Explore One MEDIA POD User manual
360° ROTATION AUTO-TRACKING MOUNT
INSTRUCTION MANUAL
Phone sold separately.
Parts List
01: Camera
02: Indicator Light
03: Power Button
04: USB-C Charging Port
05: Pedestal
06: 1/4 inch Thread Rod
07: Adjusting Nut
08: 1/4 inch Tripod Adapter
09: USB-C Charge Cable
10: Phone Mount
11. Tablet Mount
0103
04
05
08
09
2
10
11
0607
02
3
Whether you are live streaming, creating social media content or simply on a
video call, you can always stay in frame with the Media Pod 360° Auto-Track-
ing Mount. Through the use of subject tracking technology and a highly re-
sponsive, built-in camera, this handy mount enables an attached smart device
to follow a subject’s movements, making it easy to create dynamic videos
and stay engaged with viewers without needing additional apps, Bluetooth
or WiFi. Designed to support smart devices up to 10 inches, the mount has a
full 360° range of rotation to follow your every step and is tripod adaptable
to accommodate different positioning needs. It is also water resistant to
protect against splashing water when filming outside and has a long-lasting
rechargeable battery that will allow you to film with fewer disruptions.
4
Instructions
Specifications
– Press and hold the power button for 3 seconds to turn on the Media Pod.
The indicator light will flash in blue and the product will start. To power off
the Media Pod, press and hold the power button for 3 seconds. The device
will shut off when not in used for more than 15 minutes.
– Once the Media Pod is powered on, it will follow the subject instantly. The
device only tracks the closest subject that is within 1-5 meters(3-16 feet). If
multiple subjects are in front, the device will select the closest or in line of
sight of the camera. When a subject is not in range, the indicator light will
flash blue till a subject is recognized.
– When the device is in low battery, the indicator light will flash red. Use the
USB-C cable to charge. Wall power charger not included. Indicator light will
remain red when charging and will turn off when battery is fully charged.
– The Media Pod includes a 1/4 inch universal thread on top and bottom for
use of different accessories such as, tripods, selfie stick, lights, cameras, etc.
Built-in Auto Tracking Camera: Yes
App or Bluetooth Required: No
Plug and Play: Yes
Water Resistant: Yes; IPX4
Battery: 1000mAh Rechargeable
Battery Runtime: 6 hours
Charge Time: 2 hours
Charging: USB-C port 5V-1A
Maximum Load Capacity: 500g (1.1lbs)
Tripod Compatible: Yes
WARNING!: This product contains batteries, please do not place the product
in high temperature, high humidity environment to avoid accidents.
Do not use your hands to rotate the device.
5
Mounts
When using the included phone or tablet mounts, screw in the mount and
using the adjusting nut bracket to tighten and aligned with the Media Pod
tracking camera.
LED Lights • Digital Cameras • Webcams • Action Cameras
*Additional attachments maybe necessary and sold separately.
Phone and Tablets sold separately.
Phone Mount
Tablet Mount (up to 10in dia.)
Compatibility with Other Devices*
+ =
+ =
6
CAUTION: Changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate the equipment. Note: This
equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer and
birth defects or other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
WARNING:
PROP 65:
7
Notes
#88-83030
©2022 Explore Scientic, LLC.
1010 S 48th Street, Springdale, AR 72762
All rights reserved.
explorescienticusa.com | 866.252.3811
Made in China.
V102022HIPO
Table of contents
