetransportposition.
–Unlatchingposition:Deckdoesnotlatchat
thetransportposition.
Seat
•X-Series:
–AllModelsExcept“C1”:
Deluxesuspension(adjustablespring
suspension)seatwithhighback,padded
ip-uparmrests,andintegralsafetyswitch.
Seatheightremainsthesame.SeatIsolation
Systemforreducedvibration,toenhanceride
ofstandardseat.
–“C1”Models:
Standardseatwithhighback,extrawidefoam
paddedseatcushionwithinternalsuspension,
thickbolstering,two-tonecover,padded
ip-uparmrests,integralsafetyswitch,and
SeatIsolationSystemforreducedvibration,to
enhancerideofstandardseat.
•S-Series:
–“00”Models:
Standardseatwithhighback,extrawidefoam
paddedseatcushionwithinternalsuspension,
thickbolstering,two-tonecover,padded
ip-uparmrests,integralsafetyswitch,and
SeatIsolationSystemforreducedvibration,to
enhancerideofstandardseat.
–“A1”and“A2”Models:
Deluxesuspension(adjustablespringsuspension)
seatwithhighback,paddedip-uparmrests,and
integralsafetyswitch.Seatheightremainsthe
same.SeatIsolationSystemforreducedvibration,
toenhancerideofstandardseat.
•E-Series:
–“00”or“03”Models:
Standardseatwithhighback,extrawidefoam
paddedseatcushionwithinternalsuspension,
thickbolstering,two-tonecover,padded
ip-uparmrests,integralsafetyswitch,and
SeatIsolationSystemforreducedvibration,to
enhancerideofstandardseat.
Optionalseataccessoriesforunitswith
standardseats:
◊Deluxesuspensionseatwithhighback,
(adjustablespringsuspension),padded
ip-uparmrests,andintegralsafetyswitch.
Addsapproximately1/2inch(1.3cm)to
seatheight.
◊SeatIsolationSystemforreduced
vibration,toenhancerideofstandard
seat,standardseatwithCustomRideSeat
SuspensionorDeluxeSuspensionSeat.
Addsapproximately1inch(2.5cm)to
seatheight.
–“C1”Models:
19

Specications
Standardseatwithhighback,extrawidefoam
paddedseatcushionwithinternalsuspension,
thickbolstering,two-tonecover,padded
ip-uparmrests,integralsafetyswitch,and
SeatIsolationSystemforreducedvibration,to
enhancerideofstandardseat.
–“A1”,“A2”,or“A3”Models:
Deluxesuspensionseatwithhighback,
(adjustablespringsuspension),armrests,and
integralsafetyswitch.Addsapproximately
1/2inch(1.3cm)toseatheight.
•Mounting:
–XandS-Seriesand“C1”Models:
Hingedseatframetotiltupseat.Heldintilted
positionwithproprod.Adjustableforeand
aftonseattracks.
–E-Seriesexcept“C1”Models:
Adjustableforeandaftonseattracks.
•SeatSafetySwitch:Integratedseatswitch.
Timedelayseatswitcheliminatesroughground
cut-outs.
HydrostaticGroundDriveSystem
•Twounitizedhydrostatictransmissions:
–X-Series52inchdeck,AllS-Series,andAll
E-Series:
◊12ccParkeraxialpistonpump
◊240ccParkergerolermotor
–X–Series60and72inchdecks:
◊16ccParkeraxialpistonpump
◊280ccParkergerolermotor
–96inchdeck:
◊16ccParkeraxialpistonpump
◊310ccParkergerolermotor
•HydraulicOilType:ExmarkPremiumHydroOil.
•HydraulicOilCapacity:52oz(1.5L)perside
•HydraulicFilter:P/N116-0164
•Speeds:
–E-Series48or52inchdecks:
◊0-8mph(12.9km/hr)forward.
◊0-4.5mph(7.2km/hr)reverse.
–AllE-Seriesexcept48or52inchdecksand
XandS–Series—12cc
◊0-10mph(16.1km/hr)forward.
◊0-5.5mph(8.9km/hr)reverse.
–X–Series–60and72inchdecks—16cc
◊0-11.5mph(18.5km/hr)forward.
◊0-6mph(9.7km/hr)reverse.
–X–Series–96inchdeck—16cc
◊0-10.5mph(16.9km/hr)forward.
◊0-5.5mph(8.9km/hr)reverse.
•Drivewheelreleasevalvesallowmachinetobe
movedwhenengineisnotrunning.
TiresandWheels
X-Series(AllModelsexcept”A5”):
Drive
Pneumatic(Air-Filled)
Quantity2
TreadTurfMaster
Size(60,72,&96Decks)24x12.00-12
Size(52Deck)23x9.50-12
PlyRating4
Pressure52,60,&72
Decks)
13psi(90kPa)
Pressure(96Deck)18psi(124kPa)
20