F&U CA 2788SU User manual

INSTRUCTIONS MANUAL
CAR AUDIO
Model No.: CA 2788SU
Please read the instructions before use

Key Functions:
1. Power/MUT Button
Power control: Press to turn on. Press and hold to turn off.
Mute control: While unit is on, press once to temporarily turn off the volume, press again to recover to
the previous volume.
2. B/A Button
In Radio mode, press to change among FM1-FM2-FM3.
In Radio mode, press & hold to store the desired channel, each band can store 6 channels.
In MP3 mode, press this button, then rotate the VOLUME knob (or on remote control) to select any
track with number: “0”,”1”,”2”,”3”,”4”,”5”,”6”,”7”,”8”,”9”.
3. Rotary knob
Select / Volume –Rotary Knob On Unit Panel
In normal mode, rotate this knob to increase/decrease the volume
level. To access various sound parameters, press this button to cycle
through the following adjustable settings:
VOLUME > BASS > TREBLE > BALANCE > FADER > LOUD > STEREO
4. Remote Control Infrared Reception
Reception for remote control
5. LCD Display
Display the time and other selected function.

6. CLK Button
Press to display and adjust the time.
7. Button
In Radio mode, press to fast forward to your desired channel.
In MP3 mode, press to fast forward the track.
8. USB Slot –Music
Insert USB for MP3 playback
9. MOD Button
Press to change between Radio and Playback function
(Radio –USB –Aux In)
10. Reset button
Press the RESET Button if:
1. Unit Hangs up.
2. Error Symbol on the LCD Screen
3. Function buttons do not work.
The unit will return back to previous original settings.
11. 1/ PAUSE Button
In MP3 mode, press to pause playback, press again to resume playback.
12. 2/INT Button
In MP3 mode, press to listen to the first 10 seconds of each song.
13. 3/RPT Button
In MP3 mode, press to repeat the song.
14. 4/RDM Button
In MP3 mode, press to play song randomly.
15. 5/-10 & Folder button
In MP3 mode, press this button on to rewind 10 songs at one time.
Press and hold to select previous folder.

16. 6/+10 & Folder button
In MP3 mode, press this button to forward 10 songs at one time.
Press and hold to select next folder.
17. Aux In Function
Choose to connect and play any compatible external audio equipment.
18. Button
In Radio mode, press to tune backward to your desired channel.
In MP3 mode, press to rewind backward the track.
19. 2nd USB Slot
For charging your mobile phone.
20. EQ Button
Equalization select function –POP –ROCK –CLASS.
21 Number Knobs on remote control
Remote Control

Main Functions:
Electronic Tuning Stereo FM Receiver with ID3
Dual USB Slot with Aux In
Support charging mobile phone and listen to playback at the same time
Digital LCD Display / Real Time Clock
Electronic Audio Control: VOL/BAS/TRE/BAL/FAD
Electronic Preset EQ: POP/ROCK/CLASS
Night Illumination –BLUE
4 Channels·
Remote Control & ISO Connector
·Support USB
· Support Audio file format: MP3 & WMA
·Support mobile charging with USB Slot
This unit only supports FAT16 or FAT32 file system.
Please do not format its file system when formatting the USB card.
Basic Control:
1. Power switch / Mute
1) Press PWR button to turn on the unit. Press to turn off the unit.
2) When the unit is on, press and hold MUTE button to mute the volume.
Press again to recover to previous volume level.
2. Mode Button
1) Plug in USB card under radio mode, the unit will change to USB mode;
This unit will change to Radio mode when USB is removed.
2) Press MOD button to change the model when USB is plugged in.
USB mode will be preselected when switching on the unit.
3. Time display and setting
1) Time will be displayed after slightly press the CLK button.
The LCD display will return back to its original display after 5 seconds.
2) Press and hold CLK button to set the time, time on the display will be blinking.

Then slightly rotate the rotary knob or press VOL-/VOL+ on remote control to set the hour,
to confirm the hour setting, press SEL. Then again rotate the rotary knob or press
VOL-/VOL+ on remote control to set the minute.
To confirm the time setting, simply press SEL button.
4. Audio Mode Selector
1) Rotate volume knob to increase/decrease the volume level.
2) Press volume knob selector, “VOL>BAS>TRE>BAL>FAD>LOUD>EQ>DX>ST”
on the display, then rotate the volume knob selector to increase/decrease the
volume, bass, treble, balance, fader, loud On/Off, EQ, DX/LOC, Stereo/Mono.
3) To activate the EQ function on the panel, rotate the volume knob selector until
EQ is found on the display; then rotate the volume knob selector to select your desired
EQ mode: “POP-CLASS-ROCK-EQ OFF”.
4) To activate the EQ function with remote control, simply by pressing EQ on the remote;
then EQ will be found on the LCD display, then press EQ button again to select
“POP-CLASS-ROCK-EQ OFF”.
Radio Control:
1. Band Control
1) Press BND button to select the band, repeatedly to cycle through 3 radio bands:
FM1-FM2-FM3.
2) Hold and press BND button, the radio will scan up all the strongest stations and
preset automatically in 1-6 number keys.
In FM mode, 18 stations can be stored from FM1-FM2-FM3 mode.
2. Tuning Button
1) Press </> to tune the desire radio station, then press and hold any 1-6 number to store it.
MP3 Control:
1. This unit can read the files which found in USB by plugging it into the slots.
2. When it is playing the tracks from USB, USB icon is found on the display.
3. When the file type is MP3; then MP3 icon is found on the display.

4. When the file type is WMA; then WMA icon is found on the display.
5. Press fast forward to go to next track and press rewind backward to rewind to the previous
track.
6. When MP3 is playing, press “1” number button to pause it and to resume it by pressing “1”
again.
7. Press “2” number button to listen to the first 10 seconds of each song. Press again to cancel.
8. Press “3” number button to start or cancel the repeat function.
The cycle is:
9. Press “4” number button to play all the MP3 files randomly. Press again to cancel.
10. Press “5” number button to play the previous 10 tracks.
Press and hold to rewind to the previous folder.
11. Press “6” number button to play the next tracks.
Press and hold to forward to the next folder.
ID3 TAG
1. If the MP3/WMA file is available with ID3 TAG. The following information will be shown on LCD
display automatically.
~ Song name with file type
~ Title
~ Artist
~ Directory
2. During MP3/WMA mode, press APS button on unit or remote control to activate the track
search mode, with below methods:
~ Press the number button (either from the unit or the remote) or rotate the rotary knob to
select the desired track. For example, you are now playing the first song and you want to swift
to track 59, press APS button, “TRK SCH” will be found on the LCD display, then rotate the rotary
knob to select from the number “0”,”1”,”2”,”3”,”4”,”5”,”6”,”7”,”8”,”9” to select “5” or press “5”
on the unit or remote; so that the first digit “5” will be found on LCD Display. Then wait for 3
seconds, it will move to the second digit automatically; then again rotate the rotary knob or
press number knob on remote; so that the second digit “9” will be found on the LCD Display.
To confirm your selection, press “SEL” button.
~ You may always cancel your track selection by pressing APS button on the unit or remote.

Installation
The unit has antitheft locked box design, please follow the below installation instruction:
1. Push the trim plate against the chassis until it is fitted.
2. Insert the unit into the dashboard then push the unit into the metal chassis until it is locked.
Attention:
1. Choose the mounting location where the unit will not interface with the normal driving function
of the driver.
2. Before completing the unit installation, connect the wiring temporality and make sure it is all
connected up properly and the unit and system work properly.
3. For safe installing, use the mounting hardware provided by the manufacturer.
Removal:
Insert the levers supplied with the unit into the grooves at both sides of the unit until they click. Pulling
the levers makes it possible to remove the unit from the dashboard.
DISASSEMBLY AND ASSEMBLY INSTRUCTIONS
Assembly instructions
Connect the unit harness with lock and push them
together inside,
insert the unit harness into instrument panel,
and push the player into the metal harness until it is
locked.
If the assemble angle is above 30, the unit may not
work properly.
The installation place should not affect the driver’s normal
operations or injure the passengers when the car is braked suddenly.
Disassembly instructions
Take the plastic frame off, and insert the keys into the holes in the face panel, then pull the keys hard to
take player out of the instrument panel.

Trouble Shooting
Symptom
Cause
Solution
No Power
Speaker cable is disconnected.
Poor power connection.
Check to see that all the power
and speaker leads are securely
connected.
The fuse is burnt out.
Replace the fuse.
No Sound
Volume is set to the minimum.
Adjust volume to a desired level.
Wiring is not proper.
Check wiring connection.
The radio doesn’t work, and the
radio station automatic
selections do not work.
The antenna cable is not
connected, or the signal is too
weak.
Select the station in manual
mode. Insert the antenna cable
firmly.
The player is on, but it doesn’t
play any track.
The file format is not MP3
format.
Make sure the songs you store in
the USB IS MP3 format.
Specifications
Power –12V DC
Ground System –Negative Electrode
Maximum Current –5A (MAX)
Installation Size (L*W*H) –178 X 85 X 50mm
Weight –0.65 kg
Working Temperature - -20C ~ +60C

Audio
High Power Output –4x20 Watts
Speaker impedance –4 Ohms ~ 8 Ohms
FM Tuning
Frequency Range –87.5 –108 MHZ
Usable Sensitivity –10dB (S/N 30 dB) 15 dB
Declaration of Conformity
This product complies with the standards of the below directives:
RED Directive 14/53/EU
RoHS2 Directive 11/65/EU
amended by the CE-marking Directive 93/68/EEC
EXCLUSIVE IMPORTER
Amiridis-Savvidis S.A.
87A, 17th November Str –PC 55535 –Pylea - Greece
Tel: [phone], Fax: [phone]
www.amiridis-savvidis.gr