Extreme Networks 1U Manual

Supporting XEN-R000295
HARDWARE INSTALLATION GUIDE
1U, 1.5U, and 2U Universal Kit for Four Post
Racks
53-1002944-06 Rev AA
August 2019
*53-1002944-06 Rev AA*

Copyright © 2019 Extreme Networks, Inc. All Rights Reserved.
Legal Notice
Extreme Networks, Inc. reserves the right to make changes in specications and other information contained in this document and its
website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such
changes have been made.
The hardware, rmware, software or any specications described or referred to in this document are subject to change without notice.
Trademarks
Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United
States and/or other countries.
All other names (including any product names) mentioned in this document are the property of their respective owners and may be
trademarks or registered trademarks of their respective companies/owners.
For additional information on Extreme Networks trademarks, please see: www.extremenetworks.com/company/legal/trademarks
Open Source Declarations
Some software les have been licensed under certain open source or third-party licenses. End-user license agreements and open source
declarations can be found at: www.extremenetworks.com/support/policies/software-licensing
1U, 1.5U, and 2U Universal Kit for Four Post Racks
2 53-1002944-06 Rev AA

Contents
Preface...................................................................................................................................................................................................................................5
Conventions..................................................................................................................................................................................................................................................5
Notes, cautions, and warnings.....................................................................................................................................................................................................5
Text formatting conventions......................................................................................................................................................................................................... 5
Command syntax conventions....................................................................................................................................................................................................6
Documentation and Training.................................................................................................................................................................................................................6
Training..................................................................................................................................................................................................................................................6
Getting Help................................................................................................................................................................................................................................................. 6
Subscribing to Service Notications.........................................................................................................................................................................................7
Providing Feedback to Us......................................................................................................................................................................................................................7
1U, 1.5U, and 2U Universal Kit for Four-Post Racks Installation (6740T only)...................................................................................................9
Introduction...................................................................................................................................................................................................................................................9
Safety precautions ....................................................................................................................................................................................................................................9
Time and items required...................................................................................................................................................................................................................... 10
Parts list.......................................................................................................................................................................................................................................................10
Flush-front mounting the device in the rack................................................................................................................................................................................11
Attaching the front brackets.......................................................................................................................................................................................................12
Attaching the bracket extensions to the device.................................................................................................................................................................13
Installing the device in the rack................................................................................................................................................................................................ 14
Attaching the rear brackets to the extensions.................................................................................................................................................................... 15
Attaching the rear brackets to the rack posts.....................................................................................................................................................................17
Flush-rear (recessed) mounting the device in the rack............................................................................................................................................................18
Attaching the front brackets to the rear of the device..................................................................................................................................................... 18
Attaching the bracket extensions to the front of the device......................................................................................................................................... 19
Installing the device in the rack................................................................................................................................................................................................ 20
Attaching the rear brackets to the bracket extensions at the front of the device.................................................................................................21
Attaching the rear brackets to the front rack posts.......................................................................................................................................................... 23
1U, 1.5U, and 2U Universal Kit for Four Post Racks
53-1002944-06 Rev AA 3

1U, 1.5U, and 2U Universal Kit for Four Post Racks
4 53-1002944-06 Rev AA

Preface
• Conventions............................................................................................................................................................................................................ 5
• Documentation and Training............................................................................................................................................................................6
• Getting Help............................................................................................................................................................................................................6
• Providing Feedback to Us.................................................................................................................................................................................7
This section discusses the conventions used in this guide, ways to provide feedback, additional help, and other Extreme Networks®
publications.
Conventions
This section discusses the conventions used in this guide.
Notes, cautions, and warnings
Notes, cautions, and warning statements may be used in this document. They are listed in the order of increasing severity of potential
hazards.
NOTE
A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related information.
ATTENTION
An Attention statement indicates a stronger note, for example, to alert you when trac might be interrupted or the device might
reboot.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to hardware,
rmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to you. Safety
labels are also attached directly to products to warn of these conditions or situations.
Text formatting conventions
Text formatting conventions such as boldface, italic, or Courier font may be used to highlight specic words or phrases.
Format Description
bold text Identies command names.
Identies keywords and operands.
Identies the names of GUI elements.
Identies text to enter in the GUI.
italic text Identies emphasis.
Identies variables.
Identies document titles.
1U, 1.5U, and 2U Universal Kit for Four Post Racks
53-1002944-06 Rev AA 5

Format Description
Courier font Identies CLI output.
Identies command syntax examples.
Command syntax conventions
Bold and italic text identify command syntax components. Delimiters and operators dene groupings of parameters and their logical
relationships.
Convention Description
bold text Identies command names, keywords, and command options.
italic text Identies a variable.
[ ] Syntax components displayed within square brackets are optional.
Default responses to system prompts are enclosed in square brackets.
{ x | y | z } A choice of required parameters is enclosed in curly brackets separated by vertical bars. You must select
one of the options.
x | yA vertical bar separates mutually exclusive elements.
< > Nonprinting characters, for example, passwords, are enclosed in angle brackets.
... Repeat the previous element, for example, member[member...].
\ Indicates a “soft” line break in command examples. If a backslash separates two lines of a command
input, enter the entire command at the prompt without the backslash.
Documentation and Training
To nd Extreme Networks product guides, visit our documentation pages at:
Current Product Documentation www.extremenetworks.com/documentation/
Archived Documentation (for earlier versions and
legacy products)
www.extremenetworks.com/support/documentation-archives/
Release Notes www.extremenetworks.com/support/release-notes
Hardware/Software Compatibility Matrices https://www.extremenetworks.com/support/compatibility-matrices/
White papers, data sheets, case studies, and other
product resources
https://www.extremenetworks.com/resources/
Training
Extreme Networks oers product training courses, both online and in person, as well as specialized certications. For more information,
visit www.extremenetworks.com/education/.
Getting Help
If you require assistance, contact Extreme Networks using one of the following methods:
Documentation and Training
1U, 1.5U, and 2U Universal Kit for Four Post Racks
6 53-1002944-06 Rev AA

Extreme Portal Search the GTAC (Global Technical Assistance Center) knowledge base, manage support cases and service
contracts, download software, and obtain product licensing, training, and certications.
The Hub A forum for Extreme Networks customers to connect with one another, answer questions, and share ideas and
feedback. This community is monitored by Extreme Networks employees, but is not intended to replace specic
guidance from GTAC.
Call GTAC For immediate support: 1-800-998-2408 (toll-free in U.S. and Canada) or [phone]. For the support
phone number in your country, visit: www.extremenetworks.com/support/contact
Before contacting Extreme Networks for technical support, have the following information ready:
• Your Extreme Networks service contract number and/or serial numbers for all involved Extreme Networks products
• A description of the failure
• A description of any action(s) already taken to resolve the problem
• A description of your network environment (such as layout, cable type, other relevant environmental information)
• Network load at the time of trouble (if known)
• The device history (for example, if you have returned the device before, or if this is a recurring problem)
• Any related RMA (Return Material Authorization) numbers
Subscribing to Service Notications
You can subscribe to email notications for product and software release announcements, Vulnerability Notices, and Service
Notications.
1. Go to www.extremenetworks.com/support/service-notication-form.
2. Complete the form with your information (all elds are required).
3. Select the products for which you would like to receive notications.
NOTE
You can modify your product selections or unsubscribe at any time.
4. Click Submit.
Providing Feedback to Us
Quality is our rst concern at Extreme Networks, and we have made every eort to ensure the accuracy and completeness of this
document. We are always striving to improve our documentation and help you work better, so we want to hear from you! We welcome all
feedback but especially want to know about:
• Content errors or confusing or conicting information.
• Ideas for improvements to our documentation so you can nd the information you need faster.
• Broken links or usability issues.
If you would like to provide feedback to the Extreme Networks Information Development team, you can do so in two ways:
• Use our short online feedback form at https://www.extremenetworks.com/documentation-feedback/.
• Email us at [e-mail].
Please provide the publication title, part number, and as much detail as possible, including the topic heading and page number if
applicable, as well as your suggestions for improvement.
Providing Feedback to Us
1U, 1.5U, and 2U Universal Kit for Four Post Racks
53-1002944-06 Rev AA 7

1U, 1.5U, and 2U Universal Kit for Four Post Racks
8 53-1002944-06 Rev AA

1U, 1.5U, and 2U Universal Kit for Four-
Post Racks Installation (6740T only)
• Introduction..............................................................................................................................................................................................................9
• Safety precautions ...............................................................................................................................................................................................9
• Time and items required.................................................................................................................................................................................10
• Parts list................................................................................................................................................................................................................. 10
• Flush-front mounting the device in the rack.......................................................................................................................................... 11
• Flush-rear (recessed) mounting the device in the rack......................................................................................................................18
Introduction
Use the following instructions to install a device in a 19-in. (48.3 cm) EIA rack using the 1U, 1.5U, and 2U Universal Kit for Four Post
Racks (XEN-R000295).
Observe the following when mounting this device:
• The device can be installed so that the port side is either ush with the front posts or recessed with the non-port side ush with
the rear posts. A recessed position allows a more gradual bend in the ber-optic cables connected to the device and less
interference in the aisle at the front of the rack.
• Use Electronic Industries Association (EIA) standard racks. Provide space in a 19-in. (48.3 cm) EIA rack, as required for the
device, with a minimum distance of 24 in. (609.60 mm) and a maximum distance of 32 in. (812.80 mm) between the front
and back posts.
• Two people are required to install the device in a rack. One person should hold the device, while the other while the other
secures the device in the rack.
• Before mounting your device, review any specic installation and facility requirements in the Hardware Installation Guide for the
device.
• Hardware devices illustrated in these procedures are only for reference and may not depict the device you are installing into the
rack.
Safety precautions
DANGER
Use safe lifting practices when moving the product.
DANGER
Mount the devices you install in a rack as low as possible. Place the heaviest device at the bottom and progressively place
lighter devices above.
CAUTION
Make sure the airow around the front, and back of the device is not
restricted.
1U, 1.5U, and 2U Universal Kit for Four Post Racks
53-1002944-06 Rev AA 9

CAUTION
Use the screws specied in the procedure. Using longer screws can damage the
device.
CAUTION
Never leave tools inside the chassis.
CAUTION
Do not use the port cover tabs to lift the module. They are not designed to support the weight of the module, which can fall
and be damaged.
CAUTION
To prevent damage to the chassis and components, never attempt to lift the chassis using the fan or power supply handles.
These handles were not designed to support the weight of the chassis.
Time and items required
Allow 15 to 30 minutes to complete this procedure. Note the following requirements to ensure correct installation and operation.
The following items are required to install the device using the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks:
• #2 Phillips torque screwdriver
• 1/4-inch slotted-blade torque screwdriver
Parts list
The following parts are provided with the 1U, 1.5U, and 2U Universal Kit for Four Post Racks Installation (XEN-R000295).
Time and items required
1U, 1.5U, and 2U Universal Kit for Four Post Racks
10 53-1002944-06 Rev AA