Extreme USB SP3001-15 User manual

USB 3.0 SP3001-15
1-Port USB 3.0 15m Active Copper Extension Cable
Quick Start
Guide
This product works with AIA USB3 Vision™ compliant devices.
Before you get started, install any software required to operate your USB 3.0 device(s).
1
1
Computer
USB 3.0 Device
(e.g. Camera)
Attach your USB 3.0 device into the SP3001-15’s USB 3.0 receptacle. AIA USB3 Vision™locking USB connectors
are supported if needed.
3
2
Plug the SP3001-15’s USB 3.0 host connector into a USB 3.0 port on your computer.
USB 3.0 Host
Connector
mounting slots for cable tie
USB Power
Connector
2
2
1
1
USB 3.0 Locking
Receptacle
USB 3.0 SP3001-15
Active Cable
It is recommended to plug the SP3001-15’s USB power connector into any USB port on your computer.
This step is essential if your USB 3.0 device is not self-powered or draws more than 2.5W of power.
3
The SP3001-15 cable is not backward compatible with USB 2.0/1.1 devices. Per USB-IF specication, USB 3.0 devices must attempt enumeration on USB
3.0 rst. If your USB 3.0 device enumerates on USB 2.0 rst, then your device is out of spec and will not operate with this cable.
Conveniently secure your configuration by wrapping the included cable tie around the USB 3.0 receptacle’s two mounting slots.

FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, an Analog Devices brand, declare under our sole responsibility that the USB 3.0 SP3001-15, to which this
declaration relates, is in conformity with European Standards EN 55024, EN 55032, EN 61000, and RoHS Directive 2011/65/EU + 2015/863/EU.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/ NMB-3 (B)
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government
guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product and operate for intended use only. Do not attempt to open the product casing
as this may cause damage and will void warranty. Use only the power supply provided with this product. When not in use, product should be
stored in a dry location between -20°C and 70°C.
Certification and Compliance
Icron Technologies Corporation
An Analog Devices Brand
4664 Lougheed Hwy., Suite 221
Burnaby, BC
V5C 5T5, Canada
[phone]
Copyright © 2022 Icron | An Analog Devices Brand.
All rights reserved. Information contained herein is
subject to change without notice.
90-01201-D01