Farenheit DVD-22T User manual

DVD-22/ DVD-22T
Single-DIN A/V Multimedia Source
Touch Sensor
DVD/CD/MP3/MP4
AM/FM Radio
Built-in TV tuner
Owner’s Manual
Take the time to read through this owner’s manual.
Familiarity with installation and operation procedures will help you obtain the best
Performance from your new DVD-receiver.

Page- 1
Table of Contents
Table of Contents.......................................................................................................................1
Important Safeguards.................................................................................................................2
Accessories .......................................................................................................................3
Installation/Un-Installation ..............................................................................................................4
Wiring Connections......................................................................................................................5
Detachable Control Panel ........................................................................................................6
Panel Controls……………..........................................................................................................7
IR Remote Controls ........................................................................................................................8
General Operations....................................................................................................................9
Digital Tuner..............................................................................................................................10
SD/MMC Cards/ USB Operations .............................................................................................11
Disc operations...................................................................................................................... 13
MP3 overview..................................................................................................................... .16
Setup MENU................................................................................................................................17
Anti-theft system..........................................................................................................................21
Note on Discs.............................................................................................................................. 22
Troubleshooting Guide .............................................................................................................23
Specification.............................................................................................................................24

Page -2
Important Safeguards
zUsing the device at temperature below -10 may cause the breakage of the device. BEFORE℃
USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED
TEMPERATURE!
zRead carefully through this manual to familiarize yourself with this high-quality sound system.
zDisconnect the vehicle's negative battery terminal while mounting and connecting the unit.
zWhen replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with
a higher amperage rating may cause serious damage to the unit.
zDO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to
the eyes.
zMake sure that pins or other foreign objects do not get inside the unit; they may cause
malfunctions, or create safety hazards such as electrical shock or laser beam exposure.
zIf you have parked the car for a long time in hot or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
zDO NOT open covers and do not repair yourself. Consult the dealer or an experienced
technician for help.
zMake sure you disconnect the power supply and aerial if you will not use the system for a long
period or during a thunderstorm.
zMake sure you disconnect the power supply if the system appears to be working incorrectly,（e. g,
making unusual sounds, smelling strange, emitting smokes from inside or liquid having gotten
inside it）Have a qualified technician check the system.
zThe unit is designed for negative terminal of the battery, which is connected to the vehicle metal.
Please confirm it before installation.
zDo not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it
may overload or burn out the power amplifier.
zDo not install the detachable panel before connecting the wire.
zDon't remove the detachable panel when encoding.

Page- 3
Accessories
Package contains the following accessories for installation and operation of the unit.
(1) Washer, Spring
Washer, M5 Nut 1 each
(2) Mounting Strap 1
(3) Screw
(4) Bolt
1
4
(5) Mounting Collar 1
(6) Release Key 2
(7) Rubber Cushion 1
Owner’s Manual Remote Controller Panel Carrying Case
AUX IN Cable

Page -4
Installation/Un-Installation
First complete the electrical connections, and then check them for correctness.
Installation
This unit can be installed in any dashboard having an opening as shown on the picture. The
dashboard should be 4.75 – 5.56 mm thick in order to be able to support the unit.
1. Insert mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver.
Make sure that lock lever（※）is flush with the mounting collar (not projecting outward).
2. Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber
cushion.
3. Insert trim plate.
When you prepare to insert trim plate, please check its direction. Once it was up side down, it
cannot be fixed.
Un-installation
Remove Trim Ring and insert Release Keys into left and right side-end holes as shown in below
picture and pull the unit out of the dashboard.
Lock lever（※）

Page- 5
Wiring Connections
Make sure you have good chassis ground. A good ground connection will eliminate most electrical
noise problems. A good chassis ground requires a tight connection to the vehicle’s metal chassis.
The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust,
or dirt for a good electrical connection.
Using the ISO Connector
1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle carefully before
connecting, incorrect connection may cause serious damage to this unit.
3. Cut the connector, connect the colored leads of the power cord to the car battery as shown in the
color code table below for speaker and power cable connections.
Location Function
Connector A Connector B
1 Rear Right(+)---Purple
2 Rear Right(-)---Purple/Black Stripe
3 Front Right(+)---Grey
4 Battery 12V (+)/yellow Front Right(-)---Grey/Black Stripe
5 Auto Antenna/blue Front Left(+)---White
6 Front Left((-)---White/Black Stripe
7 ACC+/red Rear Left(+)---Green
8 Ground/black Rear Left(-)---Green/Black Stripe
**TV antenna is for
DVD-22T only.

Page -6
Caution: Do not interchange the connection of the wiring!!!
For some car models you may need to modify wiring of the supplied power cord. Contact your
authorized car dealer before installing this unit.
Remark: When you back a car, screen display switch to Rear Camera automatically
Detachable Control Panel
Detaching the control panel
zTurn the Power off.
zPress OPEN button release the panel.
zPull the panel out.
Attaching the control panel
zInsert the left side of the control panel into the main unit.
zPress the control panel right side until the “click” sound is heard.
Caution:
DO NOT insert the control panel from the right side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case
and be careful not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part.
Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in
isopropyl alcohol to clean the socket on the back of the control panel.

Page- 7
Panel Controls
1. Power/Mute
2. BAND
3. PREVIOUS
4. VOL +
5. NEXT
6. DISP
7. AS/PS
8. LCD
9. IR sensor
10. OPEN
11.MODE.
12.OK
13.VOL-
14. PRESET 1/play pause
15. PRESET 2./RPT
16. PRESET 3./INT
17. PRESET 4/RDM
18. PRESET 5/STOP
19. PRESET 6/MENU
20.AUX IN JACK
21.USB SLOT
22.SD SLOT
23.EJECT
24.DISC SLOT
25.RESET

Page -8
IR Remote Control
REPLACING THE BATTERY
Remote Control comes with a CR-2025 Lithium Battery included.
1. Remove the Battery Holder from the back of the Remote Control.
2. Insert a CR-2025 Lithium battery with the positive (+) mark upward. Insert the Battery Holder into
the back of the Remote Control.
Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery,
consult a doctor immediately.
Do not re-charge, short, disassemble or heat the battery or dispose it in fire.
Do not expose or bring into contact the battery with other metallic materials. Doing this may cause
the battery to give off heat, crack or start a fire.
When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may
give off heat, crack or start a fire.
1. MODE
2. POWER
3. BND/RDM
4. ENTER
5. Cursor / / /
6. STEREO/MONO
7. LOC/ PROG
8. P.SCN/RPT
9. SEEK-/
10. LOUD
11. OSD
12. STOP/ PBC
13. Digit 0-9
14.
15. MUTE
16. MENU
17. SUB-T
18. SETUP
19. ANGLE
20. INT
21. VOL+
22. A-B/ZOOM
23. SEL
24. SEEK+/ 
25. VOL-
26. AUDIO/ GOTO
+3V
(CR 2025)

Page- 9
General Operations
Reset the Unit
In case the unit is malfunctioned or need to reset to factory default setting, press RESET button in
inner panel then the unit will be reset.
Power on/off
Press POWER key button to turn on the unit.
Long press POWER key on front panel or press POWER button on RC to power off the unit.
Under Power on mode, short press comes in mute.
Mode Setting
Press MODE button on front panel or remote control to change mode in a sequence of: Tuner
=>DVD => USB =>Card=>TV => AV IN=> Tuner
(When USB/ Card/ DVD available.)
Loudness
Press button on remote control to set LOUD ON/OFF.
DISP button
Short press shows time, Long press adjust clock. Press VOL+/- adjust hours then press SEL can
adjust minutes. Press DIS quit clock adjust.
Band button
In radio mode, press to select FM1-FM2-FM3-AM1-AM2; In TV mode, press to select TV system
Volume Control
Press VOL +/- button increase/ decrease the volume level.
Audio Setting
Press SEL button on the Remote Control or press OK key on the front panel to select the audio
setting:
VOL=>BASS =>TREBLE => BALANCE => FADER =>LOUD=> EQ=>SUB-W.
=>STEREO=>DX=>BEEP=>12H/24H=>EXIT
Press VOL +/- buttons on remote to select the audio setting item (or press the VOL +/- on front
panel to select the setting item).
.
Notes: If turn off the power, all the settings of each mode will be saved.
- If you don’t adjust setting within 5 seconds after selecting the desired setting item, the unit will
automatically return to the current mode.
On-Screen Display (OSD).
Press one time to show the current playing track/ played time information, long press twice to show
the current playing track/ remainder time for play, long press again to clear the information.

Page -10
Digital Tuner
Band selection
Press MODE button to select the RADIO mode.
Press the BAND button to select the desired band: FM1=> FM2 => FM3 => AM1=>AM2
STEREO/MONO
In FM mode, press SETREO/MONO button on remote control to select stereo or mono sound
reception.
Manual/ automatic tuning
zManual tuning: press the /buttons on remote control(or on the front panel ) and hold
for 2 seconds to enter the manual tuning mode. Press the / buttons on the panel or on
the Remote repeatedly to select a station downward or upward step by step.
zAutomatic tuning: press the / buttons on remote control(or on the front panel ), the
automatic search will start. It will play when finds the station.
Preset station 1-6 play and setting
zPlay preset station: Short press number key 1-6 on remote control or panel to play the preset
station 1-6.
zPreset station setting: during manual turning or automatic tuning, press and hold the number
1-6 buttons on remote or panel to store the preset station 1-6
Remark: You can store up to a total of 30 radio stations in the memory (18FM, 12AM).
AS (Auto Store) / PS (Preset Scan)
AS (Auto Store): In tuner mode, Press the RPT/P.SCN button on the remote or panel press the
AS/PS button and hold for 2 seconds to store radio station’s with the best reception to the preset
buttons automatically.
PS (Preset Scan): In tuner mode, short press this button to scan the preset memorized station,
each preset scan for 5 seconds. Press again to stop operation.

Page- 11
SD/MMC Cards & USB Operations
USB Flash Memory
To play MP3/ MP4/ WMA files from a USB flash memory, insert a USB flash memory into the USB
port on the right side of the unit. The unit will start playing MP3/MP4/ WMA files on the USB flash
memory automatically. Or press the MODE button to select USB after pressing POWER button to
turn on the unit.
SD/MMC Card
To play MP3/ MP4/ WMA files on a SD/MMC card, insert the card into the card slot (you should
press the OPEN button on the panel to flip down front panel and insert the card into card slot.) The
unit will start playing MP3/ MP4/ WMA files on the card memory automatically. Or press the MODE
button to select Card after pressing POWER Button to turn on the unit.
PAUSE/ PLAY
Press the PLAY/ PAUSE button to pause the playback. Press the button again to resume.
STOP
Press the STOP button on remote or on the panel to stop playback. Press the PLAY/ PAUSE button
to resume. If the card or USB is removed, the resume function will be cancelled.
Press the STOP button twice to stop the playback totally. Press the PLAY/ PAUSE button to start
playback from the beginning
Selecting Tracks
If the MP3/ MP4/ WMA files are stored in the folders on the USB drive or Card, the unit will start by
playing the first song in the first folder. After playing all the files sequentially in the first folder, the
unit will play all the files sequentially in the next folder. The unit will continue playing through all of
the folders on the USB drive or card in this manner. Press the button to play the previous
track/chapter. Press the  to play the next track/chapter. Press the digital buttons (0-9) to select
the desired track/chapter.
Select File From Folder
When playing MP3/MP4/WMA file, press “ ” on remote control, cursor move to
folder “..”, then press “Enter” to confirm selection.
Or, press “5/ ” on front panel, then press “▇” to select folder “..”, then press “ ”
to confirm selected folder.
GOTO Function
Long press AUDIO/GOTO button on remote control to show GOTO menu, use 0-9 to input track/
time to go to directly.
Fast Forward and Backward
Press the /buttons and hold for two seconds to select the fast playing in backward or
forward in 2 times, press and hold for two seconds again for 4times, repeat this operation for 8 times
=> 16 times =>32 times => play. Press the PLAY/PAUSE button to return to normal playback.
Note: During the card or USB playback when Fast backward or forward gets to the beginning of the
playing another track, it resumes normal playback.

Page -12
Repeat
Press the RPT button on remote control or the panel for RPT1 (repeat the current playing file) =>
RPT ALL (repeat all folders) => RPT folder (repeat current folder) => RPT OFF.
Repeat A-B Function
1. Press A-B button on the remote at the starting point of the section you want to repeat (point A).
2. Press A-B button again at the ending point of the section you want to repeat (point B). Section
A-B repeating starts.
3. Press A-B button again to cancel the A-B repeat function.
Random
Press the RDM button on remote or on the panel to play all song tracks in random order.
Note: This function is only for audio files.
Intro Playback
Press the INT button on remote or on the panel to play the beginning of every track for 10 seconds
in sequence. Press again to cancel INT play.
Note: This function is only for audio files.
Programming the Playback
1. Press PROG button on the remote open program menu.
2. Use / / / buttons to select the program position and use digit 0-9 buttons to select the
desired track.
3. Move the cursor to select START and press ENTER button on remote to play.
5. Press PROG again or move the cursor to select EXIT to cancel program play.
ZOOM
Press ZOOM button and hold for 2 seconds on remote to activate zoom function in the following
sequences: ZOOM 2 => ZOOM 3 =>ZOOM 4 => ZOOM 1/2=>ZOOM 1/3=>ZOOM 1/4=>ZOOM
OFF.
Rotate Picture (only for picture files)
In picture mode, press /buttons to rotate picture 90 degrees.
System Menu
In USB/ Card mode, press SETUP button on remote to show system menu. Press / / / buttons
to set system data, press this button again to save input data and exit system menu.

Page- 13
Discs operations
Glossary
PBC (Play Back Control)
Play Back Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs
contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc
contains still images, it can playback high definition of still image.
Title
The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes
possible to record several films on one disc. For example, if a disc contains three films, they may be
divided into Title 1, Title 2 and Title 3. You can easily use the functions to search.
Chapter
A title can be divided into several blocks, so that every block can be operated as a unit, the unit is
called chapter.
The chapter contains a unit at least.
Discs for playback
zThis unit can play:
DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG/CD-R/-RW/DVD±R/±RW.
zThe following file types are supported:
Audio files: MP3 (*.mp3)
WMA (*.wma)
Video files: MP4 (*.avi, Divx3.11/ 4.0/5.0 and XVID)
MPEG 2(*.vob)
MPEG 1(*.dat)
Picture file: JPEG (*.jpg)
zISO 9660 or ISO 9660 +Joliet format - Max. 30 characters
zMax. Track number is 448
zMax. nested directory is 8 levels
zThe max. album number is 99
zThe max. length of each track is 99 minutes 59 seconds
zSupported sampling frequency for MP3 disc: 8 KHz to 48 (44.1 KHz preferably) KHz
zSupported bit-rates of MP3 disc are: 32 - 320 kbps (128 kbps preferably).
zFollowing formats are NOT supported *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, files with DRM.
zOpen session discs are NOT supported.
Loading a disc
1. Turn the power on.
2. Press the Open button on the front panel to flip it down.
3. Insert the disc with the printed side facing upward into the slot. The panel will be closed
automatically. The DVD mode will be turned on automatically. The monitor will show the disc
content.
4. Press Open button on the panel and Eject button inner the panel to eject the disc.
If the disc is not removed for about 10 seconds after reject, the disc will reinserted automatically.
When disc in/out, put front panel at 0 degree to avoid distort the disc.
5 You may also choose the playing mode using the MODE button.

Page -14
Playing/pausing
To ensure good system performance, wait until the unit finishes reading the disc information before
proceeding.
Press the PLAY/ PAUSE button to start/ pause the playback. In pause mode press it again to
resume the playback.
Stop
During playback press the STOP button on the RC or on the panel. Playback will be stopped. Press
the PLAY/ PAUSE button again to start playback from the position at which it was stopped. If the
disc is removed, the resume function is cancelled.
Press the STOP button twice to finally stop the playback. Press the PLAY/ PAUSE button to start
playback from the very beginning
Playing the previous/ next track/ chapter
1. During playback press the button to start playing the previous track/chapter.
2. Press the to start playing the next track/chapter.
3. Press the digital buttons (1-9, 0) buttons to enter the desired track/chapter number.
Speed forward and backward
Long press the /buttons on the panel or press and hold for 2 seconds the or
on the RC to select the speed of fast playing in backward or forward direction: X2, X4, X8, X16, X32.
Press the PLAY/PAUSE button to return to normal playback.
Note: During the disc playback when Fast/ Reverse Playback gets to the beginning of the playing
another track, it resumes normal playback.
Repeat playback
Press the RPT/P.SCN button on the RC or on the panel once or more times to repeat the playback:
- For VCD/CD: display appears Repeat Track => Repeat ALL => Off (Some discs do not support
this functions).
- For DVD: display appears Repeat Chapter => Repeat Title =>ALL =>Off
- For File disc: display appears RPT ONE => RPT ALL=> RPT FOLDER => Off
Repeat A-B function
1. During playback, press A-B button on the remote control at the starting point of the section you
want to repeat (point A).
2. Press A-B button again at the ending point of the section you want to repeat (point B). Section
A-B repeating starts.
3. Press A-B button again to cancel the A-B repeat function.
Random playback (for CD/VCD/MP3 discs)
During disc playback, press the RDM button on the RC or on the panel to start random playback of
the disc. Press again to cancel.
Intro playback (for CD/VCD discs)
You can play the beginning of every track for 10 seconds in sequence. Press the INT button on
remote control or on the panel to start intro play of whole disc. Press again to cancel.

Page- 15
PBC (Playback Control) function (for VCD only)
If you insert a VCD with PBC, playback starts from the beginning of the 1st track automatically.
1. Long press PBC/STOP button to activate interactive menu on screen during playback.
2. If the menu consists of titles, you can select a desired one using the digit 0-9 buttons.
3. The VCD starts playing the selected title automatically or press ENTER button to confirm the
selected track for playback.
MENU function (for DVD only)
1. Press MENU button on the RC or on the panel to s activate interactive DVD menu on screen
during playback
2. Long press MENU button on the RC to s activate interactive DVD title menu on screen during
playback
3. If the menu consists of titles, you can select a desired one cursor the /or /buttons.
4. press ENTER button to confirm the selected track for playback.
Programming the playback
1. Press PROG button on the RC to enter program list.
2. Use , , , buttons and digit buttons to enter the number of the desired track to be on
selected position.
For DVD and File disc, select title and chapter number.
For VCD and CD, select track number.
3. Move the cursor to select START and press ENTER to play.
4. If you want to change page, move the cursor to NEXT or prev to change next or
previous page
5. Press PROG again or move the cursor to select EXIT to cancel program play.
Selecting different audio modes
zFor DVD disc: press AUDIO on the RC repeatedly to select the audio language to listen (if the
disc supports multi-language mode).
zFor VCD disc: press AUDIO on the RC repeatedly to select the following modes:
MONO LEFT →MONO RIGHT→MIX MONO→STEREO→EXIT
Changing the subtitle language (for DVD only)
Press SUBTITLE button on the RC to select the preferred language for the disc menu. When the
selected language is recorded on the disc then this language will automatically be selected. If not,
the first language recorded on the disc is displayed.
Changing size
Press and hold for 2 seconds the A-B/ZOOM on the RC. The picture will be enlarged accordingly:
X2 => X3 =>X4 => X1/2=>X1/3=>X1/4X=>Normal.
Changing angle (for DVD only)
If DVD discs support multi-angle playback, press ANGLE on the RC button to playback images in
different camera angles. If discs doesn't support multi-angle playback, this function will not work. If
no operation within 1 second, angle description will disappear.

Page -16
MP3 overview
Notes on MP3:
zMP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.
zThis product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.
zThe unit can read MP3 files written in the format compliant with ISO 9660. However it does not
support the MP3 data written by the method of packet write.
zThe unit can not read an MP3 file that has a file extension other than “.mp3”.
zIf you play a non- MP3 file that has the “.mp3” extension, you may hear some noise.
zIn this manual, we refer to what are called “MP3 file” and “folder” in PC terminology as “track” and
“album”, respectively.
zMaximum number of directory level is 8, including the root directory. Maximum number of files
and folders per disc is 448.
zThe unit may not play tracks in the order of Track numbers.
zThe unit plays only the audio tracks if a disc contains both audio tracks and MP3 files.
zWhen playing a disc of 8 kbps or “VBR”, the elapsed playing time in the display window will not
be correct and also the intro play may not function properly. “VBR”: Variable Bit Rate.
Notes on creating your own CD-R or CD-RW containing MP3 files:
zTo enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of
44.1 kHz and a fixed bit rate o f 128 kbps.
zDO NOT store more than 448 MP3 files per disc.
zFor ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including
the root directory (folder).
zWhen CD-R disc is used, playback is possible only for discs, which have been finalized.
zMake sure that when MP3 CD-R or CD-RW is burned that it is formatted as a data disc and NOT
as an audio disc.
zYou should not write non-MP3 files or unneeded folders along with MP3 files on the disc
otherwise it takes a long time until the unit starts to play MP3 files.
zWith some CD-R or CD-RW media, data may not be properly written depending on its
manufacturing quality. In this case, data may not be reproduced correctly. High quality CD-R or
CD-RW disc is recommended.
zUp to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x is
required.
zNote that the unit may not play Tracks in the order that you wrote them to the disc.
1. Audio files:
MP3, WMA
2. Video files:
MPEG4 TM1 3.11, 4X, 5X and 6X versions
Nero Digital TM2
Real time MPEG2 MP@ML display
Real time MPEG1 D1 (720X480X30/ 720X576X25) decoding

Page- 17
Setup Menu
•Press SETUP button to enter the system settings main menu;
•Press cursor /buttons to move along icons on the top navigation bar on settings main menu.
Select one of the setup pages: General, Speaker, Downmix, Audio;
•Press cursor /buttons to choose a setting or return to the Setup Page;
•Press cursor button to enter the highlighted setting;
•Press ENTER button on remote contro confirm your setting.
General settings
Speaker settings
Menu
entry Function
Downmix
Here you can set the
format in which the DVD
sound should be played
back. STEREO = analog
stereo signal RIGHT /
LEFT = Dolby Pro Logic
stereo signal (2 channel
sound) SURROUND =
Virtual surround sound If
STEREO has been
switched on, “STR“ will
appear, for RIGHT /
LEFT, “LTRT“ will appear,
and for SURROUND,
“VSR“.
Menu
entry Function
TV
Display
Here you can adjust the output
format for the DVD playback
according to your preferences.
Angle
Mark
This function is indicated in the
device menu but not supported by
the device.
OSD
language This menu item allows you to set
the language of this menu.
Captions
This function displays subtitles as
long as those are available on the
data carrier and the function is
activated.
Screen
Saver
Chose ON or OFF about last
memory ,chose ON ,turn off the
sreen the memory will be
save,chose OFF turn on the unit
will be back to the default setting .

Page -18
Dolby settings
Menu
entry
Dual
mono
With this menu item
you can select the type
of Left and Right
channel audio output.
Stereo is normal
Stereo, Mono L is all
sound on the Left Audio
output, Mono R is all
sound on the Right
channel. The “Mix
Mono” function only
works when a DVD is
being played in DTS
5.1 mode.
Video settings
Menu
entry
Sharpness
This serves to set
the sharpness of the
image (high /
medium / low).
Brightness This serves to set
the brightness of the
image (- 20 to + 20).
Contrast This serves to set
the contrast of the
image (- 10 to +20)

Page- 19
Preference settings
Menu entry Function
TV Type
This setting enables the selection of the appropriate TV standard. PAL is the
customary standard in Europe. NTSC is the customary standard in the US and
Japan. Only select the MULTI option if your TV can play back both formats. Here the
output signal is automatically adjusted to the standard of the inserted DVD. If the
“MULTI” setting is selected, “AUTO” will be displayed to the left of the selection
menu.
Audio
This enables the selection of the desired dubbed language. If the language selected
here is not available on the inserted data carrier, the first language that is found will
be played back.
Subtitle
This enables the selection of the desired subtitles. If the subtitles selected here are
not available on the inserted data carrier, the first subtitles that are found will be
played back.
Disc Menu
This enables the selection of the desired menu language. If the language selected
here is not available on the inserted data carrier, the first language that is found will
be played back
Parental
This serves to set the desired age rating.
1) Child = Kid safe
2) G = some guidance advisable
3) PG = Parental guidance suggested, some
material may not be suitable for children
4) PG 13 = Parents strongly cautioned, some
material may be inappropriate for children under 13
5) PGR = Restricted, under 17 requires
accompanying parent or adult guardian
6) R = Restricted viewing
7 ) NC17 = No one 17 and under admitted
8) 18 or older = for Adult Entertainment or X rated
movies and NO PARRENTAL is for General
Audiences (All Ages).
After setting the age rating,
you will be prompted to enter
a password. The factory
default password is set to
1369. Enter this through the
number buttons on the remote
control. Now select “YES” or
“NO” with the arrow buttons.
Then confirm your selection
with the "ENTER" button.
Password This function serves to protect the selected settings. The factory default password is
1369.
Default This function resets the DVD device settings to the factory default settings.