Ezviz DP1 User manual
www.ezvizlife.com
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries. ALL RIGHTS
RESERVED.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all
other information hereinafter are for description and explanation only. The information contained in the
Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the
latest version in the ™ website (http://www.ezvizlife.com).
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou
Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user
manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed,
partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise
stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied,
regarding to the Manual.
Trademarks Acknowledgement
™, ™, and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION
MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD
PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE
TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HIKVISION’S TOTAL
LIABILITY FOR ALL DAMAGES EXCEED THE PURCHASE PRICE THE PRODUCT.
HIKVISION does not undertake any liability for personal injury or property damage, as the result of product
interruption or service termination cause by: a) improper installation or usage other than as requested; b)
the protection of national or public interests; c) Force Majeure; d) yourself or the third party, including not
limitation, using any third party’s products, software, applications, and among others.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR
OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR
OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
The purpose of the Products is to provide an adequate warning in the event of illegal encroachment in
certain area; however, the proper installation of the Products will not eliminate, but only reduce, that
accidents will not occur or that there will be no personal injury or property loss as a result.
You are highly recommended to raise your vigilance and strengthen the safety awareness in the daily life.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE
LAW. YOU FUTHER AGREE THAT THIS PRODUCT IS ONLY FOR CIVIL USE, AND HIKVISION SHALL NOT BE
LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES, SUCH AS THIRD PARTY
RIGHTS INFRINGEMENT, MEDICAL TREATMENT, SAFETY EQUIPMENT OR OTHER SITUATIONS WHERE THE
PRODUCT FAILURE COULD LEAD TO DEATH OR PERSONAL INJURY, OR WEAPON OF MASS DESTRUCTION,
CHEMINCAL AND BIOLOGICAL WEAPON, NUCLEAR EXPLOSION, AND ANY UNSAFE NUCLEAR ENERGY USES
OR ANTI-HUMANITY USAGES. YOU SHOULD UNDERTAKE ALL RESPONSIBILITIES FOR LOSSES OR DAMAGES
RESULTING FROM THE ABOVE USAGES WHATSOEVER.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This product generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this product does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator
and your body.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or
SAVE THIS MANUAL FOR FUTURE REFERENCE
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the Radio Equipment
Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou Hikvision Digital Technology Co., Ltd. declares that the radio equipment type [CS-DP1, CS-DP1i,
CS-DP1C, CS-DP1S, CS-DP2, CS-DP2i, CS-DP2C, CS-DP2S, CS-DP3, CS-DP3i, CS-DP3C, CS-DP3S ] is in compliance with
Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Safety Instruction
Due to the product shape and dimension, the name and address of the importer/manufacturer are printed
on the package.
1
Attention
•Do not expose the camera to the harsh environment like high temperature, humid,
salt mist, or rain, otherwise, the device may be damaged.
•Do not press the sensor or lens of the camera, otherwise, the device may be
damaged.
•Do not pull the wire of the camera hardly, and protect yourself from being cut by
the wire. Damage to the wire due to inappropriate operation is not included in the
warranty.
•Use the exclusively power adapter to charge the panel, otherwise, the system may
be damaged.
Box Content
Camera (x1) Panel (x1) Mounting Base (x1)
Screws (x3) Base Buckle (x1) Wire Buckle (x1)
Cable (x1) Power Adapter (x1) Quick Start Guide (x1)
2
Overview
Power on/off Touch Screen
Micro SD Card Slot
Wakeup Button Sensor Power Interface
LoudspeakerCamera Interface
Sensor
Bell
Sensor
Lens
Panel
Camera
Do not block the sensors.
3
Panel Interface
Mounting Hole
Hook
Camera Interface
Installation
•If you used to install the peephole, remove it and install the device in the same place.
If not, please drill a hole of diameter about 16.5 to 30mm and about 145cm distance
from the ground to have a good viewing effect.
Measure the door's thickness and select
the appropriate screw.
Thickness Screw
35 to 60mm
60 to 85mm
85 to 100mm
Mounting Base
For hanging portable charger.
4
Turn the screw into the back of camera. Tear off the release paper.
Pass screw and wire through the door.
You can roll up the paper to help.
Adjust camera's position and
push it close to the door gently.
Connect the mounting base
with the camera's wire.
Insert the buckle and
press it tightly to fix it.
5
Adjust the mounting base's
position and tighten the screw.
Put the wires in the groove
and insert the buckle.
Slide the panel into the mounting base. Hold the power button to power on the panel.
Power on
Hold the power button for 3 to 5 seconds
to power up the panel.
6
Album
Record
Set
Tap to set detailed parameters as
you desired such as Display, Monitoring,
Date, and etc.
Connect to Wi-Fi
1 2
Display Monitoring Bell Setting Date
Firmware InfoStorageRestore Wi-Fi
Settings
3
t
Wi-Fi
Manual Connect Mobile Setup
4
xxxxx
yyyyy
Manual Connect
Select your Wi-Fi and enter password.
7
Add to EZVIZ App
1Create an user account.
-Connect your mobile phone to Wi-Fi.
-Download and install the EZVIZ app by searching “EZVIZ” in App Store and Google
PlayTM.
-Launch the app and register an EZVIZ user account following the start-up
wizard.
2Add a camera to EZVIZ.
-Log in the EZVIZ app.
-On the Home screen, tap “+” on the upper-right corner to go to the scan QR
code page.
-Scan the QR code.
XXXX
XXXX
XXXX
XXXX
Firmware Info
Tap Firmware Info to view the QR code.
8
Charge the Panel
Connect the panel with the power outlet via power adapter.
Power Outlet
Power Adapter
•Recommended Charging Time: 5 to 6 hours.
•You can also charge the panel via portable charger and hang it on the hook.
9
10
11
12
13
14
2
t
xxxxx
yyyyy
15
-
-
-
2
-
-
-
XXXX
XXXX
XXXX
XXXX
Other manuals for DP1
1
Table of contents
Languages:
