FADE KING FK-S User manual

24h Customer Support
Email:[email protected]
FK-S|FADE KING Hair Trimmer
CONTENTS
Components 1
Parameters 2
How to Recharge 2
Fixed-Length Function 3
Cutter Assembly and Disassembly 4
Cutter Cleaning and Maintenance 5
Precautions For Use 6
Warranty Card 7

Components 1 2
ON/OFF
Combs Brush
Standard 5V/US
charging port
Parameters
How to Recharge
InputUse time 180 minutes 5V 1A
Charge time Charging
method
2 hours USB Type-C
Voltage Material
3.0V Zinc Alloy
Power Blade
10W 5Cr13 T-blade
Speed type Battery
6500 RPM
(±200) 1200mAh
Sharp Stainless
Steel Blade
1. Insert the charger into the tail of the clipper, connect to the
power to start charging.
2. The liquid crystal indicator lights up, indicating that it start
charging, when the red light changes to the green light fully charged.
Note: when the power is switched on after charging, the indicator
lights up to indicate that the charging head is reversed or drawn to
be replaced immediately.

1. To determine the length of haircut.
2. To select the appropriate limit comb.
1 mm
1
2 mm 3 mm
Mount the limit comb:
1. Align the limit comb with the blade
edge.
2. Slightly forward push to mount it.
Disassemble the limit comb: Just pull
hard the limit comb.
Fixed-length Function 3
Warm tip: do not disassemble the knife head without any skill.
Cutter Assembly and Disassembly 4
A: Features( 1、2、3mm ) 3 lengths adjustment to control the
hair length.
Such as a screwdriver with the
rotary cutter head under part,
remove the cutter head
To prevent the knife from falling,
use another hand to hold it
Blade Removal
The blade spring is aligned with the
spring A on the knife head B.
Then, put in two fixed screws, and
hold down.
Tighten the screw with a screwdriver
to ensure, the head of the knife will
not fall off.
2
A
B

Cutter Cleaning and Maintenance 5
1.Please do not disassemble the product.
2.The hair trimmer can not be washed.
Please keep it away from wet conditions.
3.The product can only be cleaned by cloth with little water or mild
soap solution.
4.Do not charge the product under environment above 40°C.or
below 0°C.
※The product can produce little heat duringusing or charging,
which is normal.
※Please remove the battery safely and return it to the specified
places when the battery runs out. Never discard it casually.
Precautions For Use 6
Taper Blade Cleaning
Clear up the blade with cleaning
brush.
Taper Blade Maintenance
Before or after use, maintain the
blade by dripping some oil on the
red point places like the left picture.

Following Guarantees Provided For The Product
1.The product is produced through strict quality management and
inspection.
2.lf malfunction occurred in fair use, the consumer can enjoy free
warranty service according to the warranty card in the purchasing
store or our repair center.
(The battery and blade belong to consumables, not coverd by
warranty but provided with fee)
3.No free services for the following situations:
A.Damages caused by repair or reformation not approved
by our company.
B. Damages caused by false or neglectful use, or by accidents.
C. Damages caused by natural disasters or abnormal voltage.
D. Damages caused by ignoring attentions provided with in the
product specification.
4.The product is only guaranteed when provided the warranty
card instead of the invoice.
Product Name Professional Hair Clipper
Month Date Year
Warranty Period
To Month Date Year
One year from the
purchasing date
Product Model
Purchasing Date
Customer
Address
Address
Name
Name
Name
Phone
Number
Phone
Number
Point of
Sale
Warranty Card 7